From a2af540defdcb206721ade157eab4f652bff6120 Mon Sep 17 00:00:00 2001 From: Archit Saxena Date: Wed, 9 Sep 2020 13:18:47 +0530 Subject: [PATCH] ARM: dts: msm: Add scuba-iot files on 5.4 Add initial scuba iot device tree files for kernel 5.4. Change-Id: Ic891ffc3cd2608571082aa473770b4067f3934c3 --- bindings/arm/msm/msm.txt | 4 + bindings/pinctrl/qcom,scuba-pinctrl.yaml | 195 ++++ qcom/Makefile | 6 + qcom/msm-arm-smmu-scuba.dtsi | 198 ++++ qcom/pm2250-rpm-regulator.dtsi | 439 +++++++++ qcom/pm2250.dtsi | 380 ++++++++ qcom/scuba-ion.dtsi | 35 + qcom/scuba-iot-idp-overlay.dts | 12 + qcom/scuba-iot-idp.dtsi | 40 + qcom/scuba-iot-pinctrl.dtsi | 1096 ++++++++++++++++++++++ qcom/scuba-iot.dts | 9 + qcom/scuba-iot.dtsi | 707 ++++++++++++++ qcom/scuba-regulator.dtsi | 348 +++++++ 13 files changed, 3469 insertions(+) create mode 100644 bindings/pinctrl/qcom,scuba-pinctrl.yaml create mode 100644 qcom/msm-arm-smmu-scuba.dtsi create mode 100644 qcom/pm2250-rpm-regulator.dtsi create mode 100644 qcom/pm2250.dtsi create mode 100644 qcom/scuba-ion.dtsi create mode 100644 qcom/scuba-iot-idp-overlay.dts create mode 100644 qcom/scuba-iot-idp.dtsi create mode 100644 qcom/scuba-iot-pinctrl.dtsi create mode 100644 qcom/scuba-iot.dts create mode 100644 qcom/scuba-iot.dtsi create mode 100644 qcom/scuba-regulator.dtsi diff --git a/bindings/arm/msm/msm.txt b/bindings/arm/msm/msm.txt index 16b9fbede6b4..be6b315b994e 100644 --- a/bindings/arm/msm/msm.txt +++ b/bindings/arm/msm/msm.txt @@ -83,6 +83,9 @@ SoCs: - SDXLEMUR compatible = "qcom,sdxlemur" +- SCUBA + compatible = "qcom,scuba-iot" + - SDMMAGPIE compatible = "qcom,sdmmagpie" @@ -244,3 +247,4 @@ compatible = "qcom,holi-mtp" compatible = "qcom,holi-cdp" compatible = "qcom,holi-qrd" compatible = "qcom,holi-atp" +compatible = "qcom,scuba-idp" diff --git a/bindings/pinctrl/qcom,scuba-pinctrl.yaml b/bindings/pinctrl/qcom,scuba-pinctrl.yaml new file mode 100644 index 000000000000..803943900173 --- /dev/null +++ b/bindings/pinctrl/qcom,scuba-pinctrl.yaml @@ -0,0 +1,195 @@ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/pinctrl/qcom,scuba-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SCUBA TLMM block + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + SCUBA platform. + +properties: + compatible: + Usage: required + Value type: + Definition: must be "qcom,scuba-pinctrl" + + reg: + Usage: required + Value type: + Definition: the base address and size of the TLMM register space. + + interrupts: + Usage: required + Value type: + Definition: should specify the TLMM summary IRQ. + + interrupt-controller: + Usage: required + Value type: + Definition: identifies this node as an interrupt controller + + #interrupt-cells: + Usage: required + Value type: + Definition: must be 2. Specifying the pin number and flags, as defined + in + + gpio-controller: + Usage: required + Value type: + Definition: identifies this node as a gpio controller + + #gpio-cells: + Usage: required + Value type: + Definition: must be 2. Specifying the pin number and flags, as defined + in + + wakeup-parent: + Usage: optional + Value type: + Definition: A phandle to the wakeup interrupt controller for the SoC. + + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for + a general description of GPIO and interrupt bindings. + + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of the + phrase "pin configuration node". + + The pin configuration nodes act as a container for an arbitrary number of + subnodes. Each of these subnodes represents some desired configuration for a + pin, a group, or a list of pins or groups. This configuration can include the + mux function to select on those pin(s)/group(s), and various pin configuration + parameters, such as pull-up, drive strength, etc. + + + PIN CONFIGURATION NODES: + + The name of each subnode is not important; all subnodes should be enumerated + and processed purely based on their content. + + Each subnode only affects those parameters that are explicitly listed. In + other words, a subnode that lists a mux function but no pin configuration + parameters implies no information about any pin configuration parameters. + Similarly, a pin subnode that describes a pullup parameter implies no + information about e.g. the mux function. + + + The following generic properties as defined in pinctrl-bindings.txt are valid + to specify in a pin configuration subnode: + + pins: + Usage: required + Value type: + Definition: List of gpio pins affected by the properties specified in + this subnode. + + Valid pins: + gpio0-gpio155 + Supports mux, bias and drive-strength + + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, + sdc2_data sdc1_rclk + Supports bias and drive-strength + + function: + Usage: required + Value type: + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values: + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, + cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, + pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, + qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, + blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, + sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, + uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, + blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, + cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, + blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, + qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, + sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, + blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, + pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, + qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, + gpio + + bias-disable: + Usage: optional + Value type: + Definition: The specified pins should be configured as no pull. + + bias-pull-down: + Usage: optional + Value type: + Definition: The specified pins should be configured as pull down. + + bias-pull-up: + Usage: optional + Value type: + Definition: The specified pins should be configured as pull up. + + output-high: + Usage: optional + Value type: + Definition: The specified pins are configured in output mode, driven high. + Not valid for sdc pins. + + output-low: + Usage: optional + Value type: + Definition: The specified pins are configured in output mode, driven low. + Not valid for sdc pins. + + drive-strength: + Usage: optional + Value type: + Definition: Selects the drive strength for the specified pins, in mA. + Valid values: 2, 4, 6, 8, 10, 12, 14 and 16 + +examples: + - | + tlmm: pinctrl@400000 { + compatible = "qcom,scuba-pinctrl"; + reg = <0x400000 0x800000>; + interrupts = <0 227 0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/qcom/Makefile b/qcom/Makefile index 4ff651cd60c3..212ca73f81f0 100644 --- a/qcom/Makefile +++ b/qcom/Makefile @@ -75,6 +75,12 @@ dtb-$(CONFIG_ARCH_LAHAINA) += lahaina-rumi.dtb \ lahaina-mtp-v2.1.dtb endif +ifeq ($(CONFIG_BUILD_ARM64_DT_OVERLAY),y) +dtbo-$(CONFIG_ARCH_SCUBA) += scuba-iot-idp-overlay.dtbo + +scuba-iot-idp-overlay.dtbo-base := scuba-iot.dtb +endif + ifeq ($(CONFIG_BUILD_ARM64_DT_OVERLAY),y) dtbo-$(CONFIG_ARCH_HOLI) += holi-rumi-overlay.dtbo \ holi-mtp-overlay.dtbo \ diff --git a/qcom/msm-arm-smmu-scuba.dtsi b/qcom/msm-arm-smmu-scuba.dtsi new file mode 100644 index 000000000000..2876f6370a71 --- /dev/null +++ b/qcom/msm-arm-smmu-scuba.dtsi @@ -0,0 +1,198 @@ +#include + +&soc { + kgsl_smmu: kgsl-smmu@0x59a0000 { + status = "disabled"; + compatible = "qcom,qsmmu-v500"; + reg = <0x59a0000 0x10000>, + <0x59c2000 0x20>; + reg-names = "base", "tcu-base"; + #iommu-cells = <2>; + qcom,skip-init; + qcom,no-dynamic-asid; + qcom,use-3-lvl-tables; + #global-interrupts = <1>; + qcom,regulator-names = "vdd"; + #size-cells = <1>; + ranges; + interrupts = , + , + , + , + , + , + , + , + ; + + qcom,actlr = + /* ALL CBs of GFX: +15 deep PF */ + <0x0 0x3ff 