Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: psmouse - small formatting changes to better follow coding style
  Input: synaptics - set dimensions as reported by firmware
  Input: elantech - relax signature checks
  Input: elantech - enforce common prefix on messages
  Input: wistron_btns - switch to using kmemdup()
  Input: usbtouchscreen - switch to using kmemdup()
  Input: do not force selecting i8042 on Moorestown
  Input: Documentation/sysrq.txt - update KEY_SYSRQ info
  Input: 88pm860x_onkey - remove invalid irq number assignment
  Input: i8042 - add a PNP entry to the aux device list
  Input: i8042 - add some extra PNP keyboard types
  Input: wm9712 - fix wm97xx_set_gpio() logic
  Input: add keypad driver for keys interfaced to TCA6416
  Input: remove obsolete {corgi,spitz,tosa}kbd.c
  Input: kbtab - do not advertise unsupported events
  Input: kbtab - simplify kbtab_disconnect()
  Input: kbtab - fix incorrect size parameter in usb_buffer_free
  Input: acecad - don't advertise mouse events
  Input: acecad - fix some formatting issues
  Input: acecad - simplify usb_acecad_disconnect()
  ...

Trivial conflict in Documentation/feature-removal-schedule.txt

include/linux/input.h

@@ -806,6 +806,7 @@ struct input_absinfo {
 #define BUS_HOST		0x19
 #define BUS_GSC			0x1A
 #define BUS_ATARI		0x1B
+#define BUS_SPI			0x1C
 
 /*
  * MT_TOOL types

include/linux/input/ad714x.h

@@ -0,0 +1,63 @@
+/*
+ * include/linux/input/ad714x.h
+ *
+ * AD714x is very flexible, it can be used as buttons, scrollwheel,
+ * slider, touchpad at the same time. That depends on the boards.
+ * The platform_data for the device's "struct device" holds this
+ * information.
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_INPUT_AD714X_H__
+#define __LINUX_INPUT_AD714X_H__
+
+#define STAGE_NUM              12
+#define STAGE_CFGREG_NUM       8
+#define SYS_CFGREG_NUM         8
+
+/* board information which need be initialized in arch/mach... */
+struct ad714x_slider_plat {
+	int start_stage;
+	int end_stage;
+	int max_coord;
+};
+
+struct ad714x_wheel_plat {
+	int start_stage;
+	int end_stage;
+	int max_coord;
+};
+
+struct ad714x_touchpad_plat {
+	int x_start_stage;
+	int x_end_stage;
+	int x_max_coord;
+
+	int y_start_stage;
+	int y_end_stage;
+	int y_max_coord;
+};
+
+struct ad714x_button_plat {
+	int keycode;
+	unsigned short l_mask;
+	unsigned short h_mask;
+};
+
+struct ad714x_platform_data {
+	int slider_num;
+	int wheel_num;
+	int touchpad_num;
+	int button_num;
+	struct ad714x_slider_plat *slider;
+	struct ad714x_wheel_plat *wheel;
+	struct ad714x_touchpad_plat *touchpad;
+	struct ad714x_button_plat *button;
+	unsigned short stage_cfg_reg[STAGE_NUM][STAGE_CFGREG_NUM];
+	unsigned short sys_cfg_reg[SYS_CFGREG_NUM];
+};
+
+#endif

include/linux/serio.h

@@ -196,5 +196,6 @@ static inline void serio_continue_rx(struct serio *serio)
 #define SERIO_TOUCHIT213	0x38
 #define SERIO_W8001	0x39
 #define SERIO_DYNAPRO	0x3a
+#define SERIO_HAMPSHIRE	0x3b
 
 #endif

include/linux/sysrq.h

@@ -39,40 +39,33 @@ struct sysrq_key_op {
 
 #ifdef CONFIG_MAGIC_SYSRQ
 
-extern int sysrq_on(void);
-
-/*
- * Do not use this one directly:
- */
-extern int __sysrq_enabled;
-
 /* Generic SysRq interface -- you may call it from any device driver, supplying
  * ASCII code of the key, pointer to registers and kbd/tty structs (if they
  * are available -- else NULL's).
  */
 
 void handle_sysrq(int key, struct tty_struct *tty);
-void __handle_sysrq(int key, struct tty_struct *tty, int check_mask);
 int register_sysrq_key(int key, struct sysrq_key_op *op);
 int unregister_sysrq_key(int key, struct sysrq_key_op *op);
 struct sysrq_key_op *__sysrq_get_key_op(int key);
 
+int sysrq_toggle_support(int enable_mask);
+
 #else
 
-static inline int sysrq_on(void)
-{
-	return 0;
-}
-static inline int __reterr(void)
-{
-	return -EINVAL;
-}
 static inline void handle_sysrq(int key, struct tty_struct *tty)
 {
 }
 
-#define register_sysrq_key(ig,nore) __reterr()
-#define unregister_sysrq_key(ig,nore) __reterr()
+static inline int register_sysrq_key(int key, struct sysrq_key_op *op)
+{
+	return -EINVAL;
+}
+
+static inline int unregister_sysrq_key(int key, struct sysrq_key_op *op)
+{
+	return -EINVAL;
+}
 
 #endif
 

include/linux/tca6416_keypad.h

@@ -0,0 +1,34 @@
+/*
+ * tca6416 keypad platform support
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author: Sriramakrishnan <srk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _TCA6416_KEYS_H
+#define _TCA6416_KEYS_H
+
+#include <linux/types.h>
+
+struct tca6416_button {
+	/* Configuration parameters */
+	int code;		/* input event code (KEY_*, SW_*) */
+	int active_low;
+	int type;		/* input event type (EV_KEY, EV_SW) */
+};
+
+struct tca6416_keys_platform_data {
+	struct tca6416_button *buttons;
+	int nbuttons;
+	unsigned int rep:1;	/* enable input subsystem auto repeat */
+	uint16_t pinmask;
+	uint16_t invert;
+	int irq_is_gpio;
+	int use_polling;	/* use polling if Interrupt is not connected*/
+};
+#endif