Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux

Pull i2c-embedded changes from Wolfram Sang:
 "Major changes:

   - lots of devicetree additions for existing drivers.  I tried hard to
     make sure the bindings are proper.  In more complicated cases, I
     requested acks from people having more experience with them than
     me.  That took a bit of extra time and also some time went into
     discussions with developers about what bindings are and what not.
     I have the feeling that the workflow with bindings should be
     improved to scale better.  I will spend some more thought on
     this...

   - i2c-muxes are succesfully used meanwhile, so we dropped
     EXPERIMENTAL for them and renamed the drivers to a standard pattern
     to match the rest of the subsystem.  They can also be used with
     devicetree now.

   - ixp2000 was removed since the whole platform goes away.

   - cleanups (strlcpy instead of strcpy, NULL instead of 0)

   - The rest is typical driver fixes I assume.

  All patches have been in linux-next at least since v3.4-rc6."

Fixed up trivial conflict in arch/arm/mach-lpc32xx/common.c due to the
same patch already having come in through the arm/soc trees, with
additional patches on top of it.

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (35 commits)
  i2c: davinci: Free requested IRQ in remove
  i2c: ocores: register OF i2c devices
  i2c: tegra: notify transfer-complete after clearing status.
  I2C: xiic: Add OF binding support
  i2c: Rename last mux driver to standard pattern
  i2c: tegra: fix 10bit address configuration
  i2c: muxes: rename first set of drivers to a standard pattern
  of/i2c: implement of_find_i2c_adapter_by_node
  i2c: implement i2c_verify_adapter
  i2c-s3c2410: Add HDMIPHY quirk for S3C2440
  i2c-s3c2410: Rework device type handling
  i2c: muxes are not EXPERIMENTAL anymore
  i2c/of: Automatically populate i2c mux busses from device tree data.
  i2c: Add a struct device * parameter to i2c_add_mux_adapter()
  of/i2c: call i2c_verify_client from of_find_i2c_device_by_node
  i2c: designware: Add clk_{un}prepare() support
  i2c: designware: add PM support
  i2c: ixp2000: remove driver
  i2c: pnx: add device tree support
  i2c: imx: don't use strcpy but strlcpy
  ...

include/linux/i2c-mux-gpio.h

@@ -1,5 +1,5 @@
 /*
- * gpio-i2cmux interface to platform code
+ * i2c-mux-gpio interface to platform code
  *
  * Peter Korsgaard <peter.korsgaard@barco.com>
  *
@@ -8,14 +8,14 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef _LINUX_GPIO_I2CMUX_H
-#define _LINUX_GPIO_I2CMUX_H
+#ifndef _LINUX_I2C_MUX_GPIO_H
+#define _LINUX_I2C_MUX_GPIO_H
 
 /* MUX has no specific idle mode */
-#define GPIO_I2CMUX_NO_IDLE	((unsigned)-1)
+#define I2C_MUX_GPIO_NO_IDLE	((unsigned)-1)
 
 /**
- * struct gpio_i2cmux_platform_data - Platform-dependent data for gpio-i2cmux
+ * struct i2c_mux_gpio_platform_data - Platform-dependent data for i2c-mux-gpio
  * @parent: Parent I2C bus adapter number
  * @base_nr: Base I2C bus number to number adapters from or zero for dynamic
  * @values: Array of bitmasks of GPIO settings (low/high) for each
@@ -25,7 +25,7 @@
  * @n_gpios: Number of GPIOs used to control MUX
  * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used
  */
-struct gpio_i2cmux_platform_data {
+struct i2c_mux_gpio_platform_data {
 	int parent;
 	int base_nr;
 	const unsigned *values;
@@ -35,4 +35,4 @@ struct gpio_i2cmux_platform_data {
 	unsigned idle;
 };
 
-#endif /* _LINUX_GPIO_I2CMUX_H */
+#endif /* _LINUX_I2C_MUX_GPIO_H */

include/linux/i2c-mux.h

@@ -34,7 +34,8 @@
  * mux control.
  */
 struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
-				void *mux_dev, u32 force_nr, u32 chan_id,
+				struct device *mux_dev,
+				void *mux_priv, u32 force_nr, u32 chan_id,
 				int (*select) (struct i2c_adapter *,
 					       void *mux_dev, u32 chan_id),
 				int (*deselect) (struct i2c_adapter *,

include/linux/i2c.h

@@ -232,6 +232,7 @@ struct i2c_client {
 #define to_i2c_client(d) container_of(d, struct i2c_client, dev)
 
 extern struct i2c_client *i2c_verify_client(struct device *dev);
+extern struct i2c_adapter *i2c_verify_adapter(struct device *dev);
 
 static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
 {

include/linux/of_i2c.h

@@ -20,6 +20,10 @@ extern void of_i2c_register_devices(struct i2c_adapter *adap);
 /* must call put_device() when done with returned i2c_client device */
 extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
 
+/* must call put_device() when done with returned i2c_adapter device */
+extern struct i2c_adapter *of_find_i2c_adapter_by_node(
+						struct device_node *node);
+
 #else
 static inline void of_i2c_register_devices(struct i2c_adapter *adap)
 {