fw-api: CL 31376775 - update fw common interface files

Change-Id: Ia7305ce1e4812915798d59a0b644464a76009a27
CRs-Fixed: 3830439

fw/wmi_tlv_defs.h

@@ -1561,6 +1561,8 @@ typedef enum {
     WMITLV_TAG_STRUC_wmi_pdev_uhr_cu_cmd_fixed_param,
     WMITLV_TAG_STRUC_wmi_vdev_uhr_cu_status,
     WMITLV_TAG_STRUC_wmi_pdev_uhr_cu_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_cfr_capture_fix_agc_gain_config,
+    WMITLV_TAG_STRUC_wmi_cfr_capture_fix_agc_gain_info,
 } WMITLV_TAG_ID;
 /*
  * IMPORTANT: Please add _ALL_ WMI Commands Here.
@@ -5476,7 +5478,8 @@ WMITLV_CREATE_PARAM_STRUC(WMI_AUDIO_AGGR_GET_SCHED_METHOD_CMDID);
 /* CFR Capture Filter cmd */
 #define WMITLV_TABLE_WMI_CFR_CAPTURE_FILTER_CMDID(id,op,buf,len) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_cfr_capture_filter_cmd_fixed_param, wmi_cfr_capture_filter_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
-    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_cfr_filter_group_config, filter_group_config, WMITLV_SIZE_VAR)
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_cfr_filter_group_config, filter_group_config, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_cfr_capture_fix_agc_gain_config, fix_agc_gain_config, WMITLV_SIZE_VAR)
 WMITLV_CREATE_PARAM_STRUC(WMI_CFR_CAPTURE_FILTER_CMDID);
 
 /* VLAN config */
@@ -8431,7 +8434,8 @@ WMITLV_CREATE_PARAM_STRUC(WMI_WLAN_MODE_RESP_EVENTID);
 
 /* CFR capture filter response event */
 #define WMITLV_TABLE_WMI_CFR_CAPTURE_FILTER_RESP_EVENTID(id,op,buf,len) \
-WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_cfr_capture_filter_resp_event_fixed_param, wmi_cfr_capture_filter_resp_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_cfr_capture_filter_resp_event_fixed_param, wmi_cfr_capture_filter_resp_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_cfr_capture_fix_agc_gain_info, fix_agc_gain_info, WMITLV_SIZE_VAR)
 WMITLV_CREATE_PARAM_STRUC(WMI_CFR_CAPTURE_FILTER_RESP_EVENTID);
 
 

fw/wmi_unified.h

@@ -47591,6 +47591,44 @@ typedef struct {
 #define WMI_CFR_FRAME_SEQ_NUM_SET(frame_seq_ctrl, value) \
         WMI_SET_BITS(frame_seq_ctrl, 4, 12, value)
 
+/**
+ * CFR capture fix agc gain status codes
+ * These values are sent to host in wmi_cfr_capture_filter_resp_event
+ */
+typedef enum {
+    /** Configuration successful */
+    WMI_CFR_CAPTURE_FIX_AGC_GAIN_STATUS_SUCCESS             = 0,
+
+    /** RX AGC Gain index out of range */
+    WMI_CFR_CAPTURE_FIX_AGC_GAIN_REASON_INDEX_OUT_OF_RANGE  = 1,
+
+    /** Fixed AGC not supported in current PHY mode */
+    WMI_CFR_CAPTURE_FIX_AGC_GAIN_REASON_PHYMODE_REJECT      = 2,
+
+    /** Failed to disable Scan */
+    WMI_CFR_CAPTURE_FIX_AGC_GAIN_REASON_SCAN_DISABLE_FAILED = 3,
+
+    /** Failed to disable ANI */
+    WMI_CFR_CAPTURE_FIX_AGC_GAIN_REASON_ANI_DISABLE_FAILED  = 4,
+
+    /** AGC control is already owned by another module */
+    WMI_CFR_CAPTURE_FIX_AGC_GAIN_REASON_AGC_CONFLICT        = 5,
+
+    /** Another CFR/AGC session is in progress */
+    WMI_CFR_CAPTURE_FIX_AGC_GAIN_REASON_SESSION_BUSY        = 6,
+} wmi_cfr_capture_fix_agc_gain_status_t;
+
+typedef struct {
+    /* Info of the CFR capture fix AGC gain configuration based on wmi_cfr_capture_fix_agc_gain_status_t */
+    A_UINT32 tlv_header;
+
+    /* wmi_cfr_capture_fix_agc_gain_status_t */
+    A_UINT32 status;
+
+    /* RX agc gain index for cfr capture in HW */
+    A_UINT32 cfr_agc_gain_index;
+} wmi_cfr_capture_fix_agc_gain_info;
+
 /**
  * CFR capture filter command response status codes
  * These values are sent to host in wmi_cfr_capture_filter_resp_event
@@ -48488,6 +48526,21 @@ typedef struct {
     A_UINT32 data_subtype_filter;
 } wmi_cfr_filter_group_config;
 
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_cfr_fix_agc_gain_config */
+
+    /*
+     * 0 - disable CFR fix agc gain feature
+     * 1 - enable CFR fix agc gain feature
+     */
+    A_UINT32 cfr_fix_agc_gain_enable;
+
+    /* Forced RX agc gain index for cfr capture, which is set by user in host */
+    A_UINT32 force_cfr_agc_gain_index;
+} wmi_cfr_capture_fix_agc_gain_config;
+
+
 #define WMI_CFR_DIRECTED_FTM_ACK_EN_BIT_POS           0
 #define WMI_CFR_ALL_FTM_ACK_EN_BIT_POS                1
 #define WMI_CFR_NDPA_NDP_DIRECTED_EN_BIT_POS          2

fw/wmi_version.h

@@ -37,7 +37,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 1696
+#define __WMI_REVISION_ 1697
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work