diff --git a/qcom/pm7325.dtsi b/qcom/pm7325.dtsi
new file mode 100644
index 000000000000..ddfdde1f358e
--- /dev/null
+++ b/qcom/pm7325.dtsi
@@ -0,0 +1,61 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	#address-cells = <2>;
+	#size-cells = <0>;
+	interrupt-controller;
+	#interrupt-cells = <4>;
+
+	qcom,pm7325@1 {
+		compatible = "qcom,spmi-pmic";
+		reg = <1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm7325_tz: qcom,temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm7325_gpios: pinctrl@8800 {
+			compatible = "qcom,pm7325-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+&thermal_zones {
+	pm7325_temp_alarm: pm7325_tz {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+		thermal-governor = "step_wise";
+		thermal-sensors = <&pm7325_tz>;
+
+		trips {
+			pm7325_trip0: trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			pm7325_trip1: trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "critical";
+			};
+
+			pm7325_trip2: trip2 {
+				temperature = <145000>;
+				hysteresis = <0>;
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/qcom/pm7325b.dtsi b/qcom/pm7325b.dtsi
new file mode 100644
index 000000000000..0ca5f7732a39
--- /dev/null
+++ b/qcom/pm7325b.dtsi
@@ -0,0 +1,68 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	#address-cells = <2>;
+	#size-cells = <0>;
+	interrupt-controller;
+	#interrupt-cells = <4>;
+
+	qcom,pm7325b@3 {
+		compatible = "qcom,spmi-pmic";
+		reg = <3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm7325b_tz: qcom,temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm7325b_gpios: pinctrl@8800 {
+			compatible = "qcom,pm7325b-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm7250b_vib: qcom,vibrator@df00 {
+			compatible = "qcom,qpnp-vibrator-ldo";
+			reg = <0xdf00>;
+			qcom,vib-ldo-volt-uv = <3000000>;
+			qcom,disable-overdrive;
+		};
+	};
+};
+
+&thermal_zones {
+	pm7325b_temp_alarm: pm7325b_tz {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+		thermal-governor = "step_wise";
+		thermal-sensors = <&pm7325b_tz>;
+
+		trips {
+			pm7325b_trip0: trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			pm7325b_trip1: trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "critical";
+			};
+
+			pm7325b_trip2: trip2 {
+				temperature = <145000>;
+				hysteresis = <0>;
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/qcom/yupik-pmic-overlay.dtsi b/qcom/yupik-pmic-overlay.dtsi
new file mode 100644
index 000000000000..b47e3d16e5e1
--- /dev/null
+++ b/qcom/yupik-pmic-overlay.dtsi
@@ -0,0 +1,218 @@
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+
+#include "pmk8350.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmr735a.dtsi"
+
+&pm7325_gpios {
+	key_vol_up {
+		key_vol_up_default: key_vol_up_default {
+			pins = "gpio6";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			power-source = <1>;
+		};
+	};
+};
+
+&pmk8350_vadc {
+	/delete-node/ pm8350_ref_gnd;
+	/delete-node/ pm8350_vref_1p25;
+	/delete-node/ pm8350_die_temp;
+	/delete-node/ pm8350_vph_pwr;
+
+	/delete-node/ pm8350b_ref_gnd;
+	/delete-node/ pm8350b_vref_1p25;
+	/delete-node/ pm8350b_die_temp;
+	/delete-node/ pm8350b_vph_pwr;
+	/delete-node/ pm8350b_vbat_sns;
+
+	/delete-node/ pmr735b_ref_gnd;
+	/delete-node/ pmr735b_vref_1p25;
+	/delete-node/ pmr735b_die_temp;
+
+	/* PM7325 Channel nodes */
+	pm7325_ref_gnd {
+		reg = <PM7325_ADC7_REF_GND>;
+		label = "pm7325_ref_gnd";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	pm7325_vref_1p25 {
+		reg = <PM7325_ADC7_1P25VREF>;
+		label = "pm7325_vref_1p25";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	pm7325_die_temp {
+		reg = <PM7325_ADC7_DIE_TEMP>;
+		label = "pm7325_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	pm7325_vph_pwr {
+		reg = <PM7325_ADC7_VPH_PWR>;
+		label = "pm7325_vph_pwr";
+		qcom,pre-scaling = <1 3>;
+	};
+
+	pm7325_quiet_therm {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		label = "pm7325_quiet_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	pm7325_cam_flash_therm {
+		reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+		label = "pm7325_cam_flash_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	pm7325_sdm_skin_therm {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		label = "pm7325_sdm_skin_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	pm7325_wide_rfc_therm {
+		reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+		label = "pm7325_wide_rfc_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&pmk8350_adc_tm {
+	io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>,
+			<&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>,
+			<&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>,
+			<&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>,
+			<&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+
+	pm7325_quiet_therm {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm7325_cam_flash_therm {
+		reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm7325_sdm_skin_therm {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pm7325_wide_rfc_therm {
+		reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pmk8350_xo_therm {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+};
+
+&thermal_zones {
+	quiet-therm-usr {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-governor = "user_space";
+		thermal-sensors = <&pmk8350_adc_tm PM7325_ADC7_AMUX_THM1_100K_PU>;
+		wake-capable-sensor;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+
+	camera-therm-usr {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-governor = "user_space";
+		thermal-sensors = <&pmk8350_adc_tm PM7325_ADC7_AMUX_THM2_100K_PU>;
+		wake-capable-sensor;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+
+	sdm-skin-therm-usr {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-governor = "user_space";
+		thermal-sensors = <&pmk8350_adc_tm PM7325_ADC7_AMUX_THM3_100K_PU>;
+		wake-capable-sensor;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+
+	rear-cam-therm-usr {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-governor = "user_space";
+		thermal-sensors = <&pmk8350_adc_tm PM7325_ADC7_AMUX_THM4_100K_PU>;
+		wake-capable-sensor;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+
+	xo-therm-usr {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-governor = "user_space";
+		thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		wake-capable-sensor;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+};
+
+&pm7325_tz {
+	io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>;
+	io-channel-names = "thermal";
+};
+
+&pmr735a_tz {
+	io-channels = <&pmk8350_vadc PMR735A_ADC7_DIE_TEMP>;
+	io-channel-names = "thermal";
+};
diff --git a/qcom/yupik.dtsi b/qcom/yupik.dtsi
index 4050cb4d5098..48ee2e97ae98 100644
--- a/qcom/yupik.dtsi
+++ b/qcom/yupik.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/soc/qcom,ipcc.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/spmi/spmi.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h>
 
