Merge commit 'fe5fa8fbd4d47f40a45fa29ee1abdb10cb061ec2' into clk-next

drivers/clk/Kconfig

@@ -116,6 +116,12 @@ config COMMON_CLK_CDCE925
 	  Given a target output frequency, the driver will set the PLL and
 	  divider to best approximate the desired output.
 
+config COMMON_CLK_CS2000_CP
+	tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier"
+	depends on I2C
+	help
+	  If you say yes here you get support for the CS2000 clock multiplier.
+
 config COMMON_CLK_S2MPS11
 	tristate "Clock driver for S2MPS1X/S5M8767 MFD"
 	depends on MFD_SEC_CORE

drivers/clk/Makefile

@@ -21,6 +21,7 @@ obj-$(CONFIG_MACH_ASM9260)		+= clk-asm9260.o
 obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)	+= clk-axi-clkgen.o
 obj-$(CONFIG_ARCH_AXXIA)		+= clk-axm5516.o
 obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
+obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
@@ -42,6 +43,7 @@ obj-$(CONFIG_COMMON_CLK_SI514)		+= clk-si514.o
 obj-$(CONFIG_COMMON_CLK_SI570)		+= clk-si570.o
 obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_STM32)		+= clk-stm32f4.o
+obj-$(CONFIG_ARCH_TANGOX)		+= clk-tango4.o
 obj-$(CONFIG_CLK_TWL6040)		+= clk-twl6040.o
 obj-$(CONFIG_ARCH_U300)			+= clk-u300.o
 obj-$(CONFIG_ARCH_VT8500)		+= clk-vt8500.o
@@ -69,6 +71,7 @@ obj-$(CONFIG_COMMON_CLK_QCOM)		+= qcom/
 obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
 obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
 obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= shmobile/
+obj-$(CONFIG_ARCH_RENESAS)		+= shmobile/
 obj-$(CONFIG_ARCH_SIRF)			+= sirf/
 obj-$(CONFIG_ARCH_SOCFPGA)		+= socfpga/
 obj-$(CONFIG_PLAT_SPEAR)		+= spear/

drivers/clk/at91/clk-slow.c

@@ -10,7 +10,6 @@
  *
  */
 
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/slab.h>
@@ -72,8 +71,6 @@ struct clk_sam9x5_slow {
 
 #define to_clk_sam9x5_slow(hw) container_of(hw, struct clk_sam9x5_slow, hw)
 
-static struct clk *slow_clk;
-
 static int clk_slow_osc_prepare(struct clk_hw *hw)
 {
 	struct clk_slow_osc *osc = to_clk_slow_osc(hw);
@@ -360,8 +357,6 @@ at91_clk_register_sam9x5_slow(void __iomem *sckcr,
 	clk = clk_register(NULL, &slowck->hw);
 	if (IS_ERR(clk))
 		kfree(slowck);
-	else
-		slow_clk = clk;
 
 	return clk;
 }
@@ -433,8 +428,6 @@ at91_clk_register_sam9260_slow(struct at91_pmc *pmc,
 	clk = clk_register(NULL, &slowck->hw);
 	if (IS_ERR(clk))
 		kfree(slowck);
-	else
-		slow_clk = clk;
 
 	return clk;
 }
@@ -462,25 +455,3 @@ void __init of_at91sam9260_clk_slow_setup(struct device_node *np,
 
 	of_clk_add_provider(np, of_clk_src_simple_get, clk);
 }
-
-/*
- * FIXME: All slow clk users are not properly claiming it (get + prepare +
- * enable) before using it.
- * If all users properly claiming this clock decide that they don't need it
- * anymore (or are removed), it is disabled while faulty users are still
- * requiring it, and the system hangs.
- * Prevent this clock from being disabled until all users are properly
- * requesting it.
- * Once this is done we should remove this function and the slow_clk variable.
- */
-static int __init of_at91_clk_slow_retain(void)
-{
-	if (!slow_clk)
-		return 0;
-
-	__clk_get(slow_clk);
-	clk_prepare_enable(slow_clk);
-
-	return 0;
-}
-arch_initcall(of_at91_clk_slow_retain);

drivers/clk/bcm/Kconfig

@@ -1,3 +1,13 @@
+config CLK_BCM_63XX
+	bool "Broadcom BCM63xx clock support"
+	depends on ARCH_BCM_63XX || COMPILE_TEST
+	depends on COMMON_CLK
+	select COMMON_CLK_IPROC
+	default ARCH_BCM_63XX
+	help
+	  Enable common clock framework support for Broadcom BCM63xx DSL SoCs
+	  based on the ARM architecture
+
 config CLK_BCM_KONA
 	bool "Broadcom Kona CCU clock support"
 	depends on ARCH_BCM_MOBILE || COMPILE_TEST

drivers/clk/bcm/Makefile

@@ -1,3 +1,4 @@
+obj-$(CONFIG_CLK_BCM_63XX)	+= clk-bcm63xx.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona-setup.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o

drivers/clk/bcm/clk-bcm63xx.c

@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include "clk-iproc.h"
+
+static void __init bcm63138_armpll_init(struct device_node *node)
+{
+	iproc_armpll_setup(node);
+}
+CLK_OF_DECLARE(bcm63138_armpll, "brcm,bcm63138-armpll", bcm63138_armpll_init);

