net: use core MTU range checking in misc drivers

firewire-net:
- set min/max_mtu
- remove fwnet_change_mtu

nes:
- set max_mtu
- clean up nes_netdev_change_mtu

xpnet:
- set min/max_mtu
- remove xpnet_dev_change_mtu

hippi:
- set min/max_mtu
- remove hippi_change_mtu

batman-adv:
- set max_mtu
- remove batadv_interface_change_mtu
- initialization is a little async, not 100% certain that max_mtu is set
  in the optimal place, don't have hardware to test with

rionet:
- set min/max_mtu
- remove rionet_change_mtu

slip:
- set min/max_mtu
- streamline sl_change_mtu

um/net_kern:
- remove pointless ndo_change_mtu

hsi/clients/ssi_protocol:
- use core MTU range checking
- remove now redundant ssip_pn_set_mtu

ipoib:
- set a default max MTU value
- Note: ipoib's actual max MTU can vary, depending on if the device is in
  connected mode or not, so we'll just set the max_mtu value to the max
  possible, and let the ndo_change_mtu function continue to validate any new
  MTU change requests with checks for CM or not. Note that ipoib has no
  min_mtu set, and thus, the network core's mtu > 0 check is the only lower
  bounds here.

mptlan:
- use net core MTU range checking
- remove now redundant mpt_lan_change_mtu

fddi:
- min_mtu = 21, max_mtu = 4470
- remove now redundant fddi_change_mtu (including export)

fjes:
- min_mtu = 8192, max_mtu = 65536
- The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to
  get past the core net MTU range checks so fjes_change_mtu can validate a
  new MTU against what it supports (see fjes_support_mtu in fjes_hw.c)

hsr:
- min_mtu = 0 (calls ether_setup, max_mtu is 1500)

f_phonet:
- min_mtu = 6, max_mtu = 65541

u_ether:
- min_mtu = 14, max_mtu = 15412

phonet/pep-gprs:
- min_mtu = 576, max_mtu = 65530
- remove redundant gprs_set_mtu

CC: [email protected]
CC: [email protected]
CC: Stefan Richter <[email protected]>
CC: Faisal Latif <[email protected]>
CC: [email protected]
CC: Cliff Whickman <[email protected]>
CC: Robin Holt <[email protected]>
CC: Jes Sorensen <[email protected]>
CC: Marek Lindner <[email protected]>
CC: Simon Wunderlich <[email protected]>
CC: Antonio Quartulli <[email protected]>
CC: Sathya Prakash <[email protected]>
CC: Chaitra P B <[email protected]>
CC: Suganath Prabu Subramani <[email protected]>
CC: [email protected]
CC: Sebastian Reichel <[email protected]>
CC: Felipe Balbi <[email protected]>
CC: Arvid Brodin <[email protected]>
CC: Remi Denis-Courmont <[email protected]>
Signed-off-by: Jarod Wilson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

drivers/usb/gadget/function/f_phonet.c

@@ -261,19 +261,10 @@ out:
 	return NETDEV_TX_OK;
 }
 
-static int pn_net_mtu(struct net_device *dev, int new_mtu)
-{
-	if ((new_mtu < PHONET_MIN_MTU) || (new_mtu > PHONET_MAX_MTU))
-		return -EINVAL;
-	dev->mtu = new_mtu;
-	return 0;
-}
-
 static const struct net_device_ops pn_netdev_ops = {
 	.ndo_open	= pn_net_open,
 	.ndo_stop	= pn_net_close,
 	.ndo_start_xmit	= pn_net_xmit,
-	.ndo_change_mtu	= pn_net_mtu,
 };
 
 static void pn_net_setup(struct net_device *dev)
@@ -282,6 +273,8 @@ static void pn_net_setup(struct net_device *dev)
 	dev->type		= ARPHRD_PHONET;
 	dev->flags		= IFF_POINTOPOINT | IFF_NOARP;
 	dev->mtu		= PHONET_DEV_MTU;
+	dev->min_mtu		= PHONET_MIN_MTU;
+	dev->max_mtu		= PHONET_MAX_MTU;
 	dev->hard_header_len	= 1;
 	dev->dev_addr[0]	= PN_MEDIA_USB;
 	dev->addr_len		= 1;

drivers/usb/gadget/function/u_ether.c

@@ -142,15 +142,6 @@ static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
 
 /* NETWORK DRIVER HOOKUP (to the layer above this driver) */
 
-static int ueth_change_mtu(struct net_device *net, int new_mtu)
-{
-	if (new_mtu <= ETH_HLEN || new_mtu > GETHER_MAX_ETH_FRAME_LEN)
-		return -ERANGE;
-	net->mtu = new_mtu;
-
-	return 0;
-}
-
 static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
 {
 	struct eth_dev *dev = netdev_priv(net);
@@ -736,7 +727,6 @@ static const struct net_device_ops eth_netdev_ops = {
 	.ndo_open		= eth_open,
 	.ndo_stop		= eth_stop,
 	.ndo_start_xmit		= eth_start_xmit,
-	.ndo_change_mtu		= ueth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 };
@@ -799,6 +789,10 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g,
 
 	net->ethtool_ops = &ops;
 
+	/* MTU range: 14 - 15412 */
+	net->min_mtu = ETH_HLEN;
+	net->max_mtu = GETHER_MAX_ETH_FRAME_LEN;
+
 	dev->gadget = g;
 	SET_NETDEV_DEV(net, &g->dev);
 	SET_NETDEV_DEVTYPE(net, &gadget_type);