@@ -919,6 +920,149 @@
 				  <CONTROL_TCS 0>;
 	};
 
+	spmi_bus: qcom,spmi@c440000 {
+		compatible = "qcom,spmi-pmic-arb";
+		reg = <0xc440000 0x1100>,
+		      <0xc600000 0x2000000>,
+		      <0xe600000 0x100000>,
+		      <0xe700000 0xa0000>,
+		      <0xc40a000 0x26000>;
+		reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+		interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "periph_irq";
+		interrupt-controller;
+		#interrupt-cells = <4>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+		cell-index = <0>;
+		qcom,channel = <0>;
+		qcom,ee = <0>;
+	};
+
+	spmi_debug_bus: qcom,spmi-debug@6b12000 {
+		compatible = "qcom,spmi-pmic-arb-debug";
+		reg = <0x6b12000 0x60>, <0x7820b0 0x4>;
+		reg-names = "core", "fuse";
+		clocks = <&aopcc QDSS_CLK>;
+		clock-names = "core_clk";
+		qcom,fuse-disable-bit = <24>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		qcom,pmk8350-debug@0 {
+			compatible = "qcom,spmi-pmic";
+			reg = <0 SPMI_USID>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			qcom,can-sleep;
+		};
+
+		qcom,pm7325-debug@1 {
+			compatible = "qcom,spmi-pmic";
+			reg = <1 SPMI_USID>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			qcom,can-sleep;
+		};
+
+		qcom,pm8350c-debug@2 {
+			compatible = "qcom,spmi-pmic";
+			reg = <2 SPMI_USID>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			qcom,can-sleep;
+		};
+
+		qcom,pm8350b-debug@3 {
+			compatible = "qcom,spmi-pmic";
+			reg = <3 SPMI_USID>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			qcom,can-sleep;
+		};
+
+		qcom,pmr735a-debug@5 {
+			compatible = "qcom,spmi-pmic";
+			reg = <4 SPMI_USID>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			qcom,can-sleep;
+		};
+	};
+
+	qcom,pmic_glink {
+		compatible = "qcom,pmic-glink";
+		qcom,pmic-glink-channel = "PMIC_RTR_ADSP_APPS";
+		qcom,subsys-name = "adsp";
+		qcom,protection-domain = "tms/servreg", "msm/adsp/charger_pd";
+
+		battery_charger: qcom,battery_charger {
+			compatible = "qcom,battery-charger";
+		};
+
+		qcom,ucsi {
+			compatible = "qcom,ucsi-glink";
+		};
+
+		altmode: qcom,altmode {
+			compatible = "qcom,altmode-glink";
+			#altmode-cells = <1>;
+		};
+	};
+
+	qcom,pmic_glink_log {
+		compatible = "qcom,pmic-glink";
+		qcom,pmic-glink-channel = "PMIC_LOGS_ADSP_APPS";
+
+		qcom,battery_debug {
+			compatible = "qcom,battery-debug";
+		};
+
+		spmi_glink_debug: qcom,spmi_glink_debug {
+			compatible = "qcom,spmi-glink-debug";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			/* Primary SPMI bus */
+			spmi@0 {
+				reg = <0>;
+				#address-cells = <2>;
+				#size-cells = <0>;
+
+				qcom,pm8350b-debug@3 {
+					compatible = "qcom,spmi-pmic";
+					reg = <3 SPMI_USID>;
+					qcom,can-sleep;
+				};
+			};
+
+			/* Secondary (QUP) SPMI bus */
+			spmi@1 {
+				reg = <1>;
+				#address-cells = <2>;
+				#size-cells = <0>;
+
+				qcom,smb1394-debug@b {
+					compatible = "qcom,spmi-pmic";
+					reg = <11 SPMI_USID>;
+					qcom,can-sleep;
+				};
+
+				qcom,smb1394-debug@c {
+					compatible = "qcom,spmi-pmic";
+					reg = <12 SPMI_USID>;
+					qcom,can-sleep;
+				};
+
+			};
+		};
+	};
+
+	thermal_zones: thermal-zones {
+	};
+
 	tcsr_mutex_block: syscon@1f40000 {
 		compatible = "syscon";
 		reg = <0x1f40000 0x20000>;
@@ -1097,6 +1241,16 @@
 						    <&glink_cdsp>,
 						    <&glink_wpss>;
 			};
+
+			qcom,pmic_glink_rpmsg {
+				qcom,glink-channels = "PMIC_RTR_ADSP_APPS";
+			};
+
+			qcom,pmic_glink_log_rpmsg {
+				qcom,glink-channels = "PMIC_LOGS_ADSP_APPS";
+				qcom,intents = <0x800 5
+						0xc00 3>;
+			};
 		};
 
 		glink_cdsp: cdsp {