0x30B>; + + gfx_0_tbu: gfx_0_tbu@0x59c5000 { + compatible = "qcom,qsmmuv500-tbu"; + reg = <0x59c5000 0x1000>, + <0x59c2200 0x8>; + reg-names = "base", "status-reg"; + qcom,stream-id-range = <0x0 0x400>; + interrupts = ; + }; + }; + + apps_smmu: apps-smmu@0xc600000 { + status = "disabled"; + compatible = "qcom,qsmmu-v500"; + reg = <0xc600000 0x80000>, + <0xc782000 0x20>; + reg-names = "base", "tcu-base"; + #iommu-cells = <2>; + qcom,skip-init; + qcom,use-3-lvl-tables; + #global-interrupts = <1>; + #size-cells = <1>; + #address-cells = <1>; + ranges; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + qcom,msm-bus,name = "apps_smmu"; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,active-only; + qcom,msm-bus,num-paths = <1>; + + qcom,actlr = + /* For rt TBU +3 deep PF */ + <0x400 0x3ff 0x103>, + /* For nrt TBU +3 deep PF */ + <0x800 0x3ff 0x103>; + + anoc_1_tbu: anoc_1_tbu@0xc785000 { + compatible = "qcom,qsmmuv500-tbu"; + reg = <0xc785000 0x1000>, + <0xc782200 0x8>; + reg-names = "base", "status-reg"; + qcom,stream-id-range = <0x0 0x400>; + interrupts = ; + qcom,msm-bus,name = "apps_smmu"; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,active-only; + qcom,msm-bus,num-paths = <2>; + + }; + + mm_rt_tbu: mm_rt_tbu@0xc789000 { + compatible = "qcom,qsmmuv500-tbu"; + reg = <0xc789000 0x1000>, + <0xc782208 0x8>; + reg-names = "base", "status-reg"; + qcom,stream-id-range = <0x400 0x400>; + interrupts = ; + qcom,regulator-names = "vdd"; + qcom,msm-bus,name = "apps_smmu"; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,active-only; + qcom,msm-bus,num-paths = <2>; + + }; + + mm_nrt_tbu: mm_nrt_tbu@0xc78d000 { + compatible = "qcom,qsmmuv500-tbu"; + reg = <0xc78d000 0x1000>, + <0xc782210 0x8>; + reg-names = "base", "status-reg"; + qcom,stream-id-range = <0x800 0x400>; + interrupts = ; + qcom,regulator-names = "vdd"; + qcom,msm-bus,name = "apps_smmu"; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,active-only; + qcom,msm-bus,num-paths = <2>; + + }; + + }; + + kgsl_iommu_test_device { + compatible = "iommu-debug-test"; + qcom,iommu-dma = "disabled"; + iommus = <&kgsl_smmu 0x7 0x0>; + status = "disabled"; + }; + + apps_iommu_test_device { + compatible = "iommu-debug-test"; + qcom,iommu-dma = "disabled"; + iommus = <&apps_smmu 0x1E0 0x0>; + status = "disabled"; + }; + + apps_iommu_coherent_test_device { + compatible = "iommu-debug-test"; + qcom,iommu-dma = "disabled"; + iommus = <&apps_smmu 0x1E1 0x0>; + dma-coherent; + status = "disabled"; + }; +}; diff --git a/qcom/pm2250-rpm-regulator.dtsi b/qcom/pm2250-rpm-regulator.dtsi new file mode 100644 index 000000000000..ed8a655d621f --- /dev/null +++ b/qcom/pm2250-rpm-regulator.dtsi @@ -0,0 +1,439 @@ +&rpm_bus { + rpm-regulator-smpa1 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "smpa"; + qcom,resource-id = <1>; + qcom,regulator-type = <1>; + qcom,hpm-min-load = <100000>; + status = "disabled"; + + regulator-s1 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_s1"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-smpa2 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "smpa"; + qcom,resource-id = <2>; + qcom,regulator-type = <1>; + qcom,hpm-min-load = <100000>; + status = "disabled"; + + regulator-s2 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_s2"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-smpa3 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "smpa"; + qcom,resource-id = <3>; + qcom,regulator-type = <1>; + qcom,hpm-min-load = <100000>; + status = "disabled"; + + regulator-s3 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_s3"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-smpa4 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "smpa"; + qcom,resource-id = <4>; + qcom,regulator-type = <1>; + qcom,hpm-min-load = <100000>; + status = "disabled"; + + regulator-s4 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_s4"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa1 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <1>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l1 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l1"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa2 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <2>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l2 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l2"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa3 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <3>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l3 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l3"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa4 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <4>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l4 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l4"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa5 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <5>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l5 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l5"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa6 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <6>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l6 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l6"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa7 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <7>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l7 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l7"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa8 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <8>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l8 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l8"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa9 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <9>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l9 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l9"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa10 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <10>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l10 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l10"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa11 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <11>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l11 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l11"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa12 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <12>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l12 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l12"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa13 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <13>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l13 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l13"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa14 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <14>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l14 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l14"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa15 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <15>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l15 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l15"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa16 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <16>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l16 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l16"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa17 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <17>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l17 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l17"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa18 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <18>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l18 