drivers/clk/clk-cs2000-cp.c

@@ -0,0 +1,510 @@
+/*
+ * CS2000  --  CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+
+#define CH_MAX 4
+#define RATIO_REG_SIZE 4
+
+#define DEVICE_ID	0x1
+#define DEVICE_CTRL	0x2
+#define DEVICE_CFG1	0x3
+#define DEVICE_CFG2	0x4
+#define GLOBAL_CFG	0x5
+#define Ratio_Add(x, nth)	(6 + (x * 4) + (nth))
+#define Ratio_Val(x, nth)	((x >> (24 - (8 * nth))) & 0xFF)
+#define Val_Ratio(x, nth)	((x & 0xFF) << (24 - (8 * nth)))
+#define FUNC_CFG1	0x16
+#define FUNC_CFG2	0x17
+
+/* DEVICE_ID */
+#define REVISION_MASK	(0x7)
+#define REVISION_B2_B3	(0x4)
+#define REVISION_C1	(0x6)
+
+/* DEVICE_CTRL */
+#define PLL_UNLOCK	(1 << 7)
+
+/* DEVICE_CFG1 */
+#define RSEL(x)		(((x) & 0x3) << 3)
+#define RSEL_MASK	RSEL(0x3)
+#define ENDEV1		(0x1)
+
+/* GLOBAL_CFG */
+#define ENDEV2		(0x1)
+
+#define CH_SIZE_ERR(ch)		((ch < 0) || (ch >= CH_MAX))
+#define hw_to_priv(_hw)		container_of(_hw, struct cs2000_priv, hw)
+#define priv_to_client(priv)	(priv->client)
+#define priv_to_dev(priv)	(&(priv_to_client(priv)->dev))
+
+#define CLK_IN	0
+#define REF_CLK	1
+#define CLK_MAX 2
+
+struct cs2000_priv {
+	struct clk_hw hw;
+	struct i2c_client *client;
+	struct clk *clk_in;
+	struct clk *ref_clk;
+	struct clk *clk_out;
+};
+
+static const struct of_device_id cs2000_of_match[] = {
+	{ .compatible = "cirrus,cs2000-cp", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cs2000_of_match);
+
+static const struct i2c_device_id cs2000_id[] = {
+	{ "cs2000-cp", },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, cs2000_id);
+
+#define cs2000_read(priv, addr) \
+	i2c_smbus_read_byte_data(priv_to_client(priv), addr)
+#define cs2000_write(priv, addr, val) \
+	i2c_smbus_write_byte_data(priv_to_client(priv), addr, val)
+
+static int cs2000_bset(struct cs2000_priv *priv, u8 addr, u8 mask, u8 val)
+{
+	s32 data;
+
+	data = cs2000_read(priv, addr);
+	if (data < 0)
+		return data;
+
+	data &= ~mask;
+	data |= (val & mask);
+
+	return cs2000_write(priv, addr, data);
+}
+
+static int cs2000_enable_dev_config(struct cs2000_priv *priv, bool enable)
+{
+	int ret;
+
+	ret = cs2000_bset(priv, DEVICE_CFG1, ENDEV1,
+			  enable ? ENDEV1 : 0);
+	if (ret < 0)
+		return ret;
+
+	ret = cs2000_bset(priv, GLOBAL_CFG,  ENDEV2,
+			  enable ? ENDEV2 : 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int cs2000_clk_in_bound_rate(struct cs2000_priv *priv,
+				    u32 rate_in)
+{
+	u32 val;
+
+	if (rate_in >= 32000000 && rate_in < 56000000)
+		val = 0x0;
+	else if (rate_in >= 16000000 && rate_in < 28000000)
+		val = 0x1;
+	else if (rate_in >= 8000000 && rate_in < 14000000)
+		val = 0x2;
+	else
+		return -EINVAL;
+
+	return cs2000_bset(priv, FUNC_CFG1, 0x3 << 3, val << 3);
+}
+
+static int cs2000_wait_pll_lock(struct cs2000_priv *priv)
+{
+	struct device *dev = priv_to_dev(priv);
+	s32 val;
+	unsigned int i;
+
+	for (i = 0; i < 256; i++) {
+		val = cs2000_read(priv, DEVICE_CTRL);
+		if (val < 0)
+			return val;
+		if (!(val & PLL_UNLOCK))
+			return 0;
+		udelay(1);
+	}
+
+	dev_err(dev, "pll lock failed\n");
+
+	return -ETIMEDOUT;
+}
+
+static int cs2000_clk_out_enable(struct cs2000_priv *priv, bool enable)
+{
+	/* enable both AUX_OUT, CLK_OUT */
+	return cs2000_write(priv, DEVICE_CTRL, enable ? 0 : 0x3);
+}
+
+static u32 cs2000_rate_to_ratio(u32 rate_in, u32 rate_out)
+{
+	u64 ratio;
+
+	/*
+	 * ratio = rate_out / rate_in * 2^20
+	 *
+	 * To avoid over flow, rate_out is u64.
+	 * The result should be u32.
+	 */
+	ratio = (u64)rate_out << 20;
+	do_div(ratio, rate_in);
+
+	return ratio;
+}
+
+static unsigned long cs2000_ratio_to_rate(u32 ratio, u32 rate_in)
+{
+	u64 rate_out;
+
+	/*
+	 * ratio = rate_out / rate_in * 2^20
+	 *
+	 * To avoid over flow, rate_out is u64.
+	 * The result should be u32 or unsigned long.
+	 */
+
+	rate_out = (u64)ratio * rate_in;
+	return rate_out >> 20;
+}
+
+static int cs2000_ratio_set(struct cs2000_priv *priv,
+			    int ch, u32 rate_in, u32 rate_out)
+{
+	u32 val;
+	unsigned int i;
+	int ret;
+
+	if (CH_SIZE_ERR(ch))
+		return -EINVAL;
+
+	val = cs2000_rate_to_ratio(rate_in, rate_out);
+	for (i = 0; i < RATIO_REG_SIZE; i++) {
+		ret = cs2000_write(priv,
+				   Ratio_Add(ch, i),
+				   Ratio_Val(val, i));
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static u32 cs2000_ratio_get(struct cs2000_priv *priv, int ch)
+{
+	s32 tmp;
+	u32 val;
+	unsigned int i;
+
+	val = 0;
+	for (i = 0; i < RATIO_REG_SIZE; i++) {
+		tmp = cs2000_read(priv, Ratio_Add(ch, i));
+		if (tmp < 0)
+			return 0;
+
+		val |= Val_Ratio(tmp, i);
+	}
+
+	return val;
+}
+
+static int cs2000_ratio_select(struct cs2000_priv *priv, int ch)
+{
+	int ret;
+
+	if (CH_SIZE_ERR(ch))
+		return -EINVAL;
+
+	/*
+	 * FIXME
+	 *
+	 * this driver supports static ratio mode only at this point.
+	 */
+	ret = cs2000_bset(priv, DEVICE_CFG1, RSEL_MASK, RSEL(ch));
+	if (ret < 0)
+		return ret;
+
+	ret = cs2000_write(priv, DEVICE_CFG2, 0x0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static unsigned long cs2000_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct cs2000_priv *priv = hw_to_priv(hw);
+	int ch = 0; /* it uses ch0 only at this point */
+	u32 ratio;
+
+	ratio = cs2000_ratio_get(priv, ch);
+
