fw-api: CL 7881508 - update fw common interface files

Change-Id: If3ba1ca92240429f2d96e661c096dd3f8e3745c9
WMI: fix incorrect TLV addition in PEER_CFR_CAPTURE_CMD msg
CRs-Fixed: 2262693
This commit is contained in:
spuligil 2019-08-16 18:00:45 -07:00
commit a0ec60b399
3 changed files with 24 additions and 4 deletions

View file

@ -4014,8 +4014,23 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_OBSS_PD_SPATIAL_REUSE_CMDID);
/* Peer CFR capture cmd */
#define WMITLV_TABLE_WMI_PEER_CFR_CAPTURE_CMDID(id,op,buf,len) \
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_cfr_capture_cmd_fixed_param, wmi_peer_cfr_capture_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_cfr_capture_event_phase_fixed_param, wmi_peer_cfr_capture_event_phase_fixed_param, phase_param, WMITLV_SIZE_FIX)
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_cfr_capture_cmd_fixed_param, wmi_peer_cfr_capture_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
/*
* NOTE: from approximately 7/25/19 to 8/16/19, the below TLV was incorrectly
* added to this WMI_PEER_CFR_CAPTURE_CMDID message.
* Any targets compiled with these versions of the WMI definitions will
* expect that if there is a 2nd TLV in the WMI_PEER_CFR_CAPTURE_CMDID,
* it will be
* WMITLV_TAG_STRUC_wmi_peer_cfr_capture_event_phase_fixed_param
* If in the future a new 2nd TLV is added to this WMI_PEER_CFR_CAPTURE_CMDID
* message, that would cause a target compiled with the erroneous old
* definitions to reject the WMI_PEER_CFR_CAPTURE_CMDID message containing
* the new 2nd TLV, because it would not match the
* WMITLV_TAG_STRUC_wmi_peer_cfr_capture_event_phase_fixed_param
* tag expected by the old target.
*
* WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_cfr_capture_event_phase_fixed_param, wmi_peer_cfr_capture_event_phase_fixed_param, phase_param, WMITLV_SIZE_FIX)
*/
WMITLV_CREATE_PARAM_STRUC(WMI_PEER_CFR_CAPTURE_CMDID);
/* CHANNEL WIDTH SWITCH commands for peers. */
@ -5486,7 +5501,8 @@ WMITLV_CREATE_PARAM_STRUC(WMI_ESP_ESTIMATE_EVENTID);
/* Peer CFR capture event */
#define WMITLV_TABLE_WMI_PEER_CFR_CAPTURE_EVENTID(id,op,buf,len) \
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_cfr_capture_event_fixed_param, wmi_peer_cfr_capture_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_cfr_capture_event_fixed_param, wmi_peer_cfr_capture_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_cfr_capture_event_phase_fixed_param, wmi_peer_cfr_capture_event_phase_fixed_param, phase_param, WMITLV_SIZE_FIX)
WMITLV_CREATE_PARAM_STRUC(WMI_PEER_CFR_CAPTURE_EVENTID);
#define WMITLV_TABLE_WMI_PDEV_COLD_BOOT_CAL_DATA_EVENTID(id,op,buf,len) \

View file

@ -27345,6 +27345,10 @@ typedef struct {
#define WMI_PEER_CFR_CAPTURE_EVT_STATUS_OK 0x80000000
#define WMI_PEER_CFR_CAPTURE_EVT_STATUS_OK_S 31
/* Failed to capture CFR as peer is in power save mode */
#define WMI_PEER_CFR_CAPTURE_EVT_STATUS_PS_FAILED 0x40000000
#define WMI_PEER_CFR_CAPTURE_EVT_STATUS_PS_FAILED_S 30
#define WMI_PEER_CFR_CAPTURE_EVT_STATUS_TX 0x00000003
#define WMI_PEER_CFR_CAPTURE_EVT_STATUS_TX_S 0

View file

@ -36,7 +36,7 @@
#define __WMI_VER_MINOR_ 0
/** WMI revision number has to be incremented when there is a
* change that may or may not break compatibility. */
#define __WMI_REVISION_ 710
#define __WMI_REVISION_ 711
/** The Version Namespace should not be normally changed. Only
* host and firmware of the same WMI namespace will work