A-Team_Digital_Solutions/android_kernel_motorola_sm6375
Watch
2
0
Fork
You've already forked android_kernel_motorola_sm6375
 0
mirror of https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git synced 2026-10-28 18:51:56 -04:00
Code Issues Projects Releases Packages Wiki Activity

Staging driver patches for 4.6-rc1

Browse source 
Here is the big staging driver pull request for 4.6-rc1.
 
 Lots of little things here, over 1600 patches or so.  Notible is all of
 the good Lustre work happening, those developers have finally woken up
 and are cleaning up their code greatly.  The Outreachy intern
 application process is also happening, which brought in another 400 or
 so patches.  Full details are in the very long shortlog.
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <[email protected]>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlbrc3EACgkQMUfUDdst+ylu5ACgpdTKjrZn2vHElW3GRhTpzJdQ
 wz8AoJDeur2DmBkQrKD5/u/WL4UTRNZJ
 =+Q6N
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here is the big staging driver pull request for 4.6-rc1.

  Lots of little things here, over 1600 patches or so.  Notable is all
  of the good Lustre work happening, those developers have finally woken
  up and are cleaning up their code greatly.  The Outreachy intern
  application process is also happening, which brought in another 400 or
  so patches.  Full details are in the very long shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits)
  staging: lustre: fix aligments in lnet selftest
  staging: lustre: report minimum of two buffers for LNet selftest load test
  staging: lustre: test for proper errno code in lstcon_rpc_trans_abort
  staging: lustre: filter remaining extra spacing for lnet selftest
  staging: lustre: remove extra spacing when setting variable for lnet selftest
  staging: lustre: remove extra spacing of variable declartions for lnet selftest
  staging: lustre: fix spacing issues checkpatch reported in lnet selftest
  staging: lustre: remove returns in void function for lnet selftest
  staging: lustre: fix bogus lst errors for lnet selftest
  staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc
  staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc
  staging: android: ion: fix up file mode
  staging: ion: debugfs invalid gfp mask
  staging: rts5208: Replace pci_enable_device with pcim_enable_device
  Staging: ieee80211: Place constant on right side of the test.
  staging: speakup: Replace del_timer with del_timer_sync
  staging: lowmemorykiller: fix 2 checks that checkpatch complained
  staging: mt29f_spinand: Drop void pointer cast
  staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN
  staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED
  ...
This commit is contained in:
Linus Torvalds 2016-03-17 22:13:41 -07:00
commit 9dffdb38d8
895 changed files with 36024 additions and 45222 deletions
Download patch file Download diff file Expand all files Collapse all files

10
Documentation/ABI/testing/sysfs-bus-iio
View file

@ -496,8 +496,11 @@ Description:
1kohm_to_gnd: connected to ground via an 1kOhm resistor,
6kohm_to_gnd: connected to ground via a 6kOhm resistor,
20kohm_to_gnd: connected to ground via a 20kOhm resistor,
90kohm_to_gnd: connected to ground via a 90kOhm resistor,
100kohm_to_gnd: connected to ground via an 100kOhm resistor,
125kohm_to_gnd: connected to ground via an 125kOhm resistor,
500kohm_to_gnd: connected to ground via a 500kOhm resistor,
640kohm_to_gnd: connected to ground via a 640kOhm resistor,
three_state: left floating.
For a list of available output power down options read
outX_powerdown_mode_available. If Y is not present the
@ -1491,3 +1494,10 @@ Description:
This ABI is especially applicable for humidity sensors
to heatup the device and get rid of any condensation
in some humidity environment
What: /sys/bus/iio/devices/iio:deviceX/in_ph_raw
KernelVersion: 4.5
Contact: [email protected]
Description:
Raw (unscaled no offset etc.) pH reading of a substance as a negative
base-10 logarithm of hydrodium ions in a litre of water.

54
Documentation/ABI/testing/sysfs-bus-iio-health-afe440x Normal file
View file

@ -0,0 +1,54 @@
What: /sys/bus/iio/devices/iio:deviceX/tia_resistanceY
/sys/bus/iio/devices/iio:deviceX/tia_capacitanceY
Date: December 2015
KernelVersion:
Contact: Andrew F. Davis <[email protected]>
Description:
Get and set the resistance and the capacitance settings for the
Transimpedance Amplifier. Y is 1 for Rf1 and Cf1, Y is 2 for
Rf2 and Cf2 values.
What: /sys/bus/iio/devices/iio:deviceX/tia_separate_en
Date: December 2015
KernelVersion:
Contact: Andrew F. Davis <[email protected]>
Description:
Enable or disable separate settings for the TransImpedance
Amplifier above, when disabled both values are set by the
first channel.
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_raw
/sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_ambient_raw
Date: December 2015
KernelVersion:
Contact: Andrew F. Davis <[email protected]>
Description:
Get measured values from the ADC for these stages. Y is the
specific LED number. The values are expressed in 24-bit twos
complement.
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY-ledY_ambient_raw
Date: December 2015
KernelVersion:
Contact: Andrew F. Davis <[email protected]>
Description:
Get differential values from the ADC for these stages. Y is the
specific LED number. The values are expressed in 24-bit twos
complement for the specified LEDs.
What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_offset
/sys/bus/iio/devices/iio:deviceX/out_current_ledY_ambient_offset
Date: December 2015
KernelVersion:
Contact: Andrew F. Davis <[email protected]>
Description:
Get and set the offset cancellation DAC setting for these
stages. The values are expressed in 5-bit sign-magnitude.
What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_raw
Date: December 2015
KernelVersion:
Contact: Andrew F. Davis <[email protected]>
Description:
Get and set the LED current for the specified LED. Y is the
specific LED number.

15
Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 Normal file
View file

@ -0,0 +1,15 @@
What: /sys/bus/iio/devices/iio:deviceX/meas_conf
What: /sys/bus/iio/devices/iio:deviceX/meas_conf_available
KernelVersion: 4.5
Contact: [email protected]
Description:
Current configuration and available configurations
for the bias current.
normal - Normal measurement configurations (default)
positivebias - Positive bias configuration
negativebias - Negative bias configuration
disabled - Only available on HMC5983. Disables magnetic
sensor and enables temperature sensor.
Note: The effect of this configuration may vary
according to the device. For exact documentation
check the device's datasheet.

9
Documentation/ABI/testing/sysfs-bus-iio-vf610
View file

@ -5,3 +5,12 @@ Description:
Specifies the hardware conversion mode used. The three
available modes are "normal", "high-speed" and "low-power",
where the last is the default mode.
What: /sys/bus/iio/devices/iio:deviceX/out_conversion_mode
KernelVersion: 4.6
Contact: [email protected]
Description:
Specifies the hardware conversion mode used within DAC.
The two available modes are "high-power" and "low-power",
where "low-power" mode is the default mode.