fw-api: CL 2836872 - update fw common interface files

WMI interface changes for CSA offload to FW for APs

Change-Id: I91470a3a9226e9968f91a78dffd28f596ac05c82
CRs-Fixed: 1107600

fw/wmi_services.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011-2016 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2011-2017 The Linux Foundation. All rights reserved.
  *
  * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
  *
@@ -186,6 +186,7 @@ typedef  enum  {
     WMI_SERVICE_REGULATORY_DB=117, /* support regulatory database in FW */
     WMI_SERVICE_11D_OFFLOAD=118, /* support 11D scan offload in FW */
     WMI_SERVICE_HW_DATA_FILTERING=119,
+    WMI_SERVICE_MULTIPLE_VDEV_RESTART=120, /* Support for single command for multiple vdev restart */
 
 
     /******* ADD NEW SERVICES HERE UNTIL ALL VALUES UP TO 128 ARE USED *******/

fw/wmi_tlv_defs.h

@@ -796,6 +796,8 @@ typedef enum {
     WMITLV_TAG_STRUC_wmi_connected_nlo_bss_band_rssi_pref,
     WMITLV_TAG_STRUC_wmi_peer_oper_mode_change_event_fixed_param,
     WMITLV_TAG_STRUC_wmi_chip_power_save_failure_detected_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_multiple_vdev_restart_request_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_csa_switch_count_status_event_fixed_param,
 } WMITLV_TAG_ID;
 
 /*
@@ -1116,6 +1118,7 @@ typedef enum {
     OP(WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_CMDID) \
     OP(WMI_BPF_SET_VDEV_ACTIVE_MODE_CMDID) \
     OP(WMI_HW_DATA_FILTER_CMDID) \
+    OP(WMI_PDEV_MULTIPLE_VDEV_RESTART_REQUEST_CMDID) \
     /* add new CMD_LIST elements above this line */
 
 
@@ -1292,6 +1295,7 @@ typedef enum {
     OP(WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_STATUS_EVENTID) \
     OP(WMI_PEER_OPER_MODE_CHANGE_EVENTID) \
     OP(WMI_PDEV_CHIP_POWER_SAVE_FAILURE_DETECTED_EVENTID) \
+    OP(WMI_PDEV_CSA_SWITCH_COUNT_STATUS_EVENTID) \
     /* add new EVT_LIST elements above this line */
 
 
@@ -3199,6 +3203,13 @@ WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_CMDID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_hw_data_filter_cmd_fixed_param, wmi_hw_data_filter_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
 WMITLV_CREATE_PARAM_STRUC(WMI_HW_DATA_FILTER_CMDID);
 
+/* Multiple vdev restart request cmd */
+#define WMITLV_TABLE_WMI_PDEV_MULTIPLE_VDEV_RESTART_REQUEST_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_multiple_vdev_restart_request_cmd_fixed_param, wmi_pdev_multiple_vdev_restart_request_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, vdev_ids, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_channel, wmi_channel, chan, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_MULTIPLE_VDEV_RESTART_REQUEST_CMDID);
+
 
 /************************** TLV definitions of WMI events *******************************/
 
@@ -4268,6 +4279,11 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PKGID_EVENTID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_add_mac_addr_to_rx_filter_status_event_fixed_param, wmi_vdev_add_mac_addr_to_rx_filter_status_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
 WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_STATUS_EVENTID);
 
+#define WMITLV_TABLE_WMI_PDEV_CSA_SWITCH_COUNT_STATUS_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_csa_switch_count_status_event_fixed_param, wmi_pdev_csa_switch_count_status_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, vdev_ids, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_CSA_SWITCH_COUNT_STATUS_EVENTID);
+
 
 #ifdef __cplusplus
 }

fw/wmi_unified.h

@@ -356,6 +356,8 @@ typedef enum {
     WMI_PDEV_GET_CHIP_POWER_STATS_CMDID,
     /** set stats reporting thresholds - see WMI_REPORT_STATS_EVENTID */
     WMI_PDEV_SET_STATS_THRESHOLD_CMDID,
+    /** vdev restart request for multiple vdevs */
+    WMI_PDEV_MULTIPLE_VDEV_RESTART_REQUEST_CMDID,
 