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l18"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa19 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <19>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l19 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l19"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa20 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <20>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l20 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l20"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa21 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <21>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l21 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l21"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa22 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <22>; + qcom,regulator-type = <0>; + qcom,regulator-hw-type = "pmic5-ldo"; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l22 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l22"; + qcom,set = <3>; + status = "disabled"; + }; + }; +}; diff --git a/qcom/pm2250.dtsi b/qcom/pm2250.dtsi new file mode 100644 index 000000000000..c7125e133d60 --- /dev/null +++ b/qcom/pm2250.dtsi @@ -0,0 +1,380 @@ +#include +#include +#include +#include +#include + +&spmi_bus { + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + + qcom,pm2250@0 { + compatible = "qcom,spmi-pmic"; + reg = <0 SPMI_USID>; + #address-cells = <2>; + #size-cells = <0>; + + pm2250_revid: qcom,revid@100 { + compatible = "qcom,qpnp-revid"; + reg = <0x100 0x100>; + }; + + qcom,power-on@800 { + compatible = "qcom,qpnp-power-on"; + reg = <0x800 0x100>; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "kpdpwr", "resin"; + qcom,pon-dbc-delay = <15625>; + qcom,kpdpwr-sw-debounce; + qcom,system-reset; + qcom,store-hard-reset-reason; + + qcom,pon_1 { + qcom,pon-type = ; + qcom,pull-up = <1>; + linux,code = ; + }; + + qcom,pon_2 { + qcom,pon-type = ; + qcom,pull-up = <1>; + linux,code = ; + }; + }; + + pm2250_tz: qcom,temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm2250_vadc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + qcom,temperature-threshold-set = <1>; + }; + + pm2250_vadc: vadc@3100 { + compatible = "qcom,spmi-adc5-lite"; + reg = <0x3100 0x100>; + reg-names = "adc5-usr-base"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eoc-int-en-set"; + #io-channel-cells = <1>; + io-channel-ranges; + + /* Channel nodes */ + ref_gnd { + reg = ; + label = "ref_gnd"; + qcom,pre-scaling = <1 1>; + }; + + vref_1p25 { + reg = ; + label = "vref_1p25"; + qcom,pre-scaling = <1 1>; + }; + + die_temp { + reg = ; + label = "die_temp"; + qcom,pre-scaling = <1 1>; + }; + + vph_pwr { + reg = ; + label = "vph_pwr"; + qcom,pre-scaling = <1 3>; + }; + + vbat_sns { + reg = ; + label = "vbat_sns"; + qcom,pre-scaling = <1 3>; + }; + + usb_in_v_div_16 { + reg = ; + label = "usb_in_v_div_16"; + qcom,pre-scaling = <1 16>; + }; + + chg_temp { + reg = ; + label = "chg_temp"; + qcom,pre-scaling = <1 1>; + }; + + bat_therm { + reg = ; + label = "bat_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + bat_therm_30k { + reg = ; + label = "bat_therm_30k"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + bat_therm_400k { + reg = ; + label = "bat_therm_400k"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + i_parallel { + reg = ; + label = "i_parallel"; + qcom,pre-scaling = <1 1>; + }; + + bat_id { + reg = ; + label = "bat_id"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + }; + + + pm2250_gpios: pinctrl@c000 { + compatible = "qcom,spmi-gpio"; + reg = <0xc000 0xa00>; + interrupts = <0x0 0xc0 0 IRQ_TYPE_NONE>, + <0x0 0xc1 0 IRQ_TYPE_NONE>, + <0x0 0xc2 0 IRQ_TYPE_NONE>, + <0x0 0xc3 0 IRQ_TYPE_NONE>, + <0x0 0xc4 0 IRQ_TYPE_NONE>, + <0x0 0xc5 0 IRQ_TYPE_NONE>, + <0x0 0xc6 0 IRQ_TYPE_NONE>, + <0x0 0xc7 0 IRQ_TYPE_NONE>, + <0x0 0xc8 0 IRQ_TYPE_NONE>, + <0x0 0xc9 0 IRQ_TYPE_NONE>; + + interrupt-names = "pm2250_gpio1", "pm2250_gpio2", + "pm2250_gpio3", "pm2250_gpio4", + "pm2250_gpio5", "pm2250_gpio6", + "pm2250_gpio7", "pm2250_gpio8", + "pm2250_gpio9", "pm2250_gpio10"; + + gpio-controller; + #gpio-cells = <2>; + }; + + pm2250_rtc: qcom,pm2250_rtc { + compatible = "qcom,pm8941-rtc"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + }; + + pm2250_qg: qpnp,qg { + compatible = "qcom,qpnp-qg-lite"; + #address-cells = <1>; + #size-cells = <1>; + + qcom,vbatt-cutoff-mv = <3400>; + qcom,vbatt-low-mv = <3500>; + qcom,vbatt-low-cold-mv = <3800>; + qcom,vbatt-empty-mv = <3200>; + qcom,vbatt-empty-cold-mv = <3000>; + qcom,s3-entry-fifo-length = <2>; + + qcom,pmic-revid = <&pm2250_revid>; + io-channels = <&pm2250_vadc ADC5_BAT_THERM_100K_PU>, + <&pm2250_vadc ADC5_BAT_ID_100K_PU>; + io-channel-names = "batt-therm", "batt-id"; + + qcom,qgauge@4800 { + status = "okay"; + reg = <0x4800 0x100>; + interrupts = + <0x0 0x48 0x2 IRQ_TYPE_EDGE_RISING>, + <0x0 0x48 0x3 IRQ_TYPE_EDGE_RISING>, + <0x0 0x48 0x5 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "qg-vbat-empty", + "qg-fifo-done", + "qg-good-ocv"; + }; + + qcom,qg-sdam@b600 { + status = "okay"; + reg = <0xb600 0x100>; + }; + }; + + pm2250_charger: qcom,qpnp-smblite { + compatible = "qcom,qpnp-smblite"; + #address-cells = <1>; + #size-cells = <1>; + #cooling-cells = <2>; + + qcom,pmic-revid = <&pm2250_revid>; + qcom,chgr@1000 { + reg = <0x1000 0x100>; + interrupts = + <0x0 0x10 0x1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x10 0x0 IRQ_TYPE_EDGE_RISING>, + <0x0 0x10 0x4 IRQ_TYPE_EDGE_RISING>, + <0x0 0x10 0x7 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "chgr-error", + "chg-state-change", + "buck-oc", + "vph-ov"; + }; + + qcom,dcdc@1100 { + reg = <0x1100 0x100>; + interrupts = + <0x0 0x11 0x0 IRQ_TYPE_EDGE_RISING>, + <0x0 0x11 0x1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x11 0x2 IRQ_TYPE_EDGE_RISING>, + <0x0 0x11 0x6 IRQ_TYPE_EDGE_RISING>, + <0x0 0x11 0x7 IRQ_TYPE_EDGE_BOTH>; + + interrupt-names = "otg-fail", + "otg-fault", + "skip-mode", + "input-current-limiting", + "switcher-power-ok"; + }; + + qcom,batif@1200 { + reg = <0x1200 0x100>; + interrupts = + <0x0 0x12 0x0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0x1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0x3 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0x4 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "bat-temp", + "bat-therm-or-id-missing", + "bat-low", + "bat-ov", + "bsm-active"; + }; + + qcom,usb@1300 { + reg = <0x1300 0x100>; + interrupts = + <0x0 0x13 0x0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 0x1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 0x3 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 0x4 IRQ_TYPE_EDGE_RISING>, + <0x0 0x13 0x6 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "usbin-plugin", + "usbin-collapse", + "usbin-uv", + "usbin-ov", + "usbin-gtvt", + "usbin-icl-change"; + }; + + qcom,typec@1500 { + reg = <0x1500 0x100>; + interrupts = + <0x0 0x15 0x0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x2 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x4 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x5 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x6 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x7 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "typec-or-rid-detect-change", + "typec-vpd-detect", + "typec-cc-state-change", + "typec-vbus-change", + "typec-attach-detach", + "typec-legacy-cable-detect", + "typec-try-snk-src-detect"; + }; + + qcom,misc@1600 { + reg = <0x1600 0x100>; + interrupts = + <0x0 0x16 0x0 IRQ_TYPE_EDGE_RISING>, + <0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x16 0x2 IRQ_TYPE_EDGE_RISING>, + <0x0 0x16 0x3 IRQ_TYPE_EDGE_RISING>, + <0x0 0x16 0x4 IRQ_TYPE_EDGE_RISING>, + <0x0 0x16 0x5 IRQ_TYPE_EDGE_RISING>, + <0x0 0x16 0x6 IRQ_TYPE_EDGE_BOTH>; + + interrupt-names = "wdog-snarl", + "wdog-bark", + "aicl-fail", + "aicl-done", + "imp-trigger", + "all-chnl-cond-done", + "temp-change"; + }; + + qcom,schgm-flashlite@a600 { + reg = <0xa600 0x100>; + interrupts = + <0x0 0xa6 0x2 IRQ_TYPE_EDGE_RISING>, + <0x0 0xa6 0x5 IRQ_TYPE_EDGE_RISING>, + <0x0 0xa6 0x6 IRQ_TYPE_EDGE_RISING>, + <0x0 0xa6 0x7 IRQ_TYPE_EDGE_BOTH>; + + interrupt-names = "flash-state-change", + "ilim1-s1", + "ilim2-s2", + "vreg-ok"; + }; + }; + }; + + pm2250_1: qcom,pm2250@1 { + compatible = "qcom,spmi-pmic"; + reg = <1 SPMI_USID>; + #address-cells = <2>; + #size-cells = <0>; + + pm2250_vib: qcom,vibrator@5600 { + compatible = "qcom,qpnp-vibrator-ldo"; + reg = <0x5600 0x100>; + qcom,vib-ldo-volt-uv = <3000000>; + qcom,disable-overdrive; + }; + + pm2250_pwm1: qcom,pwms@bc00 { + compatible = "qcom,pwm-lpg"; + reg = <0xbc00 0x100>; + reg-names = "lpg-base"; + qcom,num-lpg-channels = <1>; + #pwm-cells = <2>; + }; + + pm2250_pwm2: qcom,pwms@bd00 { + compatible = "qcom,pwm-lpg"; + reg = <0xbd00 0x100>; + reg-names = "lpg-base"; + qcom,num-lpg-channels = <1>; + #pwm-cells = <2>; + }; + + pm2250_pwm3: qcom,pwms@be00 { + compatible = "qcom,pwm-lpg"; + reg = <0xbe00 0x100>; + reg-names = "lpg-base"; + qcom,num-lpg-channels = <1>; + #pwm-cells = <2>; + }; + }; +}; diff --git a/qcom/scuba-ion.dtsi b/qcom/scuba-ion.dtsi new file mode 100644 index 000000000000..cba6f834d9d9 --- /dev/null +++ b/qcom/scuba-ion.dtsi @@ -0,0 +1,35 @@ +&soc { + qcom,ion { + compatible = "qcom,msm-ion"; + #address-cells = <1>; + #size-cells = <0>; + + system_heap: qcom,ion-heap@25 { + reg = <25>; + qcom,ion-heap-type = "SYSTEM"; + }; + + system_secure_heap: qcom,ion-heap@9 { + reg = <9>; + qcom,ion-heap-type = "SYSTEM_SECURE"; + }; + + qcom,ion-heap@10 { /* SECURE DISPLAY HEAP */ + reg = <10>; + memory-region = <&secure_display_memory>; + qcom,ion-heap-type = "HYP_CMA"; + }; + + qcom,ion-heap@27 { /* QSEECOM HEAP */ + reg = <27>; + memory-region = <&qseecom_mem>; + qcom,ion-heap-type = "DMA"; + }; + + qcom,ion-heap@19 { /* QSEECOM HEAP */ + reg = <19>; + memory-region = <&qseecom_ta_mem>; + qcom,ion-heap-type = "DMA"; + }; + }; +}; diff --git a/qcom/scuba-iot-idp-overlay.dts b/qcom/scuba-iot-idp-overlay.dts new file mode 100644 index 000000000000..7f356c2e6abf --- /dev/null +++ b/qcom/scuba-iot-idp-overlay.dts @@ -0,0 +1,12 @@ +/dts-v1/; +/plugin/; + +#include +#include "scuba-iot-idp.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Scuba IDP"; + compatible = "qcom,scuba-idp", "qcom,scuba-iot", "qcom,idp"; + qcom,msm-id = <441 0x10000>, <471 0x10000>; + qcom,board-id = <34 0>; +}; diff --git a/qcom/scuba-iot-idp.dtsi b/qcom/scuba-iot-idp.dtsi new file mode 100644 index 000000000000..d0b147079ba0 --- /dev/null +++ b/qcom/scuba-iot-idp.dtsi @@ -0,0 +1,40 @@ +#include +#include + +&soc { + scuba_batterydata: qcom,battery-data { + qcom,batt-id-range-pct = <15>; + #include "qg-batterydata-alium-3600mah.dtsi" + #include "qg-batterydata-atl466271_3300mAh.dtsi" + }; +}; + +&pm2250_qg { + qcom,battery-data = <&scuba_batterydata>; + qcom,qg-iterm-ma = <150>; + qcom,hold-soc-while-full; + qcom,linearize-soc; + qcom,cl-feedback-on; + qcom,tcss-enable; + qcom,fvss-enable; + qcom,fvss-vbatt-mv = <3500>; + qcom,bass-enable; +}; + +&pm2250_charger { + interrupts-extended = <&tlmm 89 0>; + interrupt-names = "usb_id_irq"; + qcom,usb-id-gpio = <&tlmm 89 0>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_interrupt>; + + qcom,auto-recharge-soc = <98>; + qcom,suspend-input-on-debug-batt; + qcom,battery-data = <&scuba_batterydata>; + io-channels = <&pm2250_vadc ADC5_USB_IN_V_16>, + <&pm2250_vadc ADC5_CHG_TEMP>; + io-channel-names = "usb_in_voltage", + "chg_temp"; + qcom,thermal-mitigation = <2000000 1500000 1000000 500000>; +}; diff --git a/qcom/scuba-iot-pinctrl.dtsi b/qcom/scuba-iot-pinctrl.dtsi new file mode 100644 index 000000000000..d141c10c703b --- /dev/null +++ b/qcom/scuba-iot-pinctrl.dtsi @@ -0,0 +1,1096 @@ +&soc { + tlmm: pinctrl@500000 { + compatible = "qcom,scuba-pinctrl"; + reg = <0x500000 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + irqdomain-map-pass-thru = <0 0xff>; + irqdomain-map-mask = <0xff 0>; + + qupv3_se4_2uart_pins: qupv3_se4_2uart_pins { + qupv3_se4_2uart_active: qupv3_se4_2uart_active { + mux { + pins = "gpio12", "gpio13"; + function = "qup4"; + }; + + config { + pins = "gpio12", "gpio13"; + drive-strength = <2>; + bias-disable; + }; + }; + + qupv3_se4_2uart_sleep: qupv3_se4_2uart_sleep { + mux { + pins = "gpio12", "gpio13"; + function = "gpio"; + }; + + config { + pins = "gpio12", "gpio13"; + drive-strength = <2>; + bias-pull-down; + }; + }; + }; + /* SDC pin type */ + sdc1_clk_on: sdc1_clk_on { + config { + pins = "sdc1_clk"; + bias-disable; /* NO pull */ + drive-strength = <16>; /* 16 MA */ + }; + }; + + sdc1_clk_off: sdc1_clk_off { + config { + pins = "sdc1_clk"; + bias-disable; /* NO pull */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc1_cmd_on: sdc1_cmd_on { + config { + pins = "sdc1_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <14>; /* 14 MA */ + }; + }; + + sdc1_cmd_off: sdc1_cmd_off { + config { + pins = "sdc1_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc1_data_on: sdc1_data_on { + config { + pins = "sdc1_data"; + bias-pull-up; /* pull up */ + drive-strength = <14>; /* 14 MA */ + }; + }; + + sdc1_data_off: sdc1_data_off { + config { + pins = "sdc1_data"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc1_rclk_on: sdc1_rclk_on { + config { + pins = "sdc1_rclk"; + bias-pull-down; /* pull down */ + }; + }; + + sdc1_rclk_off: sdc1_rclk_off { + config { + pins = "sdc1_rclk"; + bias-pull-down; /* pull down */ + }; + }; + + sdc2_clk_on: sdc2_clk_on { + config { + pins = "sdc2_clk"; + bias-disable; /* NO pull */ + drive-strength = <16>; /* 16 MA */ + }; + }; + + sdc2_clk_off: sdc2_clk_off { + config { + pins = "sdc2_clk"; + bias-disable; /* NO pull */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc2_cmd_on: sdc2_cmd_on { + config { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <14>; /* 14 MA */ + }; + }; + + sdc2_cmd_off: sdc2_cmd_off { + config { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc2_data_on: sdc2_data_on { + config { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <14>; /* 14 MA */ + }; + }; + + sdc2_data_off: sdc2_data_off { + config { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc2_cd_on: cd_on { + mux { + pins = "gpio88"; + function = "gpio"; + }; + + config { + pins = "gpio88"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_cd_off: cd_off { + mux { + pins = "gpio88"; + function = "gpio"; + }; + + config { + pins = "gpio88"; + drive-strength = <2>; + bias-disable; + }; + }; + + /* WSA speaker reset pin1 */ + spkr_1_sd_n { + spkr_1_sd_n_sleep: spkr_1_sd_n_sleep { + mux { + pins = "gpio106"; + function = "gpio"; + }; + + config { + pins = "gpio106"; + drive-strength = <2>; /* 2 mA */ + bias-pull-down; + input-enable; + }; + }; + + spkr_1_sd_n_active: spkr_1_sd_n_active { + mux { + pins = "gpio106"; + function = "gpio"; + }; + + config { + pins = "gpio106"; + drive-strength = <16>; /* 16 mA */ + bias-disable; + output-high; + }; + }; + }; + + fsa_usbc_ana_en_n@102 { + fsa_usbc_ana_en: fsa_usbc_ana_en { + mux { + pins = "gpio102"; + function = "gpio"; + }; + + config { + pins = "gpio102"; + drive-strength = <2>; + bias-disable; + output-low; + }; + }; + }; + + qupv3_se0_i2c_pins: qupv3_se0_i2c_pins { + qupv3_se0_i2c_active: qupv3_se0_i2c_active { + mux { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + + config { + pins = "gpio0", "gpio1"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qupv3_se0_i2c_sleep: qupv3_se0_i2c_sleep { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + }; + + config { + pins = "gpio0", "gpio1"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + qupv3_se0_spi_pins: qupv3_se0_spi_pins { + qupv3_se0_spi_active: qupv3_se0_spi_active { + mux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup0"; + }; + + config { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + drive-strength = <6>; + bias-disable; + }; + }; + + qupv3_se0_spi_sleep: qupv3_se0_spi_sleep { + mux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "gpio"; + }; + + config { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + drive-strength = <6>; + bias-disable; + }; + }; + }; + + qupv3_se1_i2c_pins: qupv3_se1_i2c_pins { + qupv3_se1_i2c_active: qupv3_se1_i2c_active { + mux { + pins = "gpio4", "gpio5"; + function = "qup1"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qupv3_se1_i2c_sleep: qupv3_se1_i2c_sleep { + mux { + pins = "gpio4", "gpio5"; + function = "gpio"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + nfc { + nfc_int_active: nfc_int_active { + /* active state */ + mux { + /* GPIO 70 NFC Read Interrupt */ + pins = "gpio70"; + function = "gpio"; + }; + + config { + pins = "gpio70"; + drive-strength = <2>; /* 2 MA */ + bias-pull-up; + }; + }; + + nfc_int_suspend: nfc_int_suspend { + /* sleep state */ + mux { + /* GPIO 70 NFC Read Interrupt */ + pins = "gpio70"; + function = "gpio"; + }; + + config { + pins = "gpio70"; + drive-strength = <2>; /* 2 MA */ + bias-pull-up; + }; + }; + + nfc_enable_active: nfc_enable_active { + /* active state */ + mux { + /* 69: Enable 31: Firmware */ + pins = "gpio69", "gpio31"; + function = "gpio"; + }; + + config { + pins = "gpio69", "gpio31"; + drive-strength = <2>; /* 2 MA */ + bias-pull-up; + }; + }; + + nfc_enable_suspend: nfc_enable_suspend { + /* sleep state */ + mux { + /* 69: Enable 31: Firmware */ + pins = "gpio69", "gpio31"; + function = "gpio"; + }; + + config { + pins = "gpio69", "gpio31"; + drive-strength = <2>; /* 2 MA */ + bias-disable; + }; + }; + + nfc_clk_req_active: nfc_clk_req_active { + /* active state */ + mux { + /* GPIO 86: NFC CLOCK REQUEST */ + pins = "gpio86"; + function = "gpio"; + }; + + config { + pins = "gpio86"; + drive-strength = <2>; /* 2 MA */ + bias-pull-up; + }; + }; + + nfc_clk_req_suspend: nfc_clk_req_suspend { + /* sleep state */ + mux { + /* GPIO 86: NFC CLOCK REQUEST */ + pins = "gpio86"; + function = "gpio"; + }; + + config { + pins = "gpio86"; + drive-strength = <2>; /* 2 MA */ + bias-disable; + }; + }; + }; + + qupv3_se1_spi_pins: qupv3_se1_spi_pins { + qupv3_se1_spi_active: qupv3_se1_spi_active { + mux { + pins = "gpio4", "gpio5", + "gpio69", "gpio70"; + function = "qup1"; + }; + + config { + pins = "gpio4", "gpio5", + "gpio69", "gpio70"; + drive-strength = <6>; + bias-disable; + }; + }; + + qupv3_se1_spi_sleep: qupv3_se1_spi_sleep { + mux { + pins = "gpio4", "gpio5", + "gpio69", "gpio70"; + function = "gpio"; + }; + + config { + pins = "gpio4", "gpio5", + "gpio69", "gpio70"; + drive-strength = <6>; + bias-disable; + }; + }; + }; + + qupv3_se2_i2c_pins: qupv3_se2_i2c_pins { + qupv3_se2_i2c_active: qupv3_se2_i2c_active { + mux { + pins = "gpio6", "gpio7"; + function = "qup2"; + }; + + config { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qupv3_se2_i2c_sleep: qupv3_se2_i2c_sleep { + mux { + pins = "gpio6", "gpio7"; + function = "gpio"; + }; + + config { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + qupv3_se2_spi_pins: qupv3_se2_spi_pins { + qupv3_se2_spi_active: qupv3_se2_spi_active { + mux { + pins = "gpio6", "gpio7", + "gpio71", "gpio80"; + function = "qup2"; + }; + + config { + pins = "gpio6", "gpio7", + "gpio71", "gpio80"; + drive-strength = <6>; + bias-disable; + }; + }; + + qupv3_se2_spi_sleep: qupv3_se2_spi_sleep { + mux { + pins = "gpio6", "gpio7", + "gpio71", "gpio80"; + function = "gpio"; + }; + + config { + pins = "gpio6", "gpio7", + "gpio71", "gpio80"; + drive-strength = <6>; + bias-disable; + }; + }; + }; + + qupv3_se3_4uart_pins: qupv3_se3_4uart_pins { + qupv3_se3_default_ctsrtsrx: + qupv3_se3_default_ctsrtsrx { + mux { + pins = "gpio8", "gpio9", "gpio11"; + function = "gpio"; + }; + + config { + pins = "gpio8", "gpio9", "gpio11"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + qupv3_se3_default_tx: + qupv3_se3_default_tx { + mux { + pins = "gpio10"; + function = "gpio"; + }; + + config { + pins = "gpio10"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qupv3_se3_ctsrx: qupv3_se3_ctsrx { + mux { + pins = "gpio8", "gpio11"; + function = "qup3"; + }; + + config { + pins = "gpio8", "gpio11"; + drive-strength = <2>; + bias-disable; + }; + }; + + qupv3_se3_rts: qupv3_se3_rts { + mux { + pins = "gpio9"; + function = "qup3"; + }; + + config { + pins = "gpio9"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + qupv3_se3_tx: qupv3_se3_tx { + mux { + pins = "gpio10"; + function = "qup3"; + }; + + config { + pins = "gpio10"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + qupv3_se5_i2c_pins: qupv3_se5_i2c_pins { + qupv3_se5_i2c_active: qupv3_se5_i2c_active { + mux { + pins = "gpio14", "gpio15"; + function = "qup5"; + }; + + config { + pins = "gpio14", "gpio15"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qupv3_se5_i2c_sleep: qupv3_se5_i2c_sleep { + mux { + pins = "gpio14", "gpio15"; + function = "gpio"; + }; + + config { + pins = "gpio14", "gpio15"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + qupv3_se5_spi_pins: qupv3_se5_spi_pins { + qupv3_se5_spi_active: qupv3_se5_spi_active { + mux { + pins = "gpio14", "gpio15", + "gpio16", "gpio17"; + function = "qup5"; + }; + + config { + pins = "gpio14", "gpio15", + "gpio16", "gpio17"; + drive-strength = <6>; + bias-disable; + }; + }; + + qupv3_se5_spi_sleep: qupv3_se5_spi_sleep { + mux { + pins = "gpio14", "gpio15", + "gpio16", "gpio17"; + function = "gpio"; + }; + + config { + pins = "gpio14", "gpio15", + "gpio16", "gpio17"; + drive-strength = <6>; + bias-disable; + }; + }; + }; + + pmx_sde: pmx_sde { + sde_dsi_active: sde_dsi_active { + mux { + pins = "gpio82", "gpio105"; + function = "gpio"; + }; + + config { + pins = "gpio82", "gpio105"; + drive-strength = <8>; + bias-disable = <0>; + }; + }; + + sde_dsi_suspend: sde_dsi_suspend { + mux { + pins = "gpio82", "gpio105"; + function = "gpio"; + }; + + config { + pins = "gpio82", "gpio105"; + drive-strength = <2>; + bias-pull-down; + }; + }; + }; + + pmx_sde_te { + sde_te_active: sde_te_active { + mux { + pins = "gpio81"; + function = "mdp_vsync"; + }; + + config { + pins = "gpio81"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + sde_te_suspend: sde_te_suspend { + mux { + pins = "gpio81"; + function = "mdp_vsync"; + }; + + config { + pins = "gpio81"; + drive-strength = <2>; + bias-pull-down; + }; + }; + }; + + pmx_ts_int_active { + ts_int_active: ts_int_active { + mux { + pins = "gpio80"; + function = "gpio"; + }; + + config { + pins = "gpio80"; + drive-strength = <8>; + bias-pull-up; + }; + }; + }; + + pmx_ts_int_suspend { + ts_int_suspend: ts_int_suspend { + mux { + pins = "gpio80"; + function = "gpio"; + }; + + config { + pins = "gpio80"; + drive-strength = <2>; + bias-pull-down; + }; + }; + }; + + pmx_ts_reset_active { + ts_reset_active: ts_reset_active { + mux { + pins = "gpio71"; + function = "gpio"; + }; + + config { + pins = "gpio71"; + drive-strength = <8>; + bias-pull-up; + }; + }; + }; + + pmx_ts_reset_suspend { + ts_reset_suspend: ts_reset_suspend { + mux { + pins = "gpio71"; + function = "gpio"; + }; + + config { + pins = "gpio71"; + drive-strength = <2>; + bias-pull-down; + }; + }; + }; + + pmx_ts_release { + ts_release: ts_release { + mux { + pins = "gpio80", "gpio71"; + function = "gpio"; + }; + + config { + pins = "gpio80", "gpio71"; + drive-strength = <2>; + bias-pull-down; + }; + }; + }; + + pm8008_interrupt: pm8008_interrupt { + mux { + pins = "gpio25"; + function = "gpio"; + }; + + config { + pins = "gpio25"; + bias-disable; + input-enable; + }; + }; + + pm8008_active: pm8008_active { + mux { + pins = "gpio26"; + function = "gpio"; + }; + + config { + pins = "gpio26"; + bias-pull-up; + output-high; + drive-strength = <2>; + }; + }; + + cci0_suspend: cci0_suspend { + mux { + /* CLK, DATA*/ + pins = "gpio23", "gpio22"; + function = "cci_i2c"; + }; + + config { + pins = "gpio23", "gpio22"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cci0_active: cci0_active { + mux { + /* CLK, DATA*/ + pins = "gpio23", "gpio22"; + function = "cci_i2c"; + }; + + config { + pins = "gpio23", "gpio22"; + bias-pull-up; /* PULL UP*/ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cci1_suspend: cci1_suspend { + mux { + /* CLK, DATA*/ + pins = "gpio30", "gpio29"; + function = "cci_i2c"; + }; + + config { + pins = "gpio30", "gpio29"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cci1_active: cci1_active { + mux { + /* CLK, DATA*/ + pins = "gpio30", "gpio29"; + function = "cci_i2c"; + }; + + config { + pins = "gpio30", "gpio29"; + bias-pull-up; /* PULL UP*/ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_mclk0_active: cam_sensor_mclk0_active { + /* MCLK 0*/ + mux { + pins = "gpio20"; + function = "cam_mclk"; + }; + + config { + pins = "gpio20"; + bias-disable; /* No PULL */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend { + /* MCLK 0*/ + mux { + pins = "gpio20"; + function = "cam_mclk"; + }; + + config { + pins = "gpio20"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_mclk1_active: cam_sensor_mclk1_active { + /* MCLK 1*/ + mux { + pins = "gpio21"; + function = "cam_mclk"; + }; + + config { + pins = "gpio21"; + bias-disable; /* No PULL */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend { + /* MCLK 1*/ + mux { + pins = "gpio21"; + function = "cam_mclk"; + }; + + config { + pins = "gpio21"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_mclk2_active: cam_sensor_mclk2_active { + /* MCLK 2*/ + mux { + pins = "gpio27"; + function = "cam_mclk"; + }; + + config { + pins = "gpio27"; + bias-disable; /* No PULL */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend { + /* MCLK 2*/ + mux { + pins = "gpio27"; + function = "cam_mclk"; + }; + + config { + pins = "gpio27"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_rear0_reset_active: cam_sensor_rear0_reset_active { + /* RESET0 */ + mux { + pins = "gpio18"; + function = "gpio"; + }; + + config { + pins = "gpio18"; + bias-disable; /* No PULL */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_rear0_reset_suspend: cam_sensor_rear0_reset_suspend { + /* RESET0 */ + mux { + pins = "gpio18"; + function = "gpio"; + }; + + config { + pins = "gpio18"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + output-low; + }; + }; + + cam_sensor_rear1_reset_active: cam_sensor_rear1_reset_active { + /* RESET1 */ + mux { + pins = "gpio19"; + function = "gpio"; + }; + + config { + pins = "gpio19"; + bias-disable; /* No PULL */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_rear1_reset_suspend: cam_sensor_rear1_reset_suspend { + /* RESET1 */ + mux { + pins = "gpio19"; + function = "gpio"; + }; + + config { + pins = "gpio19"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + output-low; + }; + }; + + + cam_sensor_front0_reset_active: cam_sensor_front0_reset_active { + /* RESET0 */ + mux { + pins = "gpio24"; + function = "gpio"; + }; + + config { + pins = "gpio24"; + bias-disable; /* No PULL */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_front0_reset_suspend: cam_sensor_front0_reset_suspend { + /* RESET0 */ + mux { + pins = "gpio24"; + function = "gpio"; + }; + + config { + pins = "gpio24"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + output-low; + }; + }; + + cam_sensor_csi_mux_oe_active: cam_sensor_csi_mux_oe_active { + /*CSIMUX_OE*/ + mux { + pins = "gpio113"; + function = "gpio"; + }; + + config { + pins = "gpio113"; + bias-disable; /* No PULL */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_csi_mux_oe_suspend: cam_sensor_csi_mux_oe_suspend { + /* CSIMUX_OE */ + mux { + pins = "gpio113"; + function = "gpio"; + }; + + config { + pins = "gpio113"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + output-low; + }; + }; + + cam_sensor_csi_mux_sel_active: cam_sensor_csi_mux_sel_active { + /*CSIMUX_SEL*/ + mux { + pins = "gpio114"; + function = "gpio"; + }; + + config { + pins = "gpio114"; + bias-disable; /* No PULL */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_csi_mux_sel_suspend: cam_sensor_csi_mux_sel_suspend { + /* CSIMUX_SEL */ + mux { + pins = "gpio114"; + function = "gpio"; + }; + + config { + pins = "gpio114"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + output-low; + }; + }; + + gpio_vol_up: gpio_vol_up { + mux { + pins = "gpio96"; + function = "gpio"; + }; + + config { + pins = "gpio96"; + drive-strength = <2>; + bias-pull-up; + input-enable; + }; + }; + + usb_id_interrupt: usb_id_interrupt { + mux { + pins = "gpio89"; + function = "gpio"; + }; + + config { + pins = "gpio89"; + bias-pull-up; + input-enable; + }; + }; + }; +}; diff --git a/qcom/scuba-iot.dts b/qcom/scuba-iot.dts new file mode 100644 index 000000000000..804c12bd9c93 --- /dev/null +++ b/qcom/scuba-iot.dts @@ -0,0 +1,9 @@ +/dts-v1/; + +#include "scuba-iot.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Scuba IOT SoC"; + compatible = "qcom,scuba-iot"; + qcom,board-id = <0 0>; +}; diff --git a/qcom/scuba-iot.dtsi b/qcom/scuba-iot.dtsi new file mode 100644 index 000000000000..c07dcefb4820 --- /dev/null +++ b/qcom/scuba-iot.dtsi @@ -0,0 +1,707 @@ +#include +#include +#include + +/ { + model = "Qualcomm Technologies, Inc. SCUBA"; + compatible = "qcom,scuba"; + qcom,msm-id = <441 0x10000>; + + #address-cells = <2>; + #size-cells = <2>; + memory { device_type = "memory"; reg = <0 0 0 0>; }; + + mem-offline { + compatible = "qcom,mem-offline"; + offline-sizes = <0x1 0x40000000 0x0 0x40000000>, + <0x1 0xc0000000 0x0 0x80000000>, + <0x2 0xc0000000 0x1 0x40000000>; + granule = <512>; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "arm,arch-cache"; + cache-level = <2>; + }; + + L1_I_0: l1-icache { + compatible = "arm,arch-cache"; + }; + + L1_D_0: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_0>; + + L1_I_1: l1-icache { + compatible = "arm,arch-cache"; + }; + + L1_D_1: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_0>; + + L1_I_2: l1-icache { + compatible = "arm,arch-cache"; + }; + + L1_D_2: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_0>; + + L1_I_3: l1-icache { + compatible = "arm,arch-cache"; + }; + + L1_D_3: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + }; + + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_region: hyp_region@45700000 { + no-map; + reg = <0x0 0x45700000 0x0 0x600000>; + }; + + xbl_aop_mem: xbl_aop_mem@45e00000 { + no-map; + reg = <0x0 0x45e00000 0x0 0x100000>; + }; + + sec_apps_mem: sec_apps_region@45fff000 { + no-map; + reg = <0x0 0x45fff000 0x0 0x1000>; + }; + + smem_region: smem@46000000 { + no-map; + reg = <0x0 0x46000000 0x0 0x200000>; + }; + + pil_modem_mem: modem_region@4ab00000 { + no-map; + reg = <0x0 0x4ab00000 0x0 0x6900000>; + }; + + pil_video_mem: pil_video_region@51400000 { + no-map; + reg = <0x0 0x51400000 0x0 0x500000>; + }; + + wlan_msa_mem: wlan_msa_region@51900000 { + no-map; + reg = <0x0 0x51900000 0x0 0x100000>; + }; + + pil_adsp_mem: adsp_regions@51a00000 { + no-map; + reg = <0x0 0x51a00000 0x0 0x1c00000>; + }; + + pil_ipa_fw_mem: ips_fw_region@53600000 { + no-map; + reg = <0x0 0x53600000 0x0 0x10000>; + }; + + pil_ipa_gsi_mem: ipa_gsi_region@53610000 { + no-map; + reg = <0x0 0x53610000 0x0 0x5000>; + }; + + pil_gpu_mem: gpu_region@53615000 { + no-map; + reg = <0x0 0x53615000 0x0 0x2000>; + }; + + removed_region: removed_region@60000000 { + no-map; + reg = <0x0 0x60000000 0x0 0x3900000>; + }; + + adsp_mem: adsp_region { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0x00000000 0 0xffffffff>; + reusable; + alignment = <0 0x400000>; + size = <0 0x800000>; + }; + + dump_mem: mem_dump_region { + compatible = "shared-dma-pool"; + alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>; + reusable; + size = <0 0x800000>; + }; + + secure_display_memory: secure_display_region { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0x00000000 0 0xffffffff>; + reusable; + alignment = <0 0x400000>; + size = <0 0x5c00000>; + }; + + cont_splash_memory: cont_splash_region@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + label = "cont_splash_region"; + }; + + dfps_data_memory: dfps_data_region@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + label = "dfps_data_region"; + }; + + disp_rdump_memory: disp_rdump_region@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + label = "disp_rdump_region"; + }; + + qseecom_mem: qseecom_region { + compatible = "shared-dma-pool"; + alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>; + reusable; + alignment = <0x0 0x400000>; + size = <0x0 0x1400000>; + }; + + qseecom_ta_mem: qseecom_ta_region { + compatible = "shared-dma-pool"; + alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>; + reusable; + alignment = <0x0 0x400000>; + size = <0x0 0x1000000>; + }; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>; + reusable; + alignment = <0x0 0x400000>; + size = <0x0 0x2000000>; + linux,cma-default; + }; + }; + + chosen { + bootargs = "rcupdate.rcu_expedited=1 rcu_nocbs=0-7"; + }; + + soc: soc { }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + reg = <0xf200000 0x10000>, /* GICD */ + <0xf300000 0x100000>; /* GICR * 8 */ + interrupts = <1 9 4>; + }; + + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 1 0xf08>, + <1 2 0xf08>, + <1 3 0xf08>, + <1 0 0xf08>; + clock-frequency = <19200000>; + }; + + + timer@f120000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf120000 0x1000>; + clock-frequency = <19200000>; + + frame@f121000 { + frame-number = <0>; + interrupts = <0 8 0x4>, + <0 7 0x4>; + reg = <0xf121000 0x1000>, + <0xf122000 0x1000>; + }; + + frame@f123000 { + frame-number = <1>; + interrupts = <0 9 0x4>; + reg = <0xf123000 0x1000>; + status = "disabled"; + }; + + frame@f124000 { + frame-number = <2>; + interrupts = <0 10 0x4>; + reg = <0xf124000 0x1000>; + status = "disabled"; + }; + + frame@f125000 { + frame-number = <3>; + interrupts = <0 11 0x4>; + reg = <0xf125000 0x1000>; + status = "disabled"; + }; + + frame@f126000 { + frame-number = <4>; + interrupts = <0 12 0x4>; + reg = <0xf126000 0x1000>; + status = "disabled"; + }; + + frame@f127000 { + frame-number = <5>; + interrupts = <0 13 0x4>; + reg = <0xf127000 0x1000>; + status = "disabled"; + }; + + frame@f128000 { + frame-number = <6>; + interrupts = <0 14 0x4>; + reg = <0xf128000 0x1000>; + status = "disabled"; + }; + }; + + qcom,msm-imem@c125000 { + compatible = "qcom,msm-imem"; + reg = <0xc125000 0x1000>; + ranges = <0x0 0xc125000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + mem_dump_table@10 { + compatible = "qcom,msm-imem-mem_dump_table"; + reg = <0x10 0x8>; + }; + + restart_reason@65c { + compatible = "qcom,msm-imem-restart_reason"; + reg = <0x65c 0x4>; + }; + + dload_type@1c { + compatible = "qcom,msm-imem-dload-type"; + reg = <0x1c 0x4>; + }; + + boot_stats@6b0 { + compatible = "qcom,msm-imem-boot_stats"; + reg = <0x6b0 0x20>; + }; + + kaslr_offset@6d0 { + compatible = "qcom,msm-imem-kaslr_offset"; + reg = <0x6d0 0xc>; + }; + + pil@94c { + compatible = "qcom,msm-imem-pil"; + reg = <0x94c 0xc8>; + }; + + diag_dload@c8 { + compatible = "qcom,msm-imem-diag-dload"; + reg = <0xc8 0xc8>; + }; + }; + + restart@440b000 { + compatible = "qcom,pshold"; + reg = <0x440b000 0x4>, + <0x03d3000 0x4>; + reg-names = "pshold-base", "tcsr-boot-misc-detect"; + status="disabled"; + }; + + qcom,mpm2-sleep-counter@4403000 { + compatible = "qcom,mpm2-sleep-counter"; + reg = <0x4403000 0x1000>; + clock-frequency = <32768>; + status="disabled"; + }; + + qcom,msm-rtb { + compatible = "qcom,msm-rtb"; + qcom,rtb-size = <0x100000>; + status="disabled"; + }; + + qcom,chd_silver { + compatible = "qcom,core-hang-detect"; + label = "silver"; + qcom,threshold-arr = <0x0f1880b0 0x0f1980b0 + 0x0f1a80b0 0x0f1b80b0>; + qcom,config-arr = <0x0f1880b8 0x0f1980b8 + 0x0f1a80b8 0x0f1b80b8>; + + status="disabled"; + }; + + qfprom: qfprom@1b40000 { + compatible = "qcom,qfprom"; + reg = <0x1b40000 0x7000>; + #address-cells = <1>; + #size-cells = <1>; + read-only; + ranges; + status="disabled"; + feat_conf5: feat_conf5@6018 { + reg = <0x6018 0x4>; + }; + + }; + + wdog: qcom,wdt@f017000 { + compatible = "qcom,msm-watchdog"; + reg = <0xf017000 0x1000>; + reg-names = "wdt-base"; + interrupts = , + ; + qcom,bark-time = <11000>; + qcom,pet-time = <9360>; + qcom,ipi-ping; + qcom,wakeup-enable; + status = "disabled"; + }; + +dcc: dcc_v2@1be2000 { + compatible = "qcom,dcc-v2"; + reg = <0x1be2000 0x1000>, + <0x1bee000 0x2000>; + reg-names = "dcc-base", "dcc-ram-base"; + dcc-ram-offset = <0x2000>; + status = "disabled"; + }; + + rpm_bus: qcom,rpm-smd { + compatible = "qcom,rpm-smd"; + rpm-channel-name = "rpm_requests"; + interrupts = ; + rpm-channel-type = <15>; /* SMD_APPS_RPM */ + }; + + mem_dump { + compatible = "qcom,mem-dump"; + memory-region = <&dump_mem>; + + c0_context { + qcom,dump-size = <0x800>; + qcom,dump-id = <0x0>; + }; + + c1_context { + qcom,dump-size = <0x800>; + qcom,dump-id = <0x1>; + }; + + c2_context { + qcom,dump-size = <0x800>; + qcom,dump-id = <0x2>; + }; + + c3_context { + qcom,dump-size = <0x800>; + qcom,dump-id = <0x3>; + }; + + l1_icache0 { + qcom,dump-size = <0x9040>; + qcom,dump-id = <0x60>; + }; + + l1_icache1 { + qcom,dump-size = <0x9040>; + qcom,dump-id = <0x61>; + }; + + l1_icache2 { + qcom,dump-size = <0x9040>; + qcom,dump-id = <0x62>; + }; + + l1_icache3 { + qcom,dump-size = <0x9040>; + qcom,dump-id = <0x63>; + }; + + l1_dcache0 { + qcom,dump-size = <0x9040>; + qcom,dump-id = <0x80>; + }; + + l1_dcache1 { + qcom,dump-size = <0x9040>; + qcom,dump-id = <0x81>; + }; + + l1_dcache2 { + qcom,dump-size = <0x9040>; + qcom,dump-id = <0x82>; + }; + + l1_dcache3 { + qcom,dump-size = <0x9040>; + qcom,dump-id = <0x83>; + }; + + l2_tlb0 { + qcom,dump-size = <0x2000>; + qcom,dump-id = <0x120>; + }; + + l2_tlb1 { + qcom,dump-size = <0x2000>; + qcom,dump-id = <0x121>; + }; + + l2_tlb2 { + qcom,dump-size = <0x2000>; + qcom,dump-id = <0x122>; + }; + + l2_tlb3 { + qcom,dump-size = <0x2000>; + qcom,dump-id = <0x123>; + }; + }; + + spmi_bus: qcom,spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x1c40000 0x1100>, + <0x1e00000 0x2000000>, + <0x3e00000 0x100000>, + <0x3f00000 0xa0000>, + <0x1c0a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; +}; + +#include "pm2250.dtsi" +#include "pm2250-rpm-regulator.dtsi" +#include "scuba-regulator.dtsi" +#include "scuba-iot-pinctrl.dtsi" +#include "scuba-ion.dtsi" +#include "msm-arm-smmu-scuba.dtsi" + +&pm2250_vadc { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&conn_therm_default &skin_therm_default>; + + xo_therm { + reg = ; + label = "xo_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + pa_therm { + reg = ; + label = "pa_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + quiet_therm { + reg = ; + label = "quiet_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + msm_therm { + reg = ; + label = "msm_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + skin_therm { + reg = ; + label = "skin_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + conn_therm { + reg = ; + label = "conn_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; +}; + +&pm2250_gpios { + skin_therm { + skin_therm_default: skin_therm_default { + pins = "gpio5"; + bias-high-impedance; + }; + }; + + conn_therm { + conn_therm_default: conn_therm_default { + pins = "gpio6"; + bias-high-impedance; + }; + }; +}; + +&spmi_bus { + qcom,pm2250@0 { + pm2250_adc_tm_iio: adc_tm@3400 { + compatible = "qcom,adc-tm5-iio"; + reg = <0x3400 0x100>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + io-channels = <&pm2250_vadc ADC5_XO_THERM_100K_PU>, + <&pm2250_vadc ADC5_AMUX_THM1_100K_PU>, + <&pm2250_vadc