net: use core MTU range checking in misc drivers

firewire-net:
- set min/max_mtu
- remove fwnet_change_mtu

nes:
- set max_mtu
- clean up nes_netdev_change_mtu

xpnet:
- set min/max_mtu
- remove xpnet_dev_change_mtu

hippi:
- set min/max_mtu
- remove hippi_change_mtu

batman-adv:
- set max_mtu
- remove batadv_interface_change_mtu
- initialization is a little async, not 100% certain that max_mtu is set
  in the optimal place, don't have hardware to test with

rionet:
- set min/max_mtu
- remove rionet_change_mtu

slip:
- set min/max_mtu
- streamline sl_change_mtu

um/net_kern:
- remove pointless ndo_change_mtu

hsi/clients/ssi_protocol:
- use core MTU range checking
- remove now redundant ssip_pn_set_mtu

ipoib:
- set a default max MTU value
- Note: ipoib's actual max MTU can vary, depending on if the device is in
  connected mode or not, so we'll just set the max_mtu value to the max
  possible, and let the ndo_change_mtu function continue to validate any new
  MTU change requests with checks for CM or not. Note that ipoib has no
  min_mtu set, and thus, the network core's mtu > 0 check is the only lower
  bounds here.

mptlan:
- use net core MTU range checking
- remove now redundant mpt_lan_change_mtu

fddi:
- min_mtu = 21, max_mtu = 4470
- remove now redundant fddi_change_mtu (including export)

fjes:
- min_mtu = 8192, max_mtu = 65536
- The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to
  get past the core net MTU range checks so fjes_change_mtu can validate a
  new MTU against what it supports (see fjes_support_mtu in fjes_hw.c)

hsr:
- min_mtu = 0 (calls ether_setup, max_mtu is 1500)

f_phonet:
- min_mtu = 6, max_mtu = 65541

u_ether:
- min_mtu = 14, max_mtu = 15412

phonet/pep-gprs:
- min_mtu = 576, max_mtu = 65530
- remove redundant gprs_set_mtu

CC: [email protected]
CC: [email protected]
CC: Stefan Richter <[email protected]>
CC: Faisal Latif <[email protected]>
CC: [email protected]
CC: Cliff Whickman <[email protected]>
CC: Robin Holt <[email protected]>
CC: Jes Sorensen <[email protected]>
CC: Marek Lindner <[email protected]>
CC: Simon Wunderlich <[email protected]>
CC: Antonio Quartulli <[email protected]>
CC: Sathya Prakash <[email protected]>
CC: Chaitra P B <[email protected]>
CC: Suganath Prabu Subramani <[email protected]>
CC: [email protected]
CC: Sebastian Reichel <[email protected]>
CC: Felipe Balbi <[email protected]>
CC: Arvid Brodin <[email protected]>
CC: Remi Denis-Courmont <[email protected]>
Signed-off-by: Jarod Wilson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

net/802/fddi.c

@@ -141,15 +141,6 @@ __be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev)
 
 EXPORT_SYMBOL(fddi_type_trans);
 
-int fddi_change_mtu(struct net_device *dev, int new_mtu)
-{
-	if ((new_mtu < FDDI_K_SNAP_HLEN) || (new_mtu > FDDI_K_SNAP_DLEN))
-		return -EINVAL;
-	dev->mtu = new_mtu;
-	return 0;
-}
-EXPORT_SYMBOL(fddi_change_mtu);
-
 static const struct header_ops fddi_header_ops = {
 	.create		= fddi_header,
 };
@@ -161,6 +152,8 @@ static void fddi_setup(struct net_device *dev)
 	dev->type		= ARPHRD_FDDI;
 	dev->hard_header_len	= FDDI_K_SNAP_HLEN+3;	/* Assume 802.2 SNAP hdr len + 3 pad bytes */
 	dev->mtu		= FDDI_K_SNAP_DLEN;	/* Assume max payload of 802.2 SNAP frame */
+	dev->min_mtu		= FDDI_K_SNAP_HLEN;
+	dev->max_mtu		= FDDI_K_SNAP_DLEN;
 	dev->addr_len		= FDDI_K_ALEN;
 	dev->tx_queue_len	= 100;			/* Long queues on FDDI */
 	dev->flags		= IFF_BROADCAST | IFF_MULTICAST;

net/802/hippi.c

@@ -116,18 +116,6 @@ __be16 hippi_type_trans(struct sk_buff *skb, struct net_device *dev)
 
 EXPORT_SYMBOL(hippi_type_trans);
 
-int hippi_change_mtu(struct net_device *dev, int new_mtu)
-{
-	/*
-	 * HIPPI's got these nice large MTUs.
-	 */
-	if ((new_mtu < 68) || (new_mtu > 65280))
-		return -EINVAL;
-	dev->mtu = new_mtu;
-	return 0;
-}
-EXPORT_SYMBOL(hippi_change_mtu);
-
 /*
  * For HIPPI we will actually use the lower 4 bytes of the hardware
  * address as the I-FIELD rather than the actual hardware address.
@@ -174,6 +162,8 @@ static void hippi_setup(struct net_device *dev)
 	dev->type		= ARPHRD_HIPPI;
 	dev->hard_header_len 	= HIPPI_HLEN;
 	dev->mtu		= 65280;
+	dev->min_mtu		= 68;
+	dev->max_mtu		= 65280;
 	dev->addr_len		= HIPPI_ALEN;
 	dev->tx_queue_len	= 25 /* 5 */;
 	memset(dev->broadcast, 0xFF, HIPPI_ALEN);