+	return cs2000_ratio_to_rate(ratio, parent_rate);
+}
+
+static long cs2000_round_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *parent_rate)
+{
+	u32 ratio;
+
+	ratio = cs2000_rate_to_ratio(*parent_rate, rate);
+
+	return cs2000_ratio_to_rate(ratio, *parent_rate);
+}
+
+static int __cs2000_set_rate(struct cs2000_priv *priv, int ch,
+			     unsigned long rate, unsigned long parent_rate)
+
+{
+	int ret;
+
+	ret = cs2000_clk_in_bound_rate(priv, parent_rate);
+	if (ret < 0)
+		return ret;
+
+	ret = cs2000_ratio_set(priv, ch, parent_rate, rate);
+	if (ret < 0)
+		return ret;
+
+	ret = cs2000_ratio_select(priv, ch);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int cs2000_set_rate(struct clk_hw *hw,
+			   unsigned long rate, unsigned long parent_rate)
+{
+	struct cs2000_priv *priv = hw_to_priv(hw);
+	int ch = 0; /* it uses ch0 only at this point */
+
+	return __cs2000_set_rate(priv, ch, rate, parent_rate);
+}
+
+static int cs2000_enable(struct clk_hw *hw)
+{
+	struct cs2000_priv *priv = hw_to_priv(hw);
+	int ret;
+
+	ret = cs2000_enable_dev_config(priv, true);
+	if (ret < 0)
+		return ret;
+
+	ret = cs2000_clk_out_enable(priv, true);
+	if (ret < 0)
+		return ret;
+
+	ret = cs2000_wait_pll_lock(priv);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+static void cs2000_disable(struct clk_hw *hw)
+{
+	struct cs2000_priv *priv = hw_to_priv(hw);
+
+	cs2000_enable_dev_config(priv, false);
+
+	cs2000_clk_out_enable(priv, false);
+}
+
+static u8 cs2000_get_parent(struct clk_hw *hw)
+{
+	/* always return REF_CLK */
+	return REF_CLK;
+}
+
+static const struct clk_ops cs2000_ops = {
+	.get_parent	= cs2000_get_parent,
+	.recalc_rate	= cs2000_recalc_rate,
+	.round_rate	= cs2000_round_rate,
+	.set_rate	= cs2000_set_rate,
+	.prepare	= cs2000_enable,
+	.unprepare	= cs2000_disable,
+};
+
+static int cs2000_clk_get(struct cs2000_priv *priv)
+{
+	struct i2c_client *client = priv_to_client(priv);
+	struct device *dev = &client->dev;
+	struct clk *clk_in, *ref_clk;
+
+	clk_in = devm_clk_get(dev, "clk_in");
+	/* not yet provided */
+	if (IS_ERR(clk_in))
+		return -EPROBE_DEFER;
+
+	ref_clk = devm_clk_get(dev, "ref_clk");
+	/* not yet provided */
+	if (IS_ERR(ref_clk))
+		return -EPROBE_DEFER;
+
+	priv->clk_in	= clk_in;
+	priv->ref_clk	= ref_clk;
+
+	return 0;
+}
+
+static int cs2000_clk_register(struct cs2000_priv *priv)
+{
+	struct device *dev = priv_to_dev(priv);
+	struct device_node *np = dev->of_node;
+	struct clk_init_data init;
+	const char *name = np->name;
+	struct clk *clk;
+	static const char *parent_names[CLK_MAX];
+	int ch = 0; /* it uses ch0 only at this point */
+	int rate;
+	int ret;
+
+	of_property_read_string(np, "clock-output-names", &name);
+
+	/*
+	 * set default rate as 1/1.
+	 * otherwise .set_rate which setup ratio
+	 * is never called if user requests 1/1 rate
+	 */
+	rate = clk_get_rate(priv->ref_clk);
+	ret = __cs2000_set_rate(priv, ch, rate, rate);
+	if (ret < 0)
+		return ret;
+
+	parent_names[CLK_IN]	= __clk_get_name(priv->clk_in);
+	parent_names[REF_CLK]	= __clk_get_name(priv->ref_clk);
+
+	init.name		= name;
+	init.ops		= &cs2000_ops;
+	init.flags		= CLK_SET_RATE_GATE;
+	init.parent_names	= parent_names;
+	init.num_parents	= ARRAY_SIZE(parent_names);
+
+	priv->hw.init = &init;
+
+	clk = clk_register(dev, &priv->hw);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ret = of_clk_add_provider(np, of_clk_src_simple_get, clk);
+	if (ret < 0) {
+		clk_unregister(clk);
+		return ret;
+	}
+
+	priv->clk_out = clk;
+
+	return 0;
+}
+
+static int cs2000_version_print(struct cs2000_priv *priv)
+{
+	struct i2c_client *client = priv_to_client(priv);
+	struct device *dev = &client->dev;
+	s32 val;
+	const char *revision;
+
+	val = cs2000_read(priv, DEVICE_ID);
+	if (val < 0)
+		return val;
+
+	/* CS2000 should be 0x0 */
+	if (val >> 3)
+		return -EIO;
+
+	switch (val & REVISION_MASK) {
+	case REVISION_B2_B3:
+		revision = "B2 / B3";
+		break;
+	case REVISION_C1:
+		revision = "C1";
+		break;
+	default:
+		return -EIO;
+	}
+
+	dev_info(dev, "revision - %s\n", revision);
+
+	return 0;
+}
+
+static int cs2000_remove(struct i2c_client *client)
+{
+	struct cs2000_priv *priv = i2c_get_clientdata(client);
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+
+	of_clk_del_provider(np);
+
+	clk_unregister(priv->clk_out);
+
+	return 0;
+}
+
+static int cs2000_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct cs2000_priv *priv;
+	struct device *dev = &client->dev;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client = client;
+	i2c_set_clientdata(client, priv);
+
+	ret = cs2000_clk_get(priv);
+	if (ret < 0)
+		return ret;
+
+	ret = cs2000_clk_register(priv);
+	if (ret < 0)
+		return ret;
+
+	ret = cs2000_version_print(priv);
+	if (ret < 0)
+		goto probe_err;
+
+	return 0;
+
+probe_err:
+	cs2000_remove(client);
+
+	return ret;
+}
+
+static struct i2c_driver cs2000_driver = {
+	.driver = {
+		.name = "cs2000-cp",
+		.of_match_table = cs2000_of_match,
+	},
+	.probe		= cs2000_probe,
+	.remove		= cs2000_remove,
+	.id_table	= cs2000_id,
+};
+
+module_i2c_driver(cs2000_driver);
+
+MODULE_DESCRIPTION("CS2000-CP driver");
+MODULE_AUTHOR("Kuninori Morimoto <[email protected]>");
+MODULE_LICENSE("GPL v2");

