Merge branch 'pl022' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into spi-next

drivers/spi/Kconfig

@@ -311,7 +311,7 @@ config SPI_S3C24XX_FIQ
 
 config SPI_S3C64XX
 	tristate "Samsung S3C64XX series type SPI"
-	depends on (ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
+	depends on (ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
 	select S3C64XX_DMA if ARCH_S3C64XX
 	help
 	  SPI driver for Samsung S3C64XX and newer SoCs.

drivers/spi/spi-imx.c

@@ -37,6 +37,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
 
 #include <mach/spi.h>
 
@@ -85,7 +86,8 @@ struct spi_imx_data {
 	struct completion xfer_done;
 	void __iomem *base;
 	int irq;
-	struct clk *clk;
+	struct clk *clk_per;
+	struct clk *clk_ipg;
 	unsigned long spi_clk;
 
 	unsigned int count;
@@ -758,6 +760,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 	struct spi_master *master;
 	struct spi_imx_data *spi_imx;
 	struct resource *res;
+	struct pinctrl *pinctrl;
 	int i, ret, num_cs;
 
 	if (!np && !mxc_platform_info) {
@@ -845,15 +848,28 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 		goto out_iounmap;
 	}
 
-	spi_imx->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(spi_imx->clk)) {
-		dev_err(&pdev->dev, "unable to get clock\n");
-		ret = PTR_ERR(spi_imx->clk);
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl)) {
+		ret = PTR_ERR(pinctrl);
 		goto out_free_irq;
 	}
 
-	clk_enable(spi_imx->clk);
-	spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
+	spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(spi_imx->clk_ipg)) {
+		ret = PTR_ERR(spi_imx->clk_ipg);
+		goto out_free_irq;
+	}
+
+	spi_imx->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(spi_imx->clk_per)) {
+		ret = PTR_ERR(spi_imx->clk_per);
+		goto out_free_irq;
+	}
+
+	clk_prepare_enable(spi_imx->clk_per);
+	clk_prepare_enable(spi_imx->clk_ipg);
+
+	spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
 
 	spi_imx->devtype_data->reset(spi_imx);
 
@@ -871,8 +887,8 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 	return ret;
 
 out_clk_put:
-	clk_disable(spi_imx->clk);
-	clk_put(spi_imx->clk);
+	clk_disable_unprepare(spi_imx->clk_per);
+	clk_disable_unprepare(spi_imx->clk_ipg);
 out_free_irq:
 	free_irq(spi_imx->irq, spi_imx);
 out_iounmap:
@@ -900,8 +916,8 @@ static int __devexit spi_imx_remove(struct platform_device *pdev)
 	spi_bitbang_stop(&spi_imx->bitbang);
 
 	writel(0, spi_imx->base + MXC_CSPICTRL);
-	clk_disable(spi_imx->clk);
-	clk_put(spi_imx->clk);
+	clk_disable_unprepare(spi_imx->clk_per);
+	clk_disable_unprepare(spi_imx->clk_ipg);
 	free_irq(spi_imx->irq, spi_imx);
 	iounmap(spi_imx->base);
 

drivers/spi/spi-omap2-mcspi.c

@@ -801,7 +801,7 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 	mcspi_dma = &mcspi->dma_channels[spi->chip_select];
 
 	if (!cs) {
-		cs = devm_kzalloc(&spi->dev , sizeof *cs, GFP_KERNEL);
+		cs = kzalloc(sizeof *cs, GFP_KERNEL);
 		if (!cs)
 			return -ENOMEM;
 		cs->base = mcspi->base + spi->chip_select * 0x14;
@@ -842,6 +842,7 @@ static void omap2_mcspi_cleanup(struct spi_device *spi)
 		cs = spi->controller_state;
 		list_del(&cs->node);
 
+		kfree(cs);
 	}
 
 	if (spi->chip_select < spi->master->num_chipselect) {

drivers/spi/spi-orion.c

@@ -16,8 +16,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/module.h>
+#include <linux/clk.h>
 #include <asm/unaligned.h>
 
 #define DRIVER_NAME			"orion_spi"
@@ -46,6 +46,7 @@ struct orion_spi {
 	unsigned int		max_speed;
 	unsigned int		min_speed;
 	struct orion_spi_info	*spi_info;
+	struct clk              *clk;
 };
 
 static struct workqueue_struct *orion_spi_wq;
@@ -104,7 +105,7 @@ static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
 
 	orion_spi = spi_master_get_devdata(spi->master);
 
