This is the bulk of pin control changes for the v4.15

kernel cycle:
 
 Core:
 
 - The pin control Kconfig entry PINCTRL is now turned into
   a menuconfig option. This obviously has the implication of
   making the subsystem menu visible in menuconfig. This is
   happening because of two things:
 
   - Intel have started to deploy and depend on pin controllers
     in a way that is affecting users directly. This happens
     on the highly integrated laptop chipsets named after
     geographical places: baytrail, broxton, cannonlake,
     cedarfork, cherryview, denverton, geminilake, lewisburg,
     merrifield, sunrisepoint... It started a while back and
     now it is ever more evident that this is crucial
     infrastructure for x86 laptops and not an embedded
     obscurity anymore. Users need to be aware.
 
   - Pin control expanders on I2C and SPI that are
     arch-agnostic. Currently Semtech SX150X and Microchip
     MCP28x08 but more are expected. Users will have to be
     able to configure these in directly for their set-up.
 
 - Just go and select GPIOLIB now that we made sure that
   GPIOLIB is a very vanilla subsystem. Do not depend on
   it, if we need it, select it.
 
 - Exposing the pin control subsystem in menuconfig uncovered
   a bunch of obscure bugs that are now hopefully fixed,
   all more or less pertaining to Blackfin.
 
 - Unified namespace for cross-calls between pin control and
   GPIO.
 
 - New support for clock skew/delay generic DT bindings
   and generic pin config options for this.
 
 - Minor documentation improvements.
 
 Various:
 
 - The Renesas SH-PFC pin controller has evolved a lot. It seems
   Renesas are churning out new SoCs by the minute.
 
 - A bunch of non-critical fixes for the Rockchip driver.
 
 - Improve the use of library functions instead of open coding.
 
 - Support the MCP28018 variant in the MCP28x08 driver.
 
 - Static constifying.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaDV9TAAoJEEEQszewGV1zf0AQAIlHxM8B0mJPOFv7WdPIHs8j
 GSGAPv0rPobdgZI8vegosIQmAiry5jjaHP6VGOrK5n8FRxfBLd89NLT7dgK7J9Yx
 tYcQRQn1/MqZKaIjWWgTes3okEr9s77Of3aWkA9gyvBjTGoo2hu8BTwZOYuPrIPP
 aYcI7VR0VbTe7FQR1QRtKBXnBTXfznF1j5ckKNY4ahgIPcUgxyh6EA1E61rDorLK
 gvwwzoBqIKQAcnapgarF7YOJjoE0i7ZoSlhL0b0nvhcgolyK/zLN4xujLcTGPeTJ
 hQwe7LhxtvtmJmu0jRMuetDLFT52d6eq8ttyFBMULkgRzcgMv6GZZXUy4k92t7ZT
 F2DRbAjyAlxkhUhQ8BORzEXwfWYITt1M49jWQqugdDR2fV/MAlF8motOkVBl73iS
 zHIQ/ZDcAD+PlwTHiDyDOUxj7qyDs2MkTLTzfXc0koOQZOqskDHQ1dIf3UzLzZ9S
 /dx339/ejwP73E0lzOsanhianfonqWZ3Apn3aRG18uqCt2+eHySWpxyRANuOlBZI
 czERg+47wDfng24xyuH0EElgbS5G0Bt1lT5zLVLdFEvoLmcBHVKqaCkiuvYXOjVM
 GyMRvQPiJbhT6qiJ+aSP8t/utl1aUhXQLtrUnXxu8qv9tQ6jgmqiQd9855Uvrzb0
 ZR2wyNc2jtWzwCfrkWjt
 =kj/b
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.15 kernel cycle:

  Core:

   - The pin control Kconfig entry PINCTRL is now turned into a
     menuconfig option. This obviously has the implication of making the
     subsystem menu visible in menuconfig. This is happening because of
     two things:

      (a) Intel have started to deploy and depend on pin controllers in
          a way that is affecting users directly. This happens on the
          highly integrated laptop chipsets named after geographical
          places: baytrail, broxton, cannonlake, cedarfork, cherryview,
          denverton, geminilake, lewisburg, merrifield, sunrisepoint...
          It started a while back and now it is ever more evident that
          this is crucial infrastructure for x86 laptops and not an
          embedded obscurity anymore. Users need to be aware.