drivers/clk/clk-divider.c

@@ -32,13 +32,14 @@
 
 #define div_mask(width)	((1 << (width)) - 1)
 
-static unsigned int _get_table_maxdiv(const struct clk_div_table *table)
+static unsigned int _get_table_maxdiv(const struct clk_div_table *table,
+				      u8 width)
 {
-	unsigned int maxdiv = 0;
+	unsigned int maxdiv = 0, mask = div_mask(width);
 	const struct clk_div_table *clkt;
 
 	for (clkt = table; clkt->div; clkt++)
-		if (clkt->div > maxdiv)
+		if (clkt->div > maxdiv && clkt->val <= mask)
 			maxdiv = clkt->div;
 	return maxdiv;
 }
@@ -62,7 +63,7 @@ static unsigned int _get_maxdiv(const struct clk_div_table *table, u8 width,
 	if (flags & CLK_DIVIDER_POWER_OF_TWO)
 		return 1 << div_mask(width);
 	if (table)
-		return _get_table_maxdiv(table);
+		return _get_table_maxdiv(table, width);
 	return div_mask(width) + 1;
 }
 

drivers/clk/clk-mux.c

@@ -71,10 +71,9 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 	u32 val;
 	unsigned long flags = 0;
 
-	if (mux->table)
+	if (mux->table) {
 		index = mux->table[index];
-
-	else {
+	} else {
 		if (mux->flags & CLK_MUX_INDEX_BIT)
 			index = 1 << index;
 

drivers/clk/clk-si5351.c

@@ -1091,6 +1091,13 @@ static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 	si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
 			SI5351_CLK_POWERDOWN, 0);
 
+	/*
+	 * Do a pll soft reset on both plls, needed in some cases to get
+	 * all outputs running.
+	 */
+	si5351_reg_write(hwdata->drvdata, SI5351_PLL_RESET,
+			 SI5351_PLL_RESET_A | SI5351_PLL_RESET_B);
+
 	dev_dbg(&hwdata->drvdata->client->dev,
 		"%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
 		__func__, clk_hw_get_name(hw), (1 << rdiv),

