Merge remote-tracking branch 'spi/topic/rspi' into spi-pdata

Conflicts:
	drivers/spi/spi-rspi.c

drivers/spi/spi-altera.c

@@ -103,6 +103,16 @@ static void altera_spi_chipsel(struct spi_device *spi, int value)
 	}
 }
 
+static int altera_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	return 0;
+}
+
+static int altera_spi_setup(struct spi_device *spi)
+{
+	return 0;
+}
+
 static inline unsigned int hw_txbyte(struct altera_spi *hw, int count)
 {
 	if (hw->tx) {
@@ -221,6 +231,7 @@ static int altera_spi_probe(struct platform_device *pdev)
 	master->bus_num = pdev->id;
 	master->num_chipselect = 16;
 	master->mode_bits = SPI_CS_HIGH;
+	master->setup = altera_spi_setup;
 
 	hw = spi_master_get_devdata(master);
 	platform_set_drvdata(pdev, hw);
@@ -229,6 +240,7 @@ static int altera_spi_probe(struct platform_device *pdev)
 	hw->bitbang.master = spi_master_get(master);
 	if (!hw->bitbang.master)
 		return err;
+	hw->bitbang.setup_transfer = altera_spi_setupxfer;
 	hw->bitbang.chipselect = altera_spi_chipsel;
 	hw->bitbang.txrx_bufs = altera_spi_txrx;
 

drivers/spi/spi-nuc900.c

@@ -174,6 +174,17 @@ static void nuc900_spi_gobusy(struct nuc900_spi *hw)
 	spin_unlock_irqrestore(&hw->lock, flags);
 }
 
+static int nuc900_spi_setupxfer(struct spi_device *spi,
+				 struct spi_transfer *t)
+{
+	return 0;
+}
+
+static int nuc900_spi_setup(struct spi_device *spi)
+{
+	return 0;
+}
+
 static inline unsigned int hw_txbyte(struct nuc900_spi *hw, int count)
 {
 	return hw->tx ? hw->tx[count] : 0;
@@ -366,8 +377,10 @@ static int nuc900_spi_probe(struct platform_device *pdev)
 	master->num_chipselect     = hw->pdata->num_cs;
 	master->bus_num            = hw->pdata->bus_num;
 	hw->bitbang.master         = hw->master;
+	hw->bitbang.setup_transfer = nuc900_spi_setupxfer;
 	hw->bitbang.chipselect     = nuc900_spi_chipsel;
 	hw->bitbang.txrx_bufs      = nuc900_spi_txrx;
+	hw->bitbang.master->setup  = nuc900_spi_setup;
 
 	hw->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (hw->res == NULL) {

drivers/spi/spi-rspi.c

@@ -564,8 +564,12 @@ static void rspi_work(struct work_struct *work)
 	unsigned long flags;
 	int ret;
 
-	spin_lock_irqsave(&rspi->lock, flags);
-	while (!list_empty(&rspi->queue)) {
+	while (1) {
+		spin_lock_irqsave(&rspi->lock, flags);
+		if (list_empty(&rspi->queue)) {
+			spin_unlock_irqrestore(&rspi->lock, flags);
+			break;
+		}
 		mesg = list_entry(rspi->queue.next, struct spi_message, queue);
 		list_del_init(&mesg->queue);
 		spin_unlock_irqrestore(&rspi->lock, flags);
@@ -595,8 +599,6 @@ static void rspi_work(struct work_struct *work)
 
 		mesg->status = 0;
 		mesg->complete(mesg->context);
-
-		spin_lock_irqsave(&rspi->lock, flags);
 	}
 
 	return;
@@ -665,11 +667,12 @@ static int rspi_request_dma(struct rspi_data *rspi,
 				      struct platform_device *pdev)
 {
 	struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dma_cap_mask_t mask;
 	struct dma_slave_config cfg;
 	int ret;
 
-	if (!rspi_pd)
+	if (!res || !rspi_pd)
 		return 0;	/* The driver assumes no error. */
 
 	rspi->dma_width_16bit = rspi_pd->dma_width_16bit;
@@ -683,6 +686,8 @@ static int rspi_request_dma(struct rspi_data *rspi,
 		if (rspi->chan_rx) {
 			cfg.slave_id = rspi_pd->dma_rx_id;
 			cfg.direction = DMA_DEV_TO_MEM;
+			cfg.dst_addr = 0;
+			cfg.src_addr = res->start + RSPI_SPDR;
 			ret = dmaengine_slave_config(rspi->chan_rx, &cfg);
 			if (!ret)
 				dev_info(&pdev->dev, "Use DMA when rx.\n");
@@ -698,6 +703,8 @@ static int rspi_request_dma(struct rspi_data *rspi,
 		if (rspi->chan_tx) {
 			cfg.slave_id = rspi_pd->dma_tx_id;
 			cfg.direction = DMA_MEM_TO_DEV;
+			cfg.dst_addr = res->start + RSPI_SPDR;
+			cfg.src_addr = 0;
 			ret = dmaengine_slave_config(rspi->chan_tx, &cfg);
 			if (!ret)
 				dev_info(&pdev->dev, "Use DMA when tx\n");

drivers/spi/spi-s3c64xx.c

@@ -434,6 +434,9 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
 	dma_cap_mask_t mask;
 	int ret;
 
+	if (is_polling(sdd))
+		return 0;
+
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 

drivers/spi/spi-xilinx.c

@@ -232,6 +232,21 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
 	return 0;
 }
 
+static int xilinx_spi_setup(struct spi_device *spi)
+{
+	/* always return 0, we can not check the number of bits.
+	 * There are cases when SPI setup is called before any driver is
+	 * there, in that case the SPI core defaults to 8 bits, which we
+	 * do not support in some cases. But if we return an error, the
+	 * SPI device would not be registered and no driver can get hold of it
+	 * When the driver is there, it will call SPI setup again with the
+	 * correct number of bits per transfer.
+	 * If a driver setups with the wrong bit number, it will fail when
+	 * it tries to do a transfer
+	 */
+	return 0;
+}
+
 static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi)
 {
 	u8 sr;
@@ -376,6 +391,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
 	xspi->bitbang.chipselect = xilinx_spi_chipselect;
 	xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
 	xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
+	xspi->bitbang.master->setup = xilinx_spi_setup;
 	init_completion(&xspi->done);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);