diff --git a/qcom/holi-pnangn-common-overlay.dtsi b/qcom/holi-pnangn-common-overlay.dtsi index bfcf959ab5d1..6457229927e1 100644 --- a/qcom/holi-pnangn-common-overlay.dtsi +++ b/qcom/holi-pnangn-common-overlay.dtsi @@ -108,103 +108,6 @@ status = "ok"; }; - -&tlmm { - - nfc { - nfc_int_active: nfc_int_active { - /* active state */ - mux { - /* GPIO 9: NFC Read Interrupt */ - pins = "gpio9"; - function = "gpio"; - }; - - config { - pins = "gpio9"; - drive-strength = <2>; /* 2 MA */ - bias-disable; - }; - }; - - nfc_int_suspend: nfc_int_suspend { - /* sleep state */ - mux { - /* GPIO 9: NFC Read Interrupt */ - pins = "gpio9"; - function = "gpio"; - }; - - config { - pins = "gpio9"; - drive-strength = <2>; /* 2 MA */ - bias-disable; - }; - }; - - nfc_enable_active: nfc_enable_active { - mux { - /* 48: Enable, 8: Firmware*/ - pins = "gpio48"; - function = "gpio"; - }; - - config { - pins = "gpio48"; - drive-strength = <2>; /* 2 MA */ - bias-disable; - }; - }; - - nfc_enable_suspend: nfc_enable_suspend { - mux { - /* 48: Enable, 8: Firmware */ - pins = "gpio48"; - function = "gpio"; - }; - - config { - pins = "gpio48"; - drive-strength = <2>; /* 2 MA */ - bias-disable; - }; - }; - - - nfc_clk_req_active: nfc_clk_req_active { - /* active state */ - mux { - /* GPIO 7: NFC CLK Req*/ - pins = "gpio7"; - function = "gpio"; - }; - - config { - pins = "gpio7"; - drive-strength = <2>; /* 2 MA */ - bias-disable; - input-enable; - }; - }; - - nfc_clk_req_suspend: nfc_clk_req_suspend { - /* sleep state */ - mux { - /* GPIO 7: NFC CLK Req */ - pins = "gpi7"; - function = "gpio"; - }; - - config { - pins = "gpio7"; - drive-strength = <2>; /* 2 MA */ - bias-disable; - input-enable; - }; - }; - }; -}; - &pmk8350_vadc { pmk8350_qtm_n_therm { reg = ; @@ -239,30 +142,6 @@ }; }; -&qupv3_se7_i2c { - status = "ok"; - #address-cells = <1>; - #size-cells = <0>; - nq@28 { - compatible = "qcom,sn-nci"; - reg = <0x28>; - qcom,sn-irq = <&tlmm 9 0x00>; - qcom,sn-ven = <&tlmm 48 0x00>; - qcom,sn-firm = <&tlmm 8 0x00>; - qcom,sn-clkreq = <&tlmm 7 0x00>; - qcom,sn-vdd-1p8-supply = <&L9A>; - qcom,sn-vdd-1p8-voltage = <1800000 1800000>; - qcom,sn-vdd-1p8-current = <157000>; - interrupt-parent = <&tlmm>; - interrupts = <9 0>; - interrupt-names = "nfc_irq"; - pinctrl-names = "nfc_active", "nfc_suspend"; - pinctrl-0 = <&nfc_int_active &nfc_enable_active>; - pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>; - }; -}; - - &pm8008_8 { status = "disabled";