drivers/clk/clk-tango4.c

@@ -0,0 +1,61 @@
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+static struct clk *out[2];
+static struct clk_onecell_data clk_data = { out, 2 };
+
+#define SYSCLK_CTRL	0x20
+#define CPUCLK_CTRL	0x24
+#define LEGACY_DIV	0x3c
+
+#define PLL_N(val)	(((val) >>  0) & 0x7f)
+#define PLL_K(val)	(((val) >> 13) & 0x7)
+#define PLL_M(val)	(((val) >> 16) & 0x7)
+#define DIV_INDEX(val)	(((val) >>  8) & 0xf)
+
+static void __init make_pll(int idx, const char *parent, void __iomem *base)
+{
+	char name[8];
+	u32 val, mul, div;
+
+	sprintf(name, "pll%d", idx);
+	val = readl_relaxed(base + idx*8);
+	mul =  PLL_N(val) + 1;
+	div = (PLL_M(val) + 1) << PLL_K(val);
+	clk_register_fixed_factor(NULL, name, parent, 0, mul, div);
+}
+
+static int __init get_div(void __iomem *base)
+{
+	u8 sysclk_tab[16] = { 2, 4, 3, 3, 3, 3, 3, 3, 4, 4, 4, 4 };
+	int idx = DIV_INDEX(readl_relaxed(base + LEGACY_DIV));
+
+	return sysclk_tab[idx];
+}
+
+static void __init tango4_clkgen_setup(struct device_node *np)
+{
+	int div, ret;
+	void __iomem *base = of_iomap(np, 0);
+	const char *parent = of_clk_get_parent_name(np, 0);
+
+	if (!base)
+		panic("%s: invalid address\n", np->full_name);
+
+	make_pll(0, parent, base);
+	make_pll(1, parent, base);
+
+	out[0] = clk_register_divider(NULL, "cpuclk", "pll0", 0,
+			base + CPUCLK_CTRL, 8, 8, CLK_DIVIDER_ONE_BASED, NULL);
+
+	div = readl_relaxed(base + SYSCLK_CTRL) & BIT(23) ? get_div(base) : 4;
+	out[1] = clk_register_fixed_factor(NULL, "sysclk", "pll1", 0, 1, div);
+
+	ret = of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+	if (IS_ERR(out[0]) || IS_ERR(out[1]) || ret < 0)
+		panic("%s: clk registration failed\n", np->full_name);
+}
+CLK_OF_DECLARE(tango4_clkgen, "sigma,tango4-clkgen", tango4_clkgen_setup);

drivers/clk/clk-xgene.c

@@ -351,7 +351,8 @@ static int xgene_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 		/* Set new divider */
 		data = xgene_clk_read(pclk->param.divider_reg +
 				pclk->param.reg_divider_offset);
-		data &= ~((1 << pclk->param.reg_divider_width) - 1);
+		data &= ~((1 << pclk->param.reg_divider_width) - 1)
+				<< pclk->param.reg_divider_shift;
 		data |= divider;
 		xgene_clk_write(data, pclk->param.divider_reg +
 					pclk->param.reg_divider_offset);

drivers/clk/clk.c

@@ -1944,7 +1944,7 @@ bool clk_is_match(const struct clk *p, const struct clk *q)
 	if (p == q)
 		return true;
 
-	/* true if clk->core pointers match. Avoid derefing garbage */
+	/* true if clk->core pointers match. Avoid dereferencing garbage */
 	if (!IS_ERR_OR_NULL(p) && !IS_ERR_OR_NULL(q))
 		if (p->core == q->core)
 			return true;
@@ -2482,7 +2482,7 @@ struct clk *__clk_create_clk(struct clk_hw *hw, const char *dev_id,
 	struct clk *clk;
 
 	/* This is to allow this function to be chained to others */
-	if (!hw || IS_ERR(hw))
+	if (IS_ERR_OR_NULL(hw))
 		return (struct clk *) hw;
 
 	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
@@ -2806,10 +2806,9 @@ void __clk_put(struct clk *clk)
  * re-enter into the clk framework by calling any top-level clk APIs;
  * this will cause a nested prepare_lock mutex.
  *
- * In all notification cases cases (pre, post and abort rate change) the
- * original clock rate is passed to the callback via struct
- * clk_notifier_data.old_rate and the new frequency is passed via struct
- * clk_notifier_data.new_rate.
+ * In all notification cases (pre, post and abort rate change) the original
+ * clock rate is passed to the callback via struct clk_notifier_data.old_rate
+ * and the new frequency is passed via struct clk_notifier_data.new_rate.
  *
  * clk_notifier_register() must be called from non-atomic context.
  * Returns -EINVAL if called with null arguments, -ENOMEM upon
@@ -3062,9 +3061,6 @@ const char *of_clk_get_parent_name(struct device_node *np, int index)
 	int count;
 	struct clk *clk;
 
-	if (index < 0)
-		return NULL;
-
 	rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", index,
 					&clkspec);
 	if (rc)
@@ -3083,6 +3079,9 @@ const char *of_clk_get_parent_name(struct device_node *np, int index)
 		}
 		count++;
 	}
+	/* We went off the end of 'clock-indices' without finding it */
+	if (prop && !vp)
+		return NULL;
 
 	if (of_property_read_string_index(clkspec.np, "clock-output-names",
 					  index,

drivers/clk/imx/clk-imx25.c

@@ -96,13 +96,11 @@ static struct clk ** const uart_clks[] __initconst = {
 	NULL
 };
 
-static int __init __mx25_clocks_init(unsigned long osc_rate,
-				     void __iomem *ccm_base)
+static int __init __mx25_clocks_init(void __iomem *ccm_base)
 {
 	BUG_ON(!ccm_base);
 
 	clk[dummy] = imx_clk_fixed("dummy", 0);
-	clk[osc] = imx_clk_fixed("osc", osc_rate);
 	clk[mpll] = imx_clk_pllv1(IMX_PLLV1_IMX25, "mpll", "osc", ccm(CCM_MPCTL));
 	clk[upll] = imx_clk_pllv1(IMX_PLLV1_IMX25, "upll", "osc", ccm(CCM_UPCTL));
 	clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4);
@@ -250,22 +248,10 @@ static int __init __mx25_clocks_init(unsigned long osc_rate,
 
 static void __init mx25_clocks_init_dt(struct device_node *np)
 {
-	struct device_node *refnp;
-	unsigned long osc_rate = 24000000;
 	void __iomem *ccm;
 
