clk: imx: clk-pll14xx: unbypass PLL by default

When registering the PLL, unbypass the PLL.
The PLL has two bypass control bit, BYPASS and EXT_BYPASS.
we will expose EXT_BYPASS to clk driver for mux usage, and keep
BYPASS inside pll14xx usage. The PLL has a restriction that
when M/P change, need to RESET/BYPASS pll to avoid glitch, so
we could not expose BYPASS.

To make it easy for clk driver usage, unbypass PLL which does
not hurt current function.

Fixes: 8646d4dcc7 ("clk: imx: Add PLLs driver for imx8mm soc")
Reviewed-by: Leonard Crestez <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>

drivers/clk/imx/clk-pll14xx.c

@@ -368,6 +368,7 @@ struct clk *imx_clk_pll14xx(const char *name, const char *parent_name,
 	struct clk_pll14xx *pll;
 	struct clk *clk;
 	struct clk_init_data init;
+	u32 val;
 
 	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
 	if (!pll)
@@ -399,6 +400,10 @@ struct clk *imx_clk_pll14xx(const char *name, const char *parent_name,
 	pll->rate_table = pll_clk->rate_table;
 	pll->rate_count = pll_clk->rate_count;
 
+	val = readl_relaxed(pll->base + GNRL_CTL);
+	val &= ~BYPASS_MASK;
+	writel_relaxed(val, pll->base + GNRL_CTL);
+
 	clk = clk_register(NULL, &pll->hw);
 	if (IS_ERR(clk)) {
 		pr_err("%s: failed to register pll %s %lu\n",