Merge remote-tracking branch 'asoc/topic/tas5270' into asoc-next

Documentation/devicetree/bindings/sound/tas571x.txt

@@ -1,4 +1,4 @@
-Texas Instruments TAS5711/TAS5717/TAS5719 stereo power amplifiers
+Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 stereo power amplifiers
 
 The codec is controlled through an I2C interface.  It also has two other
 signals that can be wired up to GPIOs: reset (strongly recommended), and
@@ -6,7 +6,11 @@ powerdown (optional).
 
 Required properties:
 
-- compatible: "ti,tas5711", "ti,tas5717", or "ti,tas5719"
+- compatible: should be one of the following:
+  - "ti,tas5711",
+  - "ti,tas5717",
+  - "ti,tas5719",
+  - "ti,tas5721"
 - reg: The I2C address of the device
 - #sound-dai-cells: must be equal to 0
 
@@ -25,6 +29,8 @@ Optional properties:
 - PVDD_B-supply: regulator phandle for the PVDD_B supply (5711)
 - PVDD_C-supply: regulator phandle for the PVDD_C supply (5711)
 - PVDD_D-supply: regulator phandle for the PVDD_D supply (5711)
+- DRVDD-supply: regulator phandle for the DRVDD supply (5721)
+- PVDD-supply: regulator phandle for the PVDD supply (5721)
 
 Example:
 

Documentation/devicetree/bindings/sound/tas5720.txt

@@ -0,0 +1,25 @@
+Texas Instruments TAS5720 Mono Audio amplifier
+
+The TAS5720 serial control bus communicates through the I2C protocol only. The
+serial bus is also used for periodic codec fault checking/reporting during
+audio playback. For more product information please see the links below:
+
+http://www.ti.com/product/TAS5720L
+http://www.ti.com/product/TAS5720M
+
+Required properties:
+
+- compatible : "ti,tas5720"
+- reg : I2C slave address
+- dvdd-supply : phandle to a 3.3-V supply for the digital circuitry
+- pvdd-supply : phandle to a supply used for the Class-D amp and the analog
+
+Example:
+
+tas5720: tas5720@6c {
+	status = "okay";
+	compatible = "ti,tas5720";
+	reg = <0x6c>;
+	dvdd-supply = <&vdd_3v3_reg>;
+	pvdd-supply = <&amp_supply_reg>;
+};