-	/* retrieve the freqency of fixed clocks from device tree */
-	for_each_compatible_node(refnp, NULL, "fixed-clock") {
-		u32 rate;
-		if (of_property_read_u32(refnp, "clock-frequency", &rate))
-			continue;
-
-		if (of_device_is_compatible(refnp, "fsl,imx-osc"))
-			osc_rate = rate;
-	}
-
 	ccm = of_iomap(np, 0);
-	__mx25_clocks_init(osc_rate, ccm);
+	__mx25_clocks_init(ccm);
 
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);

drivers/clk/imx/clk-imx51-imx53.c

@@ -519,10 +519,10 @@ static void __init mx53_clocks_init(struct device_node *np)
 						mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT);
 	clk[IMX5_CLK_LDB_DI0_GATE]	= imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
 	clk[IMX5_CLK_LDB_DI1_GATE]	= imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
-	clk[IMX5_CLK_IPU_DI0_SEL]	= imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
-						mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
-	clk[IMX5_CLK_IPU_DI1_SEL]	= imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
-						mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
+	clk[IMX5_CLK_IPU_DI0_SEL]	= imx_clk_mux_flags("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+						mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel), CLK_SET_RATE_PARENT);
+	clk[IMX5_CLK_IPU_DI1_SEL]	= imx_clk_mux_flags("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+						mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel), CLK_SET_RATE_PARENT);
 	clk[IMX5_CLK_TVE_EXT_SEL]	= imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
 						mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT);
 	clk[IMX5_CLK_TVE_GATE]		= imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);

drivers/clk/imx/clk-imx6q.c

@@ -70,7 +70,8 @@ static const char *cko_sels[] = { "cko1", "cko2", };
 static const char *lvds_sels[] = {
 	"dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
 	"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
-	"pcie_ref_125m", "sata_ref_100m",
+	"pcie_ref_125m", "sata_ref_100m",  "usbphy1", "usbphy2",
+	"dummy", "dummy", "dummy", "dummy", "osc",
 };
 static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", };
 static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };

drivers/clk/imx/clk-imx6ul.c

@@ -399,9 +399,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	/* mask handshake of mmdc */
 	writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
 
-	for (i = 0; i < ARRAY_SIZE(clks); i++)
-		if (IS_ERR(clks[i]))
-			pr_err("i.MX6UL clk %d: register failed with %ld\n", i, PTR_ERR(clks[i]));
+	imx_check_clocks(clks, ARRAY_SIZE(clks));
 
 	clk_data.clks = clks;
 	clk_data.clk_num = ARRAY_SIZE(clks);

drivers/clk/imx/clk-imx7d.c

@@ -833,10 +833,13 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 
 	clks[IMX7D_GPT_3M_CLK] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
 
-	for (i = 0; i < ARRAY_SIZE(clks); i++)
-		if (IS_ERR(clks[i]))
-			pr_err("i.MX7D clk %d: register failed with %ld\n",
-					i, PTR_ERR(clks[i]));
+	clks[IMX7D_CLK_ARM] = imx_clk_cpu("arm", "arm_a7_root_clk",
+					 clks[IMX7D_ARM_A7_ROOT_CLK],
+					 clks[IMX7D_ARM_A7_ROOT_SRC],
+					 clks[IMX7D_PLL_ARM_MAIN_CLK],
+					 clks[IMX7D_PLL_SYS_MAIN_CLK]);
+
+	imx_check_clocks(clks, ARRAY_SIZE(clks));
 
 	clk_data.clks = clks;
 	clk_data.clk_num = ARRAY_SIZE(clks);

drivers/clk/imx/clk-pllv3.c

@@ -97,6 +97,16 @@ static void clk_pllv3_unprepare(struct clk_hw *hw)
 	writel_relaxed(val, pll->base);
 }
 
+static int clk_pllv3_is_prepared(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+
+	if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+		return 1;
+
+	return 0;
+}
+
 static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
 					   unsigned long parent_rate)
 {
@@ -139,6 +149,7 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
 static const struct clk_ops clk_pllv3_ops = {
 	.prepare	= clk_pllv3_prepare,
 	.unprepare	= clk_pllv3_unprepare,
+	.is_prepared	= clk_pllv3_is_prepared,
 	.recalc_rate	= clk_pllv3_recalc_rate,
 	.round_rate	= clk_pllv3_round_rate,
 	.set_rate	= clk_pllv3_set_rate,
@@ -193,6 +204,7 @@ static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
 static const struct clk_ops clk_pllv3_sys_ops = {
 	.prepare	= clk_pllv3_prepare,
 	.unprepare	= clk_pllv3_unprepare,
+	.is_prepared	= clk_pllv3_is_prepared,
 	.recalc_rate	= clk_pllv3_sys_recalc_rate,
 	.round_rate	= clk_pllv3_sys_round_rate,
 	.set_rate	= clk_pllv3_sys_set_rate,
@@ -265,6 +277,7 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
 static const struct clk_ops clk_pllv3_av_ops = {
 	.prepare	= clk_pllv3_prepare,
 	.unprepare	= clk_pllv3_unprepare,
+	.is_prepared	= clk_pllv3_is_prepared,
 	.recalc_rate	= clk_pllv3_av_recalc_rate,
 	.round_rate	= clk_pllv3_av_round_rate,
 	.set_rate	= clk_pllv3_av_set_rate,
@@ -279,6 +292,7 @@ static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
 static const struct clk_ops clk_pllv3_enet_ops = {
 	.prepare	= clk_pllv3_prepare,
 	.unprepare	= clk_pllv3_unprepare,
+	.is_prepared	= clk_pllv3_is_prepared,
 	.recalc_rate	= clk_pllv3_enet_recalc_rate,
 };
 

drivers/clk/qcom/Kconfig

@@ -106,3 +106,20 @@ config MSM_MMCC_8974
 	  Support for the multimedia clock controller on msm8974 devices.
 	  Say Y if you want to support multimedia devices such as display,
 	  graphics, video encode/decode, camera, etc.
+
+config MSM_GCC_8996
+	tristate "MSM8996 Global Clock Controller"
+	depends on COMMON_CLK_QCOM
+	help
+	  Support for the global clock controller on msm8996 devices.
+	  Say Y if you want to use peripheral devices such as UART, SPI,
+	  i2c, USB, UFS, SD/eMMC, PCIe, etc.
+
+config MSM_MMCC_8996
+	tristate "MSM8996 Multimedia Clock Controller"
+	select MSM_GCC_8996
+	depends on COMMON_CLK_QCOM
+	help
+	  Support for the multimedia clock controller on msm8996 devices.
+	  Say Y if you want to support multimedia devices such as display,
+	  graphics, video encode/decode, camera, etc.