     /* VDEV (virtual device) specific commands */
     /** vdev create */
@@ -1093,6 +1095,9 @@ typedef enum {
     /** Power Save Failure Detected */
     WMI_PDEV_CHIP_POWER_SAVE_FAILURE_DETECTED_EVENTID,
 
+    /* Event to report the switch count in csa of one or more VDEVs */
+    WMI_PDEV_CSA_SWITCH_COUNT_STATUS_EVENTID,
+
     /* VDEV specific events */
     /** VDEV started event in response to VDEV_START request */
     WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
@@ -6674,6 +6679,14 @@ typedef struct {
     A_UINT32 tim_ie_offset;
     /** beacon buffer length. data is in TLV data[] */
     A_UINT32 buf_len;
+    /** CSA IE switch count offset from the beginning of data[]
+     *  Value 0 indicates CSA IE is not present in beacon template.
+     */
+    A_UINT32 csa_switch_count_offset; /* units = bytes */
+    /** Extended CSA IE switch count offset from the beginning of data[]
+     *  Value 0 indicates CSA IE is not present in beacon template.
+     */
+    A_UINT32 ext_csa_switch_count_offset; /* units = bytes */
 
 /*
  * The TLVs follows:
@@ -17685,6 +17698,7 @@ static INLINE A_UINT8 *wmi_id_to_name(A_UINT32 wmi_command)
         WMI_RETURN_STRING(WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_CMDID);
         WMI_RETURN_STRING(WMI_BPF_SET_VDEV_ACTIVE_MODE_CMDID);
         WMI_RETURN_STRING(WMI_HW_DATA_FILTER_CMDID);
+        WMI_RETURN_STRING(MI_PDEV_MULTIPLE_VDEV_RESTART_REQUEST_CMDID);
     }
 
     return "Invalid WMI cmd";
@@ -17882,6 +17896,51 @@ typedef struct {
     A_UINT32 hw_filter_bitmap; /* see WMI_HW_DATA_FILTER_BITMAP_TYPE */
 } wmi_hw_data_filter_cmd_fixed_param;
 
+/* This command is used whenever host wants to restart multiple
+ * VDEVs using single command and the VDEV that are restarted will
+ * need to have same properties they had before restart except for the
+ * operating channel
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_multiple_vdev_restart_request_cmd_fixed_param */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     * In non-DBDC case host should set it to 0
+     */
+    A_UINT32 pdev_id;
+    /** unique id identifying the module, generated by the caller */
+    A_UINT32 requestor_id;
+    /** Disable H/W ack.
+     * During CAC, Our HW shouldn't ack directed frames
+     */
+    A_UINT32 disable_hw_ack;
+    /* Determine the duration of CAC on the given channel 'chan' */
+    A_UINT32 cac_duration_ms;
+    A_UINT32 num_vdevs;
+
+    /* The TLVs follows this structure:
+     * A_UINT32 vdev_ids[]; <--- Array of VDEV ids.
+     * wmi_channel chan; <------ WMI channel
+     */
+} wmi_pdev_multiple_vdev_restart_request_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_csa_switch_count_status_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     * In non-DBDC case host should set it to 0
+     */
+    A_UINT32 pdev_id;
+    /** CSA switch count value in the last transmitted beacon */
+    A_UINT32 current_switch_count;
+    A_UINT32 num_vdevs;
+
+    /* The TLVs follows this structure:
+     * A_UINT32 vdev_ids[]; <--- Array of VDEV ids.
+     */
+} wmi_pdev_csa_switch_count_status_event_fixed_param;
+
 
 /* ADD NEW DEFS HERE */
 

fw/wmi_version.h

@@ -36,7 +36,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 342
+#define __WMI_REVISION_ 343
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work