ARM: dts: msm: Add 60fps display support on Lahaina MTP 2.1

This change adds display support for r66451 dsc fhd plus
60fps command mode panel on lahaina.

Change-Id: Icec5feb452347aef02d69fe15f86717f7b4852fe
This commit is contained in:
Ravikanth Tuniki 2021-02-15 18:17:10 +05:30
commit a99804f01a
2 changed files with 34 additions and 0 deletions

View file

@ -15,6 +15,7 @@
#include "dsi-panel-r66451-dsc-fhd-plus-cmd-cphy.dtsi"
#include "dsi-panel-r66451-dsc-fhd-plus-video.dtsi"
#include "dsi-panel-r66451-dsc-fhd-plus-cmd.dtsi"
#include "dsi-panel-r66451-dsc-fhd-plus-60hz-cmd.dtsi"
#include "dsi-panel-r66451-dsc-fhd-plus-144hz-cmd.dtsi"
#include "dsi-panel-ext-bridge-1080p.dtsi"
#include "dsi-panel-sim-cmd.dtsi"
@ -273,6 +274,29 @@
};
};
&dsi_r66451_amoled_60hz_cmd {
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
qcom,dsi-dyn-clk-enable;
qcom,dsi-dyn-clk-list = <327096544 325733641 324370739>;
qcom,esd-check-enabled;
qcom,mdss-dsi-panel-status-check-mode = "reg_read";
qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode";
qcom,mdss-dsi-panel-status-value = <0x1c>;
qcom,mdss-dsi-panel-status-read-length = <1>;
qcom,mdss-dsi-display-timings {
timing@0 {
qcom,mdss-dsi-panel-phy-timings = [00 10 04 04 1e 1e 04
04 03 02 04 00 10 14];
qcom,display-topology = <1 1 1>;
qcom,default-topology-index = <0>;
};
};
};
&dsi_r66451_amoled_144hz_cmd {
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
qcom,dsi-select-sec-clocks = "mux_byte_clk1", "mux_pixel_clk1";

View file

@ -28,6 +28,16 @@
qcom,platform-reset-gpio = <&tlmm 24 0>;
};
&dsi_r66451_amoled_60hz_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,mdss-brightness-max-level = <255>;
qcom,mdss-dsi-bl-inverted-dbv;
qcom,platform-reset-gpio = <&tlmm 24 0>;
};
&dsi_r66451_amoled_video {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";