From 9eb61c78ed968b0a5a7372e02404efc1fac5af11 Mon Sep 17 00:00:00 2001
From: "Vangala, Amarnath" <avangala@qti.qualcomm.com>
Date: Thu, 30 Jul 2020 15:57:19 +0530
Subject: [PATCH] ARM: dts: msm: aatc usb changes for holi

Included fsa handle for aatc support.

Change-Id: I3f0d57878585fc7931b3f3a2a4dffa45f5c9966c
---
 qcom/holi-mtp-usbc-overlay.dts | 37 ++++++++++++++++
 qcom/holi-mtp-usbc.dtsi        | 79 ++++++++++++++++++++++++++++++++--
 2 files changed, 113 insertions(+), 3 deletions(-)

diff --git a/qcom/holi-mtp-usbc-overlay.dts b/qcom/holi-mtp-usbc-overlay.dts
index 4b04d9d69c6e..730400e7c767 100644
--- a/qcom/holi-mtp-usbc-overlay.dts
+++ b/qcom/holi-mtp-usbc-overlay.dts
@@ -9,3 +9,40 @@
 	qcom,msm-id = <454 0x10000>, <472 0x10000>;
 	qcom,board-id = <8 1>;
 };
+
+&swr0 {
+	qcom,is_wcd937x = <0>;
+};
+
+&wcd937x_tx_slave {
+	status = "disabled";
+};
+
+&wcd937x_rx_slave {
+	status = "disabled";
+};
+
+&wcd937x_codec {
+	status = "disabled";
+};
+
+&wcd938x_tx_slave {
+	status = "ok";
+};
+
+&wcd938x_rx_slave {
+	status = "ok";
+};
+
+&wcd938x_codec {
+	status = "ok";
+};
+
+&holi_snd {
+	asoc-codec  = <&stub_codec>, <&bolero>,
+		      <&wcd938x_codec>, <&wsa881x_i2c_e>,
+		      <&wsa881x_i2c_f>;
+	asoc-codec-names = "msm-stub-codec.1", "bolero_codec",
+			   "wcd938x_codec", "wsa-codec0",
+			   "wsa-codec1";
+};
diff --git a/qcom/holi-mtp-usbc.dtsi b/qcom/holi-mtp-usbc.dtsi
index bfb99171157a..d442733e92cd 100644
--- a/qcom/holi-mtp-usbc.dtsi
+++ b/qcom/holi-mtp-usbc.dtsi
@@ -2,6 +2,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include "holi-pmic-overlay.dtsi"
+#include "display/holi-sde-display-mtp.dtsi"
+#include "holi-thermal-overlay.dtsi"
 #include <dt-bindings/iio/qti_power_supply_iio.h>
 
 &sdhc_1 {
@@ -69,10 +71,45 @@
 		status = "ok";
 };
 
+&qupv3_se0_i2c {
+	status = "ok";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	nq@28 {
+		compatible = "qcom,sn-nci";
+		reg = <0x28>;
+		qcom,sn-irq = <&tlmm 9 0x00>;
+		qcom,sn-ven = <&tlmm 6 0x00>;
+		qcom,sn-firm = <&tlmm 8 0x00>;
+		qcom,sn-clkreq = <&tlmm 7 0x00>;
+		qcom,sn-vdd-1p8-supply = <&L11A>;
+		qcom,sn-vdd-1p8-voltage = <1800000 1800000>;
+		qcom,sn-vdd-1p8-current = <157000>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 0>;
+		interrupt-names = "nfc_irq";
+		pinctrl-names = "nfc_active", "nfc_suspend";
+		pinctrl-0 = <&nfc_int_active &nfc_enable_active>;
+		pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>;
+	};
+};
+
 &holi_snd {
 	qcom,msm-mbhc-usbc-audio-supported = <1>;
 	qcom,msm-mbhc-hphl-swh = <0>;
 	qcom,msm-mbhc-gnd-swh = <0>;
+	fsa4480-i2c-handle = <&fsa4480>;
+};
+
+&qupv3_se10_i2c {
+	status = "ok";
+	fsa4480: fsa4480@42 {
+		compatible = "qcom,fsa4480-i2c";
+		reg = <0x42>;
+		io-channels = <&pm7250b_charger PSY_IIO_TYPEC_ACCESSORY_MODE>;
+		io-channel-names = "typec_mode";
+		qcom,use-power-supply = <1>;
+	};
 };
 
 &soc {
@@ -102,6 +139,44 @@
 	};
 };
 
+&pm6150a_amoled {
+	status = "ok";
+};
+
+&qupv3_se8_i2c {
+	status = "okay";
+	qcom,i2c-touch-active="synaptics,tcm-i2c";
+
+	synaptics_tcm@20 {
+		compatible = "synaptics,tcm-i2c";
+		reg = <0x20>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 0x2008>;
+		pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
+					"pmx_ts_release";
+		pinctrl-0 = <&ts_active>;
+		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
+		pinctrl-2 = <&pmx_ts_release>;
+		vdd-supply = <&L11A>;
+		avdd-supply = <&L6A>;
+		synaptics,pwr-reg-name = "avdd";
+		synaptics,bus-reg-name = "vdd";
+		synaptics,irq-gpio = <&tlmm 22 0x2008>;
+		synaptics,irq-on-state = <0>;
+		synaptics,reset-gpio = <&tlmm 21 0x00>;
+		synaptics,reset-on-state = <0>;
+		synaptics,reset-active-ms = <20>;
+		synaptics,reset-delay-ms = <200>;
+		synaptics,power-delay-ms = <200>;
+		synaptics,ubl-i2c-addr = <0x20>;
+		synaptics,extend_report;
+		synaptics,firmware-name = "synaptics_firmware.img";
+
+		panel = <&dsi_rm69299_visionox_amoled_video
+			&dsi_rm69299_visionox_amoled_cmd>;
+	};
+};
+
 &pm7250b_charger {
 	status = "ok";
 	#io-channel-cells = <1>;
@@ -196,9 +271,7 @@
 	qcom,use-cp-iin-sns;
 };
 
-&pm6150a_amoled {
-	status = "ok";
-};
+#include "camera/holi-camera-sensor-mtp.dtsi"
 
 &pm7250b_charger {
 	dpdm-supply = <&qusb_phy0>;