diff --git a/fw/wmi_tlv_defs.h b/fw/wmi_tlv_defs.h
index 9aa58fc5af13..01d9a549787d 100644
--- a/fw/wmi_tlv_defs.h
+++ b/fw/wmi_tlv_defs.h
@@ -1614,6 +1614,8 @@ typedef enum {
     WMITLV_TAG_STRUC_wmi_iface_ipi_stats,
     WMITLV_TAG_STRUC_wmi_peer_uhr_npca_op_params,
     WMITLV_TAG_STRUC_wmi_ndp_channel_info_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_uhr_omp_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_uhr_omp_npca_params,
 } WMITLV_TAG_ID;
 /*
  * IMPORTANT: Please add _ALL_ WMI Commands Here.
@@ -2218,6 +2220,7 @@ typedef enum {
     OP(WMI_TWT_ADD_CH_USAGE_CMDID) \
     OP(WMI_COEX_GET_POLICY_STATS_CMDID) \
     OP(WMI_PDEV_SET_CUMAC_CHIP_CMDID) \
+    OP(WMI_PEER_UHR_OMP_CMDID) \
     /* add new CMD_LIST elements above this line */
 
 
@@ -2995,8 +2998,9 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_WMM_PARAMS_CMDID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_partner_link_params, partner_link_params, WMITLV_SIZE_VAR) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_channel, dbw_chan, WMITLV_SIZE_VAR) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dbw_chan_info, dbw_chan_info, WMITLV_SIZE_VAR) \
-   WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_vdev_start_smd_params, smd_params,  WMITLV_SIZE_VAR) \
-   WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_vdev_start_uhr_config, uhr_config,  WMITLV_SIZE_VAR)
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_vdev_start_smd_params, smd_params,  WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_vdev_start_uhr_config, uhr_config,  WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_uhr_ap_npca_params, npca_params, WMITLV_SIZE_VAR)
 /* NOTE:
  * Any new TLV addition in WMI_VDEV_START_REQUEST_CMDID needs to be included as
  * TLV in WMI_VDEV_UNIFIED_CONNECT_CMDID as well to maintain compatibility.
@@ -3186,6 +3190,11 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PEER_ASSOC_CMDID);
  */
 WMITLV_CREATE_PARAM_STRUC(WMI_PEER_ASSOC_V2_CMDID);
 
+#define WMITLV_TABLE_WMI_PEER_UHR_OMP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_uhr_omp_cmd_fixed_param, wmi_peer_uhr_omp_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_peer_uhr_omp_npca_params, peer_omp_npca_params, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_UHR_OMP_CMDID);
+
 /* Peer Set Rate Report Condition Cmd */
 #define WMITLV_TABLE_WMI_PEER_SET_RATE_REPORT_CONDITION_CMDID(id,op,buf,len) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_set_rate_report_condition_fixed_param, wmi_peer_set_rate_report_condition_fixed_param, fixed_param, WMITLV_SIZE_FIX)
@@ -5282,7 +5291,8 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_MESH_RX_FILTER_ENABLE_CMDID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, preferred_tx_stream_list, WMITLV_SIZE_VAR) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, preferred_rx_stream_list, WMITLV_SIZE_VAR) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_channel, dbw_chan, WMITLV_SIZE_VAR) \
-    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dbw_chan_info, dbw_chan_info, WMITLV_SIZE_VAR)
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dbw_chan_info, dbw_chan_info, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_uhr_ap_npca_params, npca_params, WMITLV_SIZE_VAR)
 WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_MULTIPLE_VDEV_RESTART_REQUEST_CMDID);
 
 #define WMITLV_TABLE_WMI_PDEV_UPDATE_PKT_ROUTING_CMDID(id,op,buf,len) \
diff --git a/fw/wmi_unified.h b/fw/wmi_unified.h
index dc3f726a5881..411889d45b35 100644
--- a/fw/wmi_unified.h
+++ b/fw/wmi_unified.h
@@ -919,7 +919,11 @@ typedef enum {
     /* WMI_PEER_ASSOC_V2_CMDID: extended alternative for WMI_PEER_ASSOC_CMDID */
     WMI_PEER_ASSOC_V2_CMDID,
 
-    /* beacon/management specific commands */
+    /* WMI_PEER_UHR_OMP_CMDID for UHR OMP frame*/
+    WMI_PEER_UHR_OMP_CMDID,
+
+
+    /*--- beacon/management specific commands ---*/
 
     /** transmit beacon by reference . used for transmitting beacon on low latency interface like pcie */
     WMI_BCN_TX_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_MGMT),
@@ -19223,6 +19227,8 @@ typedef struct {
  *         optional TLV used for SMD
  *     wmi_vdev_start_uhr_config uhr_config_info
  *         optional TLV used if VAP is 11BN
+ *     wmi_uhr_ap_npca_params npca_params
+ *         optional TLV used to update NPCA information
  */
 } wmi_vdev_start_request_cmd_fixed_param;
 
@@ -23753,6 +23759,67 @@ typedef struct {
     A_UINT32 npca_op_param1;
 } wmi_peer_uhr_npca_op_params;
 
