clocksource: Use a plain u64 instead of cycle_t

There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: John Stultz <[email protected]>

arch/mips/alchemy/common/time.c

@@ -44,7 +44,7 @@
 /* 32kHz clock enabled and detected */
 #define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
 
-static cycle_t au1x_counter1_read(struct clocksource *cs)
+static u64 au1x_counter1_read(struct clocksource *cs)
 {
 	return alchemy_rdsys(AU1000_SYS_RTCREAD);
 }

arch/mips/cavium-octeon/csrc-octeon.c

@@ -98,7 +98,7 @@ void octeon_init_cvmcount(void)
 	local_irq_restore(flags);
 }
 
-static cycle_t octeon_cvmcount_read(struct clocksource *cs)
+static u64 octeon_cvmcount_read(struct clocksource *cs)
 {
 	return read_c0_cvmcount();
 }

arch/mips/jz4740/time.c

@@ -34,7 +34,7 @@
 
 static uint16_t jz4740_jiffies_per_tick;
 
-static cycle_t jz4740_clocksource_read(struct clocksource *cs)
+static u64 jz4740_clocksource_read(struct clocksource *cs)
 {
 	return jz4740_timer_get_count(TIMER_CLOCKSOURCE);
 }

arch/mips/kernel/cevt-txx9.c

@@ -27,7 +27,7 @@ struct txx9_clocksource {
 	struct txx9_tmr_reg __iomem *tmrptr;
 };
 
-static cycle_t txx9_cs_read(struct clocksource *cs)
+static u64 txx9_cs_read(struct clocksource *cs)
 {
 	struct txx9_clocksource *txx9_cs =
 		container_of(cs, struct txx9_clocksource, cs);

arch/mips/kernel/csrc-bcm1480.c

@@ -25,9 +25,9 @@
 
 #include <asm/sibyte/sb1250.h>
 
-static cycle_t bcm1480_hpt_read(struct clocksource *cs)
+static u64 bcm1480_hpt_read(struct clocksource *cs)
 {
-	return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
+	return (u64) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
 }
 
 struct clocksource bcm1480_clocksource = {

arch/mips/kernel/csrc-ioasic.c

@@ -22,7 +22,7 @@
 #include <asm/dec/ioasic.h>
 #include <asm/dec/ioasic_addrs.h>
 
-static cycle_t dec_ioasic_hpt_read(struct clocksource *cs)
+static u64 dec_ioasic_hpt_read(struct clocksource *cs)
 {
 	return ioasic_read(IO_REG_FCTR);
 }

arch/mips/kernel/csrc-r4k.c

@@ -11,7 +11,7 @@
 
 #include <asm/time.h>
 
-static cycle_t c0_hpt_read(struct clocksource *cs)
+static u64 c0_hpt_read(struct clocksource *cs)
 {
 	return read_c0_count();
 }

arch/mips/kernel/csrc-sb1250.c

@@ -30,7 +30,7 @@
  * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
  * again.
  */
-static inline cycle_t sb1250_hpt_get_cycles(void)
+static inline u64 sb1250_hpt_get_cycles(void)
 {
 	unsigned int count;
 	void __iomem *addr;
@@ -41,7 +41,7 @@ static inline cycle_t sb1250_hpt_get_cycles(void)
 	return SB1250_HPT_VALUE - count;
 }
 
-static cycle_t sb1250_hpt_read(struct clocksource *cs)
+static u64 sb1250_hpt_read(struct clocksource *cs)
 {
 	return sb1250_hpt_get_cycles();
 }

arch/mips/loongson32/common/time.c

@@ -63,7 +63,7 @@ void __init ls1x_pwmtimer_init(void)
 	ls1x_pwmtimer_restart();
 }
 
-static cycle_t ls1x_clocksource_read(struct clocksource *cs)
+static u64 ls1x_clocksource_read(struct clocksource *cs)
 {
 	unsigned long flags;
 	int count;
@@ -107,7 +107,7 @@ static cycle_t ls1x_clocksource_read(struct clocksource *cs)
 
 	raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
 
-	return (cycle_t) (jifs * ls1x_jiffies_per_tick) + count;
+	return (u64) (jifs * ls1x_jiffies_per_tick) + count;
 }
 
 static struct clocksource ls1x_clocksource = {

arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c

@@ -144,7 +144,7 @@ void __init setup_mfgpt0_timer(void)
  * to just read by itself. So use jiffies to emulate a free
  * running counter:
  */
-static cycle_t mfgpt_read(struct clocksource *cs)
+static u64 mfgpt_read(struct clocksource *cs)
 {
 	unsigned long flags;
 	int count;
@@ -188,7 +188,7 @@ static cycle_t mfgpt_read(struct clocksource *cs)
 
 	raw_spin_unlock_irqrestore(&mfgpt_lock, flags);
 
-	return (cycle_t) (jifs * COMPARE) + count;
+	return (u64) (jifs * COMPARE) + count;
 }
 
 static struct clocksource clocksource_mfgpt = {

arch/mips/loongson64/loongson-3/hpet.c

@@ -248,9 +248,9 @@ void __init setup_hpet_timer(void)
 	pr_info("hpet clock event device register\n");
 }
 
-static cycle_t hpet_read_counter(struct clocksource *cs)
+static u64 hpet_read_counter(struct clocksource *cs)
 {
-	return (cycle_t)hpet_read(HPET_COUNTER);
+	return (u64)hpet_read(HPET_COUNTER);
 }
 
 static void hpet_suspend(struct clocksource *cs)

arch/mips/mti-malta/malta-time.c

@@ -75,7 +75,7 @@ static void __init estimate_frequencies(void)
 	unsigned int count, start;
 	unsigned char secs1, secs2, ctrl;
 	int secs;
-	cycle_t giccount = 0, gicstart = 0;
+	u64 giccount = 0, gicstart = 0;
 
 #if defined(CONFIG_KVM_GUEST) && CONFIG_KVM_GUEST_TIMER_FREQ
 	mips_hpt_frequency = CONFIG_KVM_GUEST_TIMER_FREQ * 1000000;

arch/mips/netlogic/common/time.c

@@ -59,14 +59,14 @@ unsigned int get_c0_compare_int(void)
 	return IRQ_TIMER;
 }
 
-static cycle_t nlm_get_pic_timer(struct clocksource *cs)
+static u64 nlm_get_pic_timer(struct clocksource *cs)
 {
 	uint64_t picbase = nlm_get_node(0)->picbase;
 
 	return ~nlm_pic_read_timer(picbase, PIC_CLOCK_TIMER);
 }
 
-static cycle_t nlm_get_pic_timer32(struct clocksource *cs)
+static u64 nlm_get_pic_timer32(struct clocksource *cs)
 {
 	uint64_t picbase = nlm_get_node(0)->picbase;
 

arch/mips/sgi-ip27/ip27-timer.c

@@ -140,7 +140,7 @@ static void __init hub_rt_clock_event_global_init(void)
 	setup_irq(irq, &hub_rt_irqaction);
 }
 
-static cycle_t hub_rt_read(struct clocksource *cs)
+static u64 hub_rt_read(struct clocksource *cs)
 {
 	return REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT);
 }