Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Support ipv6 checksum offload in sunvnet driver, from Shannon
    Nelson.

 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
    Dumazet.

 3) Allow generic XDP to work on virtual devices, from John Fastabend.

 4) Add bpf device maps and XDP_REDIRECT, which can be used to build
    arbitrary switching frameworks using XDP. From John Fastabend.

 5) Remove UFO offloads from the tree, gave us little other than bugs.

 6) Remove the IPSEC flow cache, from Florian Westphal.

 7) Support ipv6 route offload in mlxsw driver.

 8) Support VF representors in bnxt_en, from Sathya Perla.

 9) Add support for forward error correction modes to ethtool, from
    Vidya Sagar Ravipati.

10) Add time filter for packet scheduler action dumping, from Jamal Hadi
    Salim.

11) Extend the zerocopy sendmsg() used by virtio and tap to regular
    sockets via MSG_ZEROCOPY. From Willem de Bruijn.

12) Significantly rework value tracking in the BPF verifier, from Edward
    Cree.

13) Add new jump instructions to eBPF, from Daniel Borkmann.

14) Rework rtnetlink plumbing so that operations can be run without
    taking the RTNL semaphore. From Florian Westphal.

15) Support XDP in tap driver, from Jason Wang.

16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.

17) Add Huawei hinic ethernet driver.

18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
    Delalande.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
  i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
  i40e: avoid NVM acquire deadlock during NVM update
  drivers: net: xgene: Remove return statement from void function
  drivers: net: xgene: Configure tx/rx delay for ACPI
  drivers: net: xgene: Read tx/rx delay for ACPI
  rocker: fix kcalloc parameter order
  rds: Fix non-atomic operation on shared flag variable
  net: sched: don't use GFP_KERNEL under spin lock
  vhost_net: correctly check tx avail during rx busy polling
  net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
  rxrpc: Make service connection lookup always check for retry
  net: stmmac: Delete dead code for MDIO registration
  gianfar: Fix Tx flow control deactivation
  cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
  cxgb4: Fix pause frame count in t4_get_port_stats
  cxgb4: fix memory leak
  tun: rename generic_xdp to skb_xdp
  tun: reserve extra headroom only when XDP is set
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  ...

