diff --git a/qcom/blair-nopmi-milanf-common-overlay.dtsi b/qcom/blair-nopmi-milanf-common-overlay.dtsi
index f47bbaa2ff40..c06a693e018f 100644
--- a/qcom/blair-nopmi-milanf-common-overlay.dtsi
+++ b/qcom/blair-nopmi-milanf-common-overlay.dtsi
@@ -27,3 +27,42 @@
 		status = "okay";
 	};
 };
+
+&qupv3_se8_i2c {
+	sgm4154x: sgm4154x@3B {
+		status = "okay";
+		compatible = "sgm,sgm41542";
+		reg = <0x3B>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <12 0>;            //irq num base on hardware design
+		sgm,irq-gpio = <&tlmm 12 0>;     //irq num base on hardware design
+		sgm,chg-en-gpio = <&tlmm 92 0>;   //gpio num base on hardware design  1.MTK parent node name is pio  2.QUALCOMM parent node name is tlmm or other
+
+		/* sw jeita  parameter customer defined*/
+		enable_sw_jeita;
+		jeita_temp_above_t4_cv = <0>;
+		jeita_temp_t3_to_t4_cv = <4100000>;
+		jeita_temp_t2_to_t3_cv = <4350000>;
+		jeita_temp_t1_to_t2_cv = <4350000>;
+		jeita_temp_t0_to_t1_cv = <0>;
+		jeita_temp_below_t0_cv = <0>;
+
+		jeita_temp_above_t4_cc_current = <0>;
+		jeita_temp_t3_to_t4_cc_current = <1000000>;
+		jeita_temp_t2_to_t3_cc_current = <1250000>;
+		jeita_temp_t1_to_t2_cc_current = <1000000>;
+		jeita_temp_below_t0_cc_current = <0>;
+
+		temp_t4_thres = <50>;
+		temp_t4_thres_minus_x_degree = <48>;
+		temp_t3_thres = <45>;
+		temp_t3_thres_minus_x_degree = <45>;
+		temp_t2_thres = <20>;
+		temp_t2_thres_plus_x_degree = <15>;
+		temp_t1_thres = <0>;
+		temp_t1_thres_plus_x_degree = <0>;
+		temp_t0_thres = <0>;
+		temp_t0_thres_plus_x_degree = <2>;
+		temp_neg_10_thres = <0>;
+	};
+};