diff --git a/qcom/bangkk-sensors.dtsi b/qcom/bangkk-sensors.dtsi
index d0a4381a7db3..f6bf9c62b9f5 100755
--- a/qcom/bangkk-sensors.dtsi
+++ b/qcom/bangkk-sensors.dtsi
@@ -79,13 +79,14 @@
 	Semtech_sx937x@2c {
 			compatible = "Semtech,sx937x";
 			reg = <0x2c>;
-			Semtech,power-supply-type = <0>;
+			Semtech,power-supply-type = <1>;
 			cap_vdd-supply = <&L12A>;
 			pinctrl-names = "default","sleep";
 			pinctrl-0 = <&sar_int_bangkk_default>;
 			pinctrl-1 = <&sar_int_bangkk_sleep>;
 			interrupt-parent = <&tlmm>;
 			interrupts = <58 0x02>;
+			interrupt-names = "sx937x_irq";
 			Semtech,nirq-gpio = <&tlmm 58 0x02>;
 			/*use PH5/6 as the reference sensor
 			set it to 0xff if the ref-phases-x is not used*/
@@ -114,19 +115,19 @@
 				0x806C 0xFFF9EF
 				0x8078 0xFEF9FF
 				0x8084 0xFFFFFF
-				0x8098 0x9B8D
-				0x80B8 0x362D
-				0x80D8 0x5A4E
-				0x80F8 0xAD8D
-				0x8118 0x6E64
+				0x8098 0x6836
+				0x80B8 0x2019
+				0x80D8 0x4D40
+				0x80F8 0x5A23
+				0x8118 0x4637
 				0x8138 0xFF
 				0x8158 0xFF
 				0x8178 0xFF
-				0x80A0 0x0
+				0x80A0 0x20200001
 				0x80C0 0x0
-				0x80E0 0x0
+				0x80E0 0x20200001
 				0x8100 0x0
-				0x8120 0x0
+				0x8120 0x20200002
 				0x8140 0x0
 				0x8160 0x0
 				0x8180 0x0
@@ -134,11 +135,11 @@
 				0x818C 0x8000016
 				0x8190 0x0
 				0x8194 0x0
-				0x8090 0x54AC5300
-				0x80B0 0x54AC5300
-				0x80D0 0x54AC5300
-				0x80F0 0x54AC5300
-				0x8110 0x54AC5300
+				0x8090 0x7C845300
+				0x80B0 0x7C845300
+				0x80D0 0x7C845300
+				0x80F0 0x7C845300
+				0x8110 0x7C845300
 				0x8130 0x54AC5300
 				0x8150 0x54AC5300
 				0x8170 0x54AC5300
@@ -159,7 +160,7 @@
 				0x814C 0x60200031
 				0x816C 0x60200031
 				0x8024 0x7F7F
-				0x8274 0x08
+				0x8274 0x00
 				0x4280 0x0E
 			>;
 	};
@@ -169,13 +170,11 @@
 		reg = < 0x12 >;
 		//aw_sar,regulator-power-supply = <1>;
 		sar-num = < 0 >;
-		pinctrl-names = "default","sleep";
-		pinctrl-0 = <&sar_int_bangkk_default>;
-		pinctrl-1 = <&sar_int_bangkk_sleep>;
 		interrupt-parent = < &tlmm >;
 		interrupts = <58 0x02>;
+		interrupt-names = "awinic_irq";
 		irq-gpio = <&tlmm 58 0x02>;
-		cap_vdd-supply = <&L12A>;
+		//vcc0-supply = <&L12A>;
 		channel_use_flag = <0x1f>;
 		aw_sar,use_plug_cail;
 		aw_sar,update_fw;