tools/hv/bondvf.sh

@@ -1,232 +0,0 @@
-#!/bin/bash
-
-# This example script creates bonding network devices based on synthetic NIC
-# (the virtual network adapter usually provided by Hyper-V) and the matching
-# VF NIC (SRIOV virtual function). So the synthetic NIC and VF NIC can
-# function as one network device, and fail over to the synthetic NIC if VF is
-# down.
-#
-# Usage:
-# - After configured vSwitch and vNIC with SRIOV, start Linux virtual
-#   machine (VM)
-# - Run this scripts on the VM. It will create configuration files in
-#   distro specific directory.
-# - Reboot the VM, so that the bonding config are enabled.
-#
-# The config files are DHCP by default. You may edit them if you need to change
-# to Static IP or change other settings.
-#
-
-sysdir=/sys/class/net
-netvsc_cls={f8615163-df3e-46c5-913f-f2d2f965ed0e}
-bondcnt=0
-
-# Detect Distro
-if [ -f /etc/redhat-release ];
-then
-	cfgdir=/etc/sysconfig/network-scripts
-	distro=redhat
-elif grep -q 'Ubuntu' /etc/issue
-then
-	cfgdir=/etc/network
-	distro=ubuntu
-elif grep -q 'SUSE' /etc/issue
-then
-	cfgdir=/etc/sysconfig/network
-	distro=suse
-else
-	echo "Unsupported Distro"
-	exit 1
-fi
-
-echo Detected Distro: $distro, or compatible
-
-# Get a list of ethernet names
-list_eth=(`cd $sysdir && ls -d */ | cut -d/ -f1 | grep -v bond`)
-eth_cnt=${#list_eth[@]}
-
-echo List of net devices:
-
-# Get the MAC addresses
-for (( i=0; i < $eth_cnt; i++ ))
-do
-	list_mac[$i]=`cat $sysdir/${list_eth[$i]}/address`
-	echo ${list_eth[$i]}, ${list_mac[$i]}
-done
-
-# Find NIC with matching MAC
-for (( i=0; i < $eth_cnt-1; i++ ))
-do
-	for (( j=i+1; j < $eth_cnt; j++ ))
-	do
-		if [ "${list_mac[$i]}" = "${list_mac[$j]}" ]
-		then
-			list_match[$i]=${list_eth[$j]}
-			break
-		fi
-	done
-done
-
-function create_eth_cfg_redhat {
-	local fn=$cfgdir/ifcfg-$1
-
-	rm -f $fn
-	echo DEVICE=$1 >>$fn
-	echo TYPE=Ethernet >>$fn
-	echo BOOTPROTO=none >>$fn
-	echo UUID=`uuidgen` >>$fn
-	echo ONBOOT=yes >>$fn
-	echo PEERDNS=yes >>$fn
-	echo IPV6INIT=yes >>$fn
-	echo MASTER=$2 >>$fn
-	echo SLAVE=yes >>$fn
-}
-
-function create_eth_cfg_pri_redhat {
-	create_eth_cfg_redhat $1 $2
-}
-
-function create_bond_cfg_redhat {
-	local fn=$cfgdir/ifcfg-$1
-
-	rm -f $fn
-	echo DEVICE=$1 >>$fn
-	echo TYPE=Bond >>$fn
-	echo BOOTPROTO=dhcp >>$fn
-	echo UUID=`uuidgen` >>$fn
-	echo ONBOOT=yes >>$fn
-	echo PEERDNS=yes >>$fn
-	echo IPV6INIT=yes >>$fn
-	echo BONDING_MASTER=yes >>$fn
-	echo BONDING_OPTS=\"mode=active-backup miimon=100 primary=$2\" >>$fn
-}
-
-function del_eth_cfg_ubuntu {
-	local mainfn=$cfgdir/interfaces
-	local fnlist=( $mainfn )
-
-	local dirlist=(`awk '/^[ \t]*source/{print $2}' $mainfn`)
-
-	local i
-	for i in "${dirlist[@]}"
-	do
-		fnlist+=(`ls $i 2>/dev/null`)
-	done
-
-	local tmpfl=$(mktemp)
-
-	local nic_start='^[ \t]*(auto|iface|mapping|allow-.*)[ \t]+'$1
-	local nic_end='^[ \t]*(auto|iface|mapping|allow-.*|source)'
-
-	local fn
-	for fn in "${fnlist[@]}"
-	do
-		awk "/$nic_end/{x=0} x{next} /$nic_start/{x=1;next} 1" \
-			$fn >$tmpfl
-
-		cp $tmpfl $fn
-	done
-
-	rm $tmpfl
-}
-
-function create_eth_cfg_ubuntu {
-	local fn=$cfgdir/interfaces
-
-	del_eth_cfg_ubuntu $1
-	echo $'\n'auto $1 >>$fn
-	echo iface $1 inet manual >>$fn
-	echo bond-master $2 >>$fn
-}
-
-function create_eth_cfg_pri_ubuntu {
-	local fn=$cfgdir/interfaces
-
-	del_eth_cfg_ubuntu $1
-	echo $'\n'allow-hotplug $1 >>$fn
-	echo iface $1 inet manual >>$fn
-	echo bond-master $2 >>$fn
-	echo bond-primary $1 >>$fn
-}
-
-function create_bond_cfg_ubuntu {
-	local fn=$cfgdir/interfaces
-
-	del_eth_cfg_ubuntu $1
-
-	echo $'\n'auto $1 >>$fn
-	echo iface $1 inet dhcp >>$fn
-	echo bond-mode active-backup >>$fn
-	echo bond-miimon 100 >>$fn
-	echo bond-slaves none >>$fn
-}
-
-function create_eth_cfg_suse {
-        local fn=$cfgdir/ifcfg-$1
-
-        rm -f $fn
-	echo BOOTPROTO=none >>$fn
-	echo STARTMODE=auto >>$fn
-}
-
-function create_eth_cfg_pri_suse {
-	local fn=$cfgdir/ifcfg-$1
-
-	rm -f $fn
-	echo BOOTPROTO=none >>$fn
-	echo STARTMODE=hotplug >>$fn
-}
-
-function create_bond_cfg_suse {
-	local fn=$cfgdir/ifcfg-$1
-
-	rm -f $fn
-	echo BOOTPROTO=dhcp >>$fn
-	echo STARTMODE=auto >>$fn
-	echo BONDING_MASTER=yes >>$fn
-	echo BONDING_SLAVE_0=$2 >>$fn
-	echo BONDING_SLAVE_1=$3 >>$fn
-	echo BONDING_MODULE_OPTS=\'mode=active-backup miimon=100 primary=$2\' >>$fn
-}
-
-function create_bond {
-	local bondname=bond$bondcnt
-	local primary
-	local secondary
-
-	local class_id1=`cat $sysdir/$1/device/class_id 2>/dev/null`
-	local class_id2=`cat $sysdir/$2/device/class_id 2>/dev/null`
-
-	if [ "$class_id1" = "$netvsc_cls" ]
-	then
-		primary=$2
-		secondary=$1
-	elif [ "$class_id2" = "$netvsc_cls" ]
-	then
-		primary=$1
-		secondary=$2
-	else
-		return 0
-	fi
-
-	echo $'\nBond name:' $bondname
-
-	echo configuring $primary
-	create_eth_cfg_pri_$distro $primary $bondname
-
-	echo configuring $secondary
-	create_eth_cfg_$distro $secondary $bondname
-
-	echo creating: $bondname with primary slave: $primary
-	create_bond_cfg_$distro $bondname $primary $secondary
-
-	let bondcnt=bondcnt+1
-}
-
-for (( i=0; i < $eth_cnt-1; i++ ))
-do
-        if [ -n "${list_match[$i]}" ]
-        then
-		create_bond ${list_eth[$i]} ${list_match[$i]}
-        fi
-done