From a546cb523dc1aa5f6f859b28644ca429b76ff120 Mon Sep 17 00:00:00 2001 From: Michael Bestas Date: Wed, 19 Mar 2025 09:27:10 +0200 Subject: [PATCH] Documentation: Remove slg51000.txt This conflicts with the upstream kernel documentation. Change-Id: I41c0a65bb0ade4e190f224f690715caba5a7d48d --- .../bindings/regulator/slg51000.txt | 84 ------------------- 1 file changed, 84 deletions(-) delete mode 100644 Documentation/devicetree/bindings/regulator/slg51000.txt diff --git a/Documentation/devicetree/bindings/regulator/slg51000.txt b/Documentation/devicetree/bindings/regulator/slg51000.txt deleted file mode 100644 index 73f7d9c1cb76..000000000000 --- a/Documentation/devicetree/bindings/regulator/slg51000.txt +++ /dev/null @@ -1,84 +0,0 @@ -* Dialog Semiconductor SLG51000 Voltage Regulator - -Required properties: -- compatible : Should be "dlg,slg51000" for SLG51000 -- reg : Specifies the I2C slave address. - -Optional properties: -- interrupt-parent : Specifies the reference to the interrupt controller. -- interrupts : IRQ line information. -- dlg,cs-gpios : Specify a valid GPIO for chip select - -Sub-nodes: -- regulators : This node defines the settings for the regulators. - The content of the sub-node is defined by the standard binding - for regulators; see regulator.txt. - - The SLG51000 regulators are bound using their names listed below: - ldo1 - ldo2 - ldo3 - ldo4 - ldo5 - ldo6 - ldo7 - -Optional properties for regulators: -- enable-gpios : Specify a valid GPIO for platform control of the regualtor. - -Example: - pmic: slg51000@75 { - compatible = "dlg,slg51000"; - reg = <0x75>; - - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; - - regulators { - ldo1 { - regulator-name = "ldo1"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - ldo2 { - regulator-name = "ldo2"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH> - }; - - ldo3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3750000>; - }; - - ldo4 { - regulator-name = "ldo4"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3750000>; - }; - - ldo5 { - regulator-name = "ldo5"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1200000>; - }; - - ldo6 { - regulator-name = "ldo6"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1200000>; - }; - - ldo7 { - regulator-name = "ldo7"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3750000>; - regulator-boot-on; - }; - }; - };