      (b) Pin control expanders on I2C and SPI that are arch-agnostic.
          Currently Semtech SX150X and Microchip MCP28x08 but more are
          expected. Users will have to be able to configure these in
          directly for their set-up.

   - Just go and select GPIOLIB now that we made sure that GPIOLIB is a
     very vanilla subsystem. Do not depend on it, if we need it, select
     it.

   - Exposing the pin control subsystem in menuconfig uncovered a bunch
     of obscure bugs that are now hopefully fixed, all more or less
     pertaining to Blackfin.

   - Unified namespace for cross-calls between pin control and GPIO.

   - New support for clock skew/delay generic DT bindings and generic
     pin config options for this.

   - Minor documentation improvements.

  Various:

   - The Renesas SH-PFC pin controller has evolved a lot. It seems
     Renesas are churning out new SoCs by the minute.

   - A bunch of non-critical fixes for the Rockchip driver.

   - Improve the use of library functions instead of open coding.

   - Support the MCP28018 variant in the MCP28x08 driver.

   - Static constifying"

* tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits)
  pinctrl: gemini: Fix missing pad descriptions
  pinctrl: Add some depends on HAS_IOMEM
  pinctrl: samsung/s3c24xx: add CONFIG_OF dependency
  pinctrl: gemini: Fix GMAC groups
  pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support
  pinctrl: ti-iodelay: remove redundant unused variable dev
  pinctrl: max77620: Use common error handling code in max77620_pinconf_set()
  pinctrl: gemini: Implement clock skew/delay config
  pinctrl: gemini: Use generic DT parser
  pinctrl: Add skew-delay pin config and bindings
  pinctrl: armada-37xx: Add edge both type gpio irq support
  pinctrl: uniphier: remove eMMC hardware reset pin-mux
  pinctrl: rockchip: Add iomux-route switching support for rk3288
  pinctrl: intel: Add Intel Cedar Fork PCH pin controller support
  pinctrl: intel: Make offset to interrupt status register configurable
  pinctrl: sunxi: Enforce the strict mode by default
  pinctrl: sunxi: Disable strict mode for old pinctrl drivers
  pinctrl: sunxi: Introduce the strict flag
  pinctrl: sh-pfc: Save/restore registers for PSCI system suspend
  pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description
  ...

drivers/gpio/Kconfig

@@ -834,15 +834,6 @@ config GPIO_PCF857X
 	  This driver provides an in-kernel interface to those GPIOs using
 	  platform-neutral GPIO calls.
 
-config GPIO_SX150X
-	bool "Semtech SX150x I2C GPIO expander (deprecated)"
-	depends on PINCTRL && I2C=y
-	select PINCTRL_SX150X
-	default n
-	help
-	  Say yes here to provide support for Semtech SX150x-series I2C
-	  GPIO expanders. The GPIO driver was replaced by a Pinctrl version.
-
 config GPIO_TPIC2810
 	tristate "TPIC2810 8-Bit I2C GPO expander"
 	help

drivers/gpio/gpio-aspeed.c

@@ -539,12 +539,12 @@ static int aspeed_gpio_request(struct gpio_chip *chip, unsigned int offset)
 	if (!have_gpio(gpiochip_get_data(chip), offset))
 		return -ENODEV;
 
-	return pinctrl_request_gpio(chip->base + offset);
+	return pinctrl_gpio_request(chip->base + offset);
 }
 
 static void aspeed_gpio_free(struct gpio_chip *chip, unsigned int offset)
 {
-	pinctrl_free_gpio(chip->base + offset);
+	pinctrl_gpio_free(chip->base + offset);
 }
 
 static inline void __iomem *bank_debounce_reg(struct aspeed_gpio *gpio,

drivers/gpio/gpio-em.c

@@ -239,12 +239,12 @@ static int em_gio_to_irq(struct gpio_chip *chip, unsigned offset)
 
 static int em_gio_request(struct gpio_chip *chip, unsigned offset)
 {
-	return pinctrl_request_gpio(chip->base + offset);
+	return pinctrl_gpio_request(chip->base + offset);
 }
 
 static void em_gio_free(struct gpio_chip *chip, unsigned offset)
 {
-	pinctrl_free_gpio(chip->base + offset);
+	pinctrl_gpio_free(chip->base + offset);
 
 	/* Set the GPIO as an input to ensure that the next GPIO request won't
 	* drive the GPIO pin as an output.

drivers/gpio/gpio-pxa.c

@@ -330,16 +330,6 @@ static int pxa_gpio_of_xlate(struct gpio_chip *gc,
 }
 #endif
 