-	tclk_hz = orion_spi->spi_info->tclk;
+	tclk_hz = clk_get_rate(orion_spi->clk);
 
 	/*
 	 * the supported rates are: 4,6,8...30
@@ -450,6 +451,7 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 	struct orion_spi *spi;
 	struct resource *r;
 	struct orion_spi_info *spi_info;
+	unsigned long tclk_hz;
 	int status = 0;
 
 	spi_info = pdev->dev.platform_data;
@@ -476,19 +478,28 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 	spi->master = master;
 	spi->spi_info = spi_info;
 
-	spi->max_speed = DIV_ROUND_UP(spi_info->tclk, 4);
-	spi->min_speed = DIV_ROUND_UP(spi_info->tclk, 30);
+	spi->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(spi->clk)) {
+		status = PTR_ERR(spi->clk);
+		goto out;
+	}
+
+	clk_prepare(spi->clk);
+	clk_enable(spi->clk);
+	tclk_hz = clk_get_rate(spi->clk);
+	spi->max_speed = DIV_ROUND_UP(tclk_hz, 4);
+	spi->min_speed = DIV_ROUND_UP(tclk_hz, 30);
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		status = -ENODEV;
-		goto out;
+		goto out_rel_clk;
 	}
 
 	if (!request_mem_region(r->start, resource_size(r),
 				dev_name(&pdev->dev))) {
 		status = -EBUSY;
-		goto out;
+		goto out_rel_clk;
 	}
 	spi->base = ioremap(r->start, SZ_1K);
 
@@ -508,7 +519,9 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 
 out_rel_mem:
 	release_mem_region(r->start, resource_size(r));
-
+out_rel_clk:
+	clk_disable_unprepare(spi->clk);
+	clk_put(spi->clk);
 out:
 	spi_master_put(master);
 	return status;
@@ -526,6 +539,9 @@ static int __exit orion_spi_remove(struct platform_device *pdev)
 
 	cancel_work_sync(&spi->work);
 
+	clk_disable_unprepare(spi->clk);
+	clk_put(spi->clk);
+
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(r->start, resource_size(r));
 

drivers/spi/spi-pl022.c

@@ -489,6 +489,11 @@ static void giveback(struct pl022 *pl022)
 	pl022->cur_transfer = NULL;
 	pl022->cur_chip = NULL;
 	spi_finalize_current_message(pl022->master);
+
+	/* disable the SPI/SSP operation */
+	writew((readw(SSP_CR1(pl022->virtbase)) &
+		(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+
 }
 
 /**
@@ -2048,6 +2053,9 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
 	printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
 	       adev->res.start, pl022->virtbase);
 
+	pm_runtime_enable(dev);
+	pm_runtime_resume(dev);
+
 	pl022->clk = clk_get(&adev->dev, NULL);
 	if (IS_ERR(pl022->clk)) {
 		status = PTR_ERR(pl022->clk);
@@ -2158,6 +2166,7 @@ pl022_remove(struct amba_device *adev)
 	clk_disable(pl022->clk);
 	clk_unprepare(pl022->clk);
 	clk_put(pl022->clk);
+	pm_runtime_disable(&adev->dev);
 	iounmap(pl022->virtbase);
 	amba_release_regions(adev);
 	tasklet_disable(&pl022->pump_transfers);
@@ -2251,15 +2260,6 @@ static struct vendor_data vendor_st_pl023 = {
 	.loopback = false,
 };
 
-static struct vendor_data vendor_db5500_pl023 = {
-	.fifodepth = 32,
-	.max_bpw = 32,
-	.unidir = false,
-	.extended_cr = true,
-	.pl023 = true,
-	.loopback = true,
-};
-
 static struct amba_id pl022_ids[] = {
 	{
 		/*
@@ -2291,11 +2291,6 @@ static struct amba_id pl022_ids[] = {
 		.mask	= 0xffffffff,
 		.data	= &vendor_st_pl023,
 	},
-	{
-		.id	= 0x10080023,
-		.mask	= 0xffffffff,
-		.data	= &vendor_db5500_pl023,
-	},
 	{ 0, 0 },
 };