drivers/clk/qcom/Makefile

@@ -2,6 +2,7 @@ obj-$(CONFIG_COMMON_CLK_QCOM) += clk-qcom.o
 
 clk-qcom-y += common.o
 clk-qcom-y += clk-regmap.o
+clk-qcom-y += clk-alpha-pll.o
 clk-qcom-y += clk-pll.o
 clk-qcom-y += clk-rcg.o
 clk-qcom-y += clk-rcg2.o
@@ -20,5 +21,7 @@ obj-$(CONFIG_MSM_GCC_8916) += gcc-msm8916.o
 obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o
 obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o
 obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
+obj-$(CONFIG_MSM_GCC_8996) += gcc-msm8996.o
 obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
 obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
+obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o

drivers/clk/qcom/clk-alpha-pll.c

@@ -0,0 +1,355 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+
+#include "clk-alpha-pll.h"
+
+#define PLL_MODE		0x00
+# define PLL_OUTCTRL		BIT(0)
+# define PLL_BYPASSNL		BIT(1)
+# define PLL_RESET_N		BIT(2)
+# define PLL_LOCK_COUNT_SHIFT	8
+# define PLL_LOCK_COUNT_MASK	0x3f
+# define PLL_BIAS_COUNT_SHIFT	14
+# define PLL_BIAS_COUNT_MASK	0x3f
+# define PLL_VOTE_FSM_ENA	BIT(20)
+# define PLL_VOTE_FSM_RESET	BIT(21)
+# define PLL_ACTIVE_FLAG	BIT(30)
+# define PLL_LOCK_DET		BIT(31)
+
+#define PLL_L_VAL		0x04
+#define PLL_ALPHA_VAL		0x08
+#define PLL_ALPHA_VAL_U		0x0c
+
+#define PLL_USER_CTL		0x10
+# define PLL_POST_DIV_SHIFT	8
+# define PLL_POST_DIV_MASK	0xf
+# define PLL_ALPHA_EN		BIT(24)
+# define PLL_VCO_SHIFT		20
+# define PLL_VCO_MASK		0x3
+
+#define PLL_USER_CTL_U		0x14
+
+#define PLL_CONFIG_CTL		0x18
+#define PLL_TEST_CTL		0x1c
+#define PLL_TEST_CTL_U		0x20
+#define PLL_STATUS		0x24
+
+/*
+ * Even though 40 bits are present, use only 32 for ease of calculation.
+ */
+#define ALPHA_REG_BITWIDTH	40
+#define ALPHA_BITWIDTH		32
+
+#define to_clk_alpha_pll(_hw) container_of(to_clk_regmap(_hw), \
+					   struct clk_alpha_pll, clkr)
+
+#define to_clk_alpha_pll_postdiv(_hw) container_of(to_clk_regmap(_hw), \
+					   struct clk_alpha_pll_postdiv, clkr)
+
+static int wait_for_pll(struct clk_alpha_pll *pll)
+{
+	u32 val, mask, off;
+	int count;
+	int ret;
+	const char *name = clk_hw_get_name(&pll->clkr.hw);
+
+	off = pll->offset;
+	ret = regmap_read(pll->clkr.regmap, off + PLL_MODE, &val);
+	if (ret)
+		return ret;
+
+	if (val & PLL_VOTE_FSM_ENA)
+		mask = PLL_ACTIVE_FLAG;
+	else
+		mask = PLL_LOCK_DET;
+
+	/* Wait for pll to enable. */
+	for (count = 100; count > 0; count--) {
+		ret = regmap_read(pll->clkr.regmap, off + PLL_MODE, &val);
+		if (ret)
+			return ret;
+		if ((val & mask) == mask)
+			return 0;
+
+		udelay(1);
+	}
+
+	WARN(1, "%s didn't enable after voting for it!\n", name);
+	return -ETIMEDOUT;
+}
+
+static int clk_alpha_pll_enable(struct clk_hw *hw)
+{
+	int ret;
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 val, mask, off;
+
+	off = pll->offset;
+
+	mask = PLL_OUTCTRL | PLL_RESET_N | PLL_BYPASSNL;
+	ret = regmap_read(pll->clkr.regmap, off + PLL_MODE, &val);
+	if (ret)
+		return ret;
+
+	/* If in FSM mode, just vote for it */
+	if (val & PLL_VOTE_FSM_ENA) {
+		ret = clk_enable_regmap(hw);
+		if (ret)
+			return ret;
+		return wait_for_pll(pll);
+	}
+
+	/* Skip if already enabled */
+	if ((val & mask) == mask)
+		return 0;
+
+	ret = regmap_update_bits(pll->clkr.regmap, off + PLL_MODE,
+				 PLL_BYPASSNL, PLL_BYPASSNL);
+	if (ret)
+		return ret;
+
+	/*
+	 * H/W requires a 5us delay between disabling the bypass and
+	 * de-asserting the reset.
+	 */
+	mb();
+	udelay(5);
+
+	ret = regmap_update_bits(pll->clkr.regmap, off + PLL_MODE,
+				 PLL_RESET_N, PLL_RESET_N);
+	if (ret)
+		return ret;
+
+	ret = wait_for_pll(pll);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(pll->clkr.regmap, off + PLL_MODE,
+				 PLL_OUTCTRL, PLL_OUTCTRL);
+
+	/* Ensure that the write above goes through before returning. */
+	mb();
+	return ret;
+}
+
+static void clk_alpha_pll_disable(struct clk_hw *hw)
