diff --git a/display/blair-sde-display-cdp.dtsi b/display/blair-sde-display-cdp.dtsi
new file mode 100644
index 000000000000..2ed34724f9df
--- /dev/null
+++ b/display/blair-sde-display-cdp.dtsi
@@ -0,0 +1,88 @@
+/* Should extend holi-sde-display-cdp-pm6125.dtsi */
+
+&tlmm {
+	pmx_sde_bias_en: pmx_sde_bias_en {
+		lcd_bias_en_active: lcd_bias_en_active {
+			mux {
+				pins = "gpio47";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio47";
+				drive-strength = <8>;   /* 8 mA */
+				bias-disable = <0>;   /* no pull */
+			};
+		};
+
+		lcd_bias_en_suspend: lcd_bias_en_suspend {
+			mux {
+				pins = "gpio47";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio47";
+				drive-strength = <2>;   /* 2 mA */
+				bias-pull-down;         /* PULL DOWN */
+			};
+		};
+	};
+};
+
+&pm6125_gpios {
+	lcd_backlight_ctrl {
+		lcd_backlight_ctrl_default: lcd_backlight_ctrl_default {
+			pins = "gpio8";
+			function = "func1";
+			input-disable;
+			output-enable;
+			bias-disable;
+			power-source = <1>;       /* 1.8V */
+			qcom,drive-strength = <2>;
+		};
+	};
+};
+
+&sde_dsi {
+	pinctrl-names = "panel_active", "panel_suspend", "pwm_pin";
+	pinctrl-0 = <&sde_te_active &disp_pins_reset &lcd_bias_en_active>;
+	pinctrl-1 = <&sde_te_suspend &lcd_bias_en_suspend>;
+	pinctrl-2 = <&lcd_backlight_ctrl_default>;
+};
+
+&dsi_nt36672e_fhd_plus_60_video {
+	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;
+	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
+	pwms = <&pm6125_pwm 0 0>;
+	qcom,bl-pmic-pwm-period-usecs = <100>;
+	qcom,mdss-dsi-bl-min-level = <1>;
+	qcom,mdss-dsi-bl-max-level = <4095>;
+	qcom,platform-reset-gpio = <&pmr735a_gpios 2 0>;
+	qcom,platform-en-gpio = <&tlmm 47 0>;
+	qcom,platform-bklight-en-gpio = <&pmr735a_gpios 3 0>;
+};
+
+&dsi_nt36672e_fhd_plus_120_video {
+	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;
+	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
+	pwms = <&pm6125_pwm 0 0>;
+	qcom,bl-pmic-pwm-period-usecs = <100>;
+	qcom,mdss-dsi-bl-min-level = <1>;
+	qcom,mdss-dsi-bl-max-level = <4095>;
+	qcom,platform-reset-gpio = <&pmr735a_gpios 2 0>;
+	qcom,platform-en-gpio = <&tlmm 47 0>;
+	qcom,platform-bklight-en-gpio = <&pmr735a_gpios 3 0>;
+};
+
+&dsi_nt36672e_fhd_plus_144_video {
+	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;
+	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
+	pwms = <&pm6125_pwm 0 0>;
+	qcom,bl-pmic-pwm-period-usecs = <100>;
+	qcom,mdss-dsi-bl-min-level = <1>;
+	qcom,mdss-dsi-bl-max-level = <4095>;
+	qcom,platform-reset-gpio = <&pmr735a_gpios 2 0>;
+	qcom,platform-en-gpio = <&tlmm 47 0>;
+	qcom,platform-bklight-en-gpio = <&pmr735a_gpios 3 0>;
+};
diff --git a/display/blair-sde-display-mtp.dtsi b/display/blair-sde-display-mtp.dtsi
new file mode 100644
index 000000000000..11ff69c6b5a2
--- /dev/null
+++ b/display/blair-sde-display-mtp.dtsi
@@ -0,0 +1 @@
+/* Should extend holi-sde-display-mtp-pm6125.dtsi */
diff --git a/display/blair-sde.dtsi b/display/blair-sde.dtsi
new file mode 100644
index 000000000000..1a5e4b575150
--- /dev/null
+++ b/display/blair-sde.dtsi
@@ -0,0 +1,24 @@
+#include "holi-sde.dtsi"
+
+&mdss_dsi0 {
+	vdda-1p2-supply = <&L4A>;
+};
+
+&mdss_dsi_phy0 {
+	compatible = "qcom,dsi-phy-v4.1";
+	reg = <0xae94400 0x800>,
+	      <0xae94900 0x27c>,
+	      <0xaf03000 0x8>,
+	      <0xae94200 0x100>;
+	reg-names = "dsi_phy", "pll_base", "gdsc_base", "dyn_refresh_base";
+	pll-label = "dsi_pll_5nm";
+
+	qcom,platform-lane-config = [00 00 0a 0a
+				     00 00 0a 0a
+				     00 00 0a 0a
+				     00 00 0a 0a
+				     00 00 8a 8a];
+
+	vdda-0p9-supply = <&S1E_LEVEL>;
+};
+
diff --git a/display/holi-sde-display-common.dtsi b/display/holi-sde-display-common.dtsi
index 18078ece180f..b9bd7bf572f0 100644
--- a/display/holi-sde-display-common.dtsi
+++ b/display/holi-sde-display-common.dtsi
@@ -163,6 +163,21 @@
 		};
 	};
 
+	dsi_panel_pwr_supply_no_labibb: dsi_panel_pwr_supply_no_labibb {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		qcom,panel-supply-entry@0 {
+			reg = <0>;
+			qcom,supply-name = "vddio";
+			qcom,supply-min-voltage = <1800000>;
+			qcom,supply-max-voltage = <1800000>;
+			qcom,supply-enable-load = <62000>;
+			qcom,supply-disable-load = <80>;
+			qcom,supply-post-on-sleep = <20>;
+		};
+	};
+
 	sde_dsi: qcom,dsi-display-primary {
 		compatible = "qcom,dsi-display";
 		label = "primary";