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_uhr_omp_cmd_fixed_param */
+    A_UINT32 sw_peer_id;
+    A_UINT32 pdev_id;
+
+    /*
+     * Variable-length TLV arrays follow this fixed param:
+     *   wmi_peer_uhr_omp_npca_params peer_omp_npca_params[];
+     *   Place Holder for other TLVs
+     */
+} wmi_peer_uhr_omp_cmd_fixed_param;
+
+typedef struct{
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_uhr_omp_npca_params */
+    /*
+     * Bit0:3:  NPCA hw_link_id
+     *          WMI_OMP_NPCA_HW_LINK_ID_GET /  _SET
+     * Bit4:    Enable/Disable  NPCA params
+     *          WMI_OMP_NPCA_ENABLE_GET / _SET
+     * Bit5:    Update NPCA params
+     *          WMI_OMP_NPCA_UPDATE_GET / _SET
+     * Bit6:31: Reserved
+    */
+    A_UINT32 omp_npca_caps;
+    /*
+     * Bit0:5:   NPCA Switch Delay
+     *           The time needed by an NPCA STA to switch from the
+     *           BSS primary channel to the NPCA primary channel,
+     *           in units of 4 us.
+     *           WMI_OMP_NPCA_SWITCH_DELAY_GET / _SET
+     *
+     * Bit6:11: NPCA Switch Back Delay
+     *           The time needed by an NPCA STA to switch from the
+     *           NPCA primary channel to the BSS primary channel,
+     *           in units of 4
+     *           WMI_OMP_NPCA_SWITCH_BACK_DELAY_GET / _SET
+     *
+     * Bit12:31: Reserved
+     */
+    A_UINT32 omp_npca_param;
+} wmi_peer_uhr_omp_npca_params;
+
+#define WMI_OMP_NPCA_HW_LINK_ID_GET(_var)       WMI_GET_BITS(_var, 0, 4)
+#define WMI_OMP_NPCA_HW_LINK_ID_SET(_var, _val) WMI_SET_BITS(_var, 0, 4, _val)
+
+#define WMI_OMP_NPCA_ENABLE_GET(_var)           WMI_GET_BITS(_var, 4, 1)
+#define WMI_OMP_NPCA_ENABLE_SET(_var, _val)     WMI_SET_BITS(_var, 4, 1, _val)
+
+#define WMI_OMP_NPCA_UPDATE_GET(_var)           WMI_GET_BITS(_var, 5, 1)
+#define WMI_OMP_NPCA_UPDATE_SET(_var, _val)     WMI_SET_BITS(_var, 5, 1, _val)
+
+#define WMI_OMP_NPCA_SWITCH_DELAY_GET(_var) \
+    WMI_GET_BITS(_var, 0, 6)
+#define WMI_OMP_NPCA_SWITCH_DELAY_SET(_var, _val) \
+    WMI_SET_BITS(_var, 0, 6, _val)
+
+#define WMI_OMP_NPCA_SWITCH_BACK_DELAY_GET(_var) \
+    WMI_GET_BITS(_var, 6, 6)
+#define WMI_OMP_NPCA_SWITCH_BACK_DELAY_SET(_var, _val) \
+    WMI_SET_BITS(_var, 6, 6, _val)
+
 typedef struct {
     A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_get_ap_oper_bw_cmd_fixed_param */
     A_UINT32 vdev_id;
@@ -42432,6 +42499,7 @@ static INLINE A_UINT8 *wmi_id_to_name(A_UINT32 wmi_command)
         WMI_RETURN_STRING(WMI_ENERGY_MGMT_OEM_DATA_CMDID);
         WMI_RETURN_STRING(WMI_TWT_ADD_CH_USAGE_CMDID);
         WMI_RETURN_STRING(WMI_COEX_GET_POLICY_STATS_CMDID);
+        WMI_RETURN_STRING(WMI_PEER_UHR_OMP_CMDID);
     }
 
     return (A_UINT8 *) "Invalid WMI cmd";
@@ -43609,6 +43677,8 @@ typedef struct {
      *     optional TLV for dbw_chan
      * wmi_dbw_chan_info dbw_chan_info
      *     optional TLV used for dbw_chan_info
+     * wmi_uhr_ap_npca_params npca_params
+     *      optional TLV used to update NPCA information
      */
 } wmi_pdev_multiple_vdev_restart_request_cmd_fixed_param;
 
@@ -55102,13 +55172,13 @@ typedef struct {
      *           The time needed by an NPCA STA to switch from the
      *           BSS primary channel to the NPCA primary channel,
      *           in units of 4 us.
-     *           WMI_NPCA_AP_CAP_SWT_DELAY_GET / _SET
+     *           WMI_NPCA_AP_CAP_SWITCH_DELAY_GET / _SET
      *
      * Bit18:23: NPCA Switch Back Delay
      *           The time needed by an NPCA STA to switch from the
      *           NPCA primary channel to the BSS primary channel,
      *           in units of 4 us.
-     *           WMI_NPCA_AP_CAP_SWTB_DELAY_GET / _SET
+     *           WMI_NPCA_AP_CAP_SWITCH_BACK_DELAY_GET / _SET
      *
      * Bit24:25: The Initial NPCA QSRC field indicates the value
      *           that is used to initialize the EDCAF QSRC[AC] variables
diff --git a/fw/wmi_version.h b/fw/wmi_version.h
index 93cc9d29d865..1dbf822b9389 100644
--- a/fw/wmi_version.h
+++ b/fw/wmi_version.h
@@ -37,7 +37,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 1741
+#define __WMI_REVISION_ 1742
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work