ARM: dts: msm: Add VADC and ADC_TM thermistor nodes for shima

Add VADC and ADC_TM nodes for thermistor channels for PM8350, PM8350b,
PMK8350 and PMR735b on shima. Add corresponding thermal zones for
thermistors.

Change-Id: I841bd1de77a536e2d2c0840720043e7113833a96
This commit is contained in:
Jishnu Prakash 2020-06-16 15:02:41 +05:30
commit 9a75d714cb

View file

@ -16,6 +16,13 @@
power-source = <1>;
};
};
pmr735b_smb_skin {
pmr735b_smb_skin_default: pmr735b_smb_skin_default {
pins = "gpio3";
bias-high-impedance;
};
};
};
&pm8350c_gpios {
@ -40,6 +47,222 @@
};
};
&pmk8350_vadc {
pinctrl-names = "default";
pinctrl-0 = <&pmr735b_smb_skin_default>;
/delete-node/ pmr735a_ref_gnd;
/delete-node/ pmr735a_vref_1p25;
/delete-node/ pmr735a_die_temp;
pm8350_quiet_therm {
reg = <PM8350_ADC7_AMUX_THM1_100K_PU>;
label = "pm8350_quiet_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pm8350_cam_flash_therm {
reg = <PM8350_ADC7_AMUX_THM2_100K_PU>;
label = "pm8350_cam_flash_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pm8350_wide_rfc_therm {
reg = <PM8350_ADC7_AMUX_THM4_100K_PU>;
label = "pm8350_wide_rfc_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pm8350b_usb_conn_therm {
reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>;
label = "pm8350b_usb_conn_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pm8350b_wl_chg_therm {
reg = <PM8350B_ADC7_GPIO2_100K_PU>;
label = "pm8350b_wl_chg_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pmr735b_smb_skin_therm {
reg = <PMR735B_ADC7_GPIO3_100K_PU>;
label = "pmr735b_smb_skin_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
&pmk8350_adc_tm {
io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU>,
<&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU>,
<&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>,
<&pmk8350_vadc PM8350B_ADC7_AMUX_THM4_100K_PU>,
<&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>,
<&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>,
<&pmk8350_vadc PMR735B_ADC7_GPIO3_100K_PU>;
pm8350_quiet_therm {
reg = <PM8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pm8350_cam_flash_therm {
reg = <PM8350_ADC7_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pm8350_wide_rfc_therm {
reg = <PM8350_ADC7_AMUX_THM4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pm8350b_usb_conn_therm {
reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pm8350b_wl_chg_therm {
reg = <PM8350B_ADC7_GPIO2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pmk8350_xo_therm {
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pmr735b_smb_skin_therm {
reg = <PMR735B_ADC7_GPIO3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
&thermal_zones {
quiet-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PM8350_ADC7_AMUX_THM1_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
camera-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PM8350_ADC7_AMUX_THM2_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
rear-cam-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PM8350_ADC7_AMUX_THM4_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
conn-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PM8350B_ADC7_AMUX_THM4_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
wlc-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PM8350B_ADC7_GPIO2_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
xo-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM1_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
charger-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PMR735B_ADC7_GPIO3_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
&qupv3_se5_i2c {
#address-cells = <1>;
#size-cells = <0>;