ADC5_AMUX_THM2_100K_PU>, + <&pm2250_vadc ADC5_AMUX_THM3_100K_PU>, + <&pm2250_vadc ADC5_GPIO3_100K_PU>, + <&pm2250_vadc ADC5_GPIO4_100K_PU>, + <&pm2250_vadc ADC5_SBUx>; + + xo_therm { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa_therm { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + quiet_therm { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + msm_therm { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin_therm { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + conn_therm { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + s3_die_temp { + reg = ; + }; + }; + }; +}; diff --git a/qcom/scuba-regulator.dtsi b/qcom/scuba-regulator.dtsi new file mode 100644 index 000000000000..a1344d005c24 --- /dev/null +++ b/qcom/scuba-regulator.dtsi @@ -0,0 +1,348 @@ +#include +#include + +&rpm_bus { + /* PM2250 S2 - VDD_CX supply */ + rpm-regulator-smpa2 { + status = "okay"; + qcom,resource-name = "rwcx"; + qcom,resource-id = <0>; + + VDD_CX_LEVEL: + VDD_GFX_LEVEL: + VDD_MSS_LEVEL: + S2A_LEVEL: pm2250_s2_level: regulator-s2-level { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_s2_level"; + qcom,set = <3>; + regulator-min-microvolt = + ; + regulator-max-microvolt = + ; + qcom,use-voltage-level; + }; + + VDD_CX_FLOOR_LEVEL: + VDD_MSS_FLOOR_LEVEL: + S2A_FLOOR_LEVEL: + pm2250_s2_floor_level: regulator-s2-floor-level { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_s2_floor_level"; + qcom,set = <3>; + regulator-min-microvolt = + ; + regulator-max-microvolt = + ; + qcom,use-voltage-floor-level; + qcom,always-send-voltage; + }; + + VDD_CX_LEVEL_AO: + VDD_MSS_LEVEL_AO: + S2A_LEVEL_AO: pm2250_s2_level_ao: regulator-s2-level-ao { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_s2_level_ao"; + qcom,set = <1>; + regulator-min-microvolt = + ; + regulator-max-microvolt = + ; + qcom,use-voltage-level; + }; + }; + + /* PM2250 L1 - VDD_MX/WCSS_MX supply */ + rpm-regulator-ldoa1 { + status = "okay"; + qcom,resource-name = "rwmx"; + qcom,resource-id = <0>; + + VDD_MX_LEVEL: + L1A_LEVEL: pm2250_l1_level: regulator-l1-level { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l1_level"; + qcom,set = <3>; + regulator-min-microvolt = + ; + regulator-max-microvolt = + ; + qcom,use-voltage-level; + }; + + VDD_MX_FLOOR_LEVEL: + L1A_FLOOR_LEVEL: + pm2250_l1_floor_level: regulator-l1-floor-level { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l1_floor_level"; + qcom,set = <3>; + regulator-min-microvolt = + ; + regulator-max-microvolt = + ; + qcom,use-voltage-floor-level; + qcom,always-send-voltage; + }; + + VDD_MX_LEVEL_AO: + L1A_LEVEL_AO: pm2250_l1_level_ao: regulator-l1-level-ao { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l1_level_ao"; + qcom,set = <1>; + regulator-min-microvolt = + ; + regulator-max-microvolt = + ; + qcom,use-voltage-level; + }; + }; + + rpm-regulator-smpa3 { + status = "okay"; + S3A: pm2250_s3: regulator-s3 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1662500>; + qcom,init-voltage = <400000>; + status = "okay"; + }; + }; + + rpm-regulator-smpa4 { + status = "okay"; + S4A: pm2250_s4: regulator-s4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2350000>; + qcom,init-voltage = <1200000>; + status = "okay"; + }; + }; + + /* VDD_LPI_CX supply */ + rpm-regulator-ldoa8 { + status = "okay"; + qcom,resource-name = "rwlc"; + qcom,resource-id = <0>; + + VDD_LPI_CX_LEVEL: + L8A_LEVEL: pm2250_l8_level: regulator-l8-level { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l8_level"; + qcom,set = <3>; + regulator-min-microvolt = + ; + regulator-max-microvolt = + ; + qcom,use-voltage-level; + }; + }; + + /* VDD_LPI_MX supply */ + rpm-regulator-ldoa9 { + status = "okay"; + qcom,resource-name = "rwlm"; + qcom,resource-id = <0>; + + VDD_LPI_MX_LEVEL: + L9A_LEVEL: pm2250_l9_level: regulator-l9-level { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "pm2250_l9_level"; + qcom,set = <3>; + regulator-min-microvolt = + ; + regulator-max-microvolt = + ; + qcom,use-voltage-level; + }; + }; + + rpm-regulator-ldoa2 { + status = "okay"; + L2A: pm2250_l2: regulator-l2 { + regulator-min-microvolt = <1060000>; + regulator-max-microvolt = <1300000>; + qcom,init-voltage = <1060000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa3 { + status = "okay"; + L3A: pm2250_l3: regulator-l3 { + regulator-min-microvolt = <570000>; + regulator-max-microvolt = <650000>; + qcom,init-voltage = <570000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa4 { + status = "okay"; + L4A: pm2250_l4: regulator-l4 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3050000>; + qcom,init-voltage = <1650000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa5 { + status = "okay"; + L5A: pm2250_l5: regulator-l5 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1312000>; + qcom,init-voltage = <1100000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa6 { + status = "okay"; + L6A: pm2250_l6: regulator-l6 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + qcom,init-voltage = <488000>; + status = "okay"; + }; + }; + + /* WCSS_CX */ + rpm-regulator-ldoa7 { + status = "okay"; + WCSS_CX: + L7A: pm2250_l7: regulator-l7 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + qcom,init-voltage = <400000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa10 { + status = "okay"; + L10A: pm2250_l10: regulator-l10 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1380000>; + qcom,init-voltage = <1150000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa11 { + status = "okay"; + L11A: pm2250_l11: regulator-l11 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1150000>; + qcom,init-voltage = <950000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa12 { + status = "okay"; + L12A: pm2250_l12: regulator-l12 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + qcom,init-voltage = <488000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa13 { + status = "okay"; + L13A: pm2250_l13: regulator-l13 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + qcom,init-voltage = <1650000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa14 { + status = "okay"; + L14A: pm2250_l14: regulator-l14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1950000>; + qcom,init-voltage = <1700000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa15 { + status = "okay"; + L15A: pm2250_l15: regulator-l15 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2000000>; + qcom,init-voltage = <1200000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa16 { + status = "okay"; + L16A: pm2250_l16: regulator-l16 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1950000>; + qcom,init-voltage = <1500000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa17 { + status = "okay"; + L17A: pm2250_l17: regulator-l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + qcom,init-voltage = <3000000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa18 { + status = "okay"; + L18A: pm2250_l18: regulator-l18 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + qcom,init-voltage = <1620000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa19 { + status = "okay"; + L19A: pm2250_l19: regulator-l19 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + qcom,init-voltage = <1620000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa20 { + status = "okay"; + L20A: pm2250_l20: regulator-l20 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + qcom,init-voltage = <2400000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa21 { + status = "okay"; + L21A: pm2250_l21: regulator-l21 { + regulator-min-microvolt = <2921000>; + regulator-max-microvolt = <3300000>; + qcom,init-voltage = <2921000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa22 { + status = "okay"; + L22A: pm2250_l22: regulator-l22 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3400000>; + qcom,init-voltage = <2850000>; + status = "okay"; + }; + }; +};