-static int pxa_gpio_request(struct gpio_chip *chip, unsigned int offset)
-{
-	return pinctrl_request_gpio(chip->base + offset);
-}
-
-static void pxa_gpio_free(struct gpio_chip *chip, unsigned int offset)
-{
-	pinctrl_free_gpio(chip->base + offset);
-}
-
 static int pxa_init_gpio_chip(struct pxa_gpio_chip *pchip, int ngpio,
 			      struct device_node *np, void __iomem *regbase)
 {
@@ -358,8 +348,8 @@ static int pxa_init_gpio_chip(struct pxa_gpio_chip *pchip, int ngpio,
 	pchip->chip.set = pxa_gpio_set;
 	pchip->chip.to_irq = pxa_gpio_to_irq;
 	pchip->chip.ngpio = ngpio;
-	pchip->chip.request = pxa_gpio_request;
-	pchip->chip.free = pxa_gpio_free;
+	pchip->chip.request = gpiochip_generic_request;
+	pchip->chip.free = gpiochip_generic_free;
 #ifdef CONFIG_OF_GPIO
 	pchip->chip.of_node = np;
 	pchip->chip.of_xlate = pxa_gpio_of_xlate;

drivers/gpio/gpio-rcar.c

@@ -250,7 +250,7 @@ static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset)
 	if (error < 0)
 		return error;
 
-	error = pinctrl_request_gpio(chip->base + offset);
+	error = pinctrl_gpio_request(chip->base + offset);
 	if (error)
 		pm_runtime_put(&p->pdev->dev);
 
@@ -261,7 +261,7 @@ static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset)
 {
 	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
 
-	pinctrl_free_gpio(chip->base + offset);
+	pinctrl_gpio_free(chip->base + offset);
 
 	/*
 	 * Set the GPIO as an input to ensure that the next GPIO request won't

drivers/gpio/gpio-tegra.c

@@ -141,14 +141,14 @@ static void tegra_gpio_disable(struct tegra_gpio_info *tgi, unsigned int gpio)
 
 static int tegra_gpio_request(struct gpio_chip *chip, unsigned int offset)
 {
-	return pinctrl_request_gpio(offset);
+	return pinctrl_gpio_request(offset);
 }
 
 static void tegra_gpio_free(struct gpio_chip *chip, unsigned int offset)
 {
 	struct tegra_gpio_info *tgi = gpiochip_get_data(chip);
 
-	pinctrl_free_gpio(offset);
+	pinctrl_gpio_free(offset);
 	tegra_gpio_disable(tgi, offset);
 }
 

drivers/gpio/gpio-tz1090.c

@@ -232,7 +232,7 @@ static int tz1090_gpio_request(struct gpio_chip *chip, unsigned int offset)
 	struct tz1090_gpio_bank *bank = gpiochip_get_data(chip);
 	int ret;
 
-	ret = pinctrl_request_gpio(chip->base + offset);
+	ret = pinctrl_gpio_request(chip->base + offset);
 	if (ret)
 		return ret;
 
@@ -246,7 +246,7 @@ static void tz1090_gpio_free(struct gpio_chip *chip, unsigned int offset)
 {
 	struct tz1090_gpio_bank *bank = gpiochip_get_data(chip);
 
-	pinctrl_free_gpio(chip->base + offset);
+	pinctrl_gpio_free(chip->base + offset);
 
 	tz1090_gpio_clear_bit(bank, REG_GPIO_BIT_EN, offset);
 }

drivers/gpio/gpiolib.c

@@ -1962,7 +1962,7 @@ static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip)
  */
 int gpiochip_generic_request(struct gpio_chip *chip, unsigned offset)
 {
-	return pinctrl_request_gpio(chip->gpiodev->base + offset);
+	return pinctrl_gpio_request(chip->gpiodev->base + offset);
 }
 EXPORT_SYMBOL_GPL(gpiochip_generic_request);
 
@@ -1973,7 +1973,7 @@ EXPORT_SYMBOL_GPL(gpiochip_generic_request);
  */
 void gpiochip_generic_free(struct gpio_chip *chip, unsigned offset)
 {
-	pinctrl_free_gpio(chip->gpiodev->base + offset);
+	pinctrl_gpio_free(chip->gpiodev->base + offset);
 }
 EXPORT_SYMBOL_GPL(gpiochip_generic_free);