+{
+	int ret;
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 val, mask, off;
+
+	off = pll->offset;
+
+	ret = regmap_read(pll->clkr.regmap, off + PLL_MODE, &val);
+	if (ret)
+		return;
+
+	/* If in FSM mode, just unvote it */
+	if (val & PLL_VOTE_FSM_ENA) {
+		clk_disable_regmap(hw);
+		return;
+	}
+
+	mask = PLL_OUTCTRL;
+	regmap_update_bits(pll->clkr.regmap, off + PLL_MODE, mask, 0);
+
+	/* Delay of 2 output clock ticks required until output is disabled */
+	mb();
+	udelay(1);
+
+	mask = PLL_RESET_N | PLL_BYPASSNL;
+	regmap_update_bits(pll->clkr.regmap, off + PLL_MODE, mask, 0);
+}
+
+static unsigned long alpha_pll_calc_rate(u64 prate, u32 l, u32 a)
+{
+	return (prate * l) + ((prate * a) >> ALPHA_BITWIDTH);
+}
+
+static unsigned long
+alpha_pll_round_rate(unsigned long rate, unsigned long prate, u32 *l, u64 *a)
+{
+	u64 remainder;
+	u64 quotient;
+
+	quotient = rate;
+	remainder = do_div(quotient, prate);
+	*l = quotient;
+
+	if (!remainder) {
+		*a = 0;
+		return rate;
+	}
+
+	/* Upper ALPHA_BITWIDTH bits of Alpha */
+	quotient = remainder << ALPHA_BITWIDTH;
+	remainder = do_div(quotient, prate);
+
+	if (remainder)
+		quotient++;
+
+	*a = quotient;
+	return alpha_pll_calc_rate(prate, *l, *a);
+}
+
+static const struct pll_vco *
+alpha_pll_find_vco(const struct clk_alpha_pll *pll, unsigned long rate)
+{
+	const struct pll_vco *v = pll->vco_table;
+	const struct pll_vco *end = v + pll->num_vco;
+
+	for (; v < end; v++)
+		if (rate >= v->min_freq && rate <= v->max_freq)
+			return v;
+
+	return NULL;
+}
+
+static unsigned long
+clk_alpha_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	u32 l, low, high, ctl;
+	u64 a = 0, prate = parent_rate;
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 off = pll->offset;
+
+	regmap_read(pll->clkr.regmap, off + PLL_L_VAL, &l);
+
+	regmap_read(pll->clkr.regmap, off + PLL_USER_CTL, &ctl);
+	if (ctl & PLL_ALPHA_EN) {
+		regmap_read(pll->clkr.regmap, off + PLL_ALPHA_VAL, &low);
+		regmap_read(pll->clkr.regmap, off + PLL_ALPHA_VAL_U, &high);
+		a = (u64)high << 32 | low;
+		a >>= ALPHA_REG_BITWIDTH - ALPHA_BITWIDTH;
+	}
+
+	return alpha_pll_calc_rate(prate, l, a);
+}
+
+static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long prate)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	const struct pll_vco *vco;
+	u32 l, off = pll->offset;
+	u64 a;
+
+	rate = alpha_pll_round_rate(rate, prate, &l, &a);
+	vco = alpha_pll_find_vco(pll, rate);
+	if (!vco) {
+		pr_err("alpha pll not in a valid vco range\n");
+		return -EINVAL;
+	}
+
+	a <<= (ALPHA_REG_BITWIDTH - ALPHA_BITWIDTH);
+
+	regmap_write(pll->clkr.regmap, off + PLL_L_VAL, l);
+	regmap_write(pll->clkr.regmap, off + PLL_ALPHA_VAL, a);
+	regmap_write(pll->clkr.regmap, off + PLL_ALPHA_VAL_U, a >> 32);
+
+	regmap_update_bits(pll->clkr.regmap, off + PLL_USER_CTL,
+			   PLL_VCO_MASK << PLL_VCO_SHIFT,
+			   vco->val << PLL_VCO_SHIFT);
+
+	regmap_update_bits(pll->clkr.regmap, off + PLL_USER_CTL, PLL_ALPHA_EN,
+			   PLL_ALPHA_EN);
+
+	return 0;
+}
+
+static long clk_alpha_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long *prate)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 l;
+	u64 a;
+	unsigned long min_freq, max_freq;
+
+	rate = alpha_pll_round_rate(rate, *prate, &l, &a);
+	if (alpha_pll_find_vco(pll, rate))
+		return rate;
+
+	min_freq = pll->vco_table[0].min_freq;
+	max_freq = pll->vco_table[pll->num_vco - 1].max_freq;
+
+	return clamp(rate, min_freq, max_freq);
+}
+
+const struct clk_ops clk_alpha_pll_ops = {
+	.enable = clk_alpha_pll_enable,
+	.disable = clk_alpha_pll_disable,
+	.recalc_rate = clk_alpha_pll_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+	.set_rate = clk_alpha_pll_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_ops);
+
+static unsigned long
+clk_alpha_pll_postdiv_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
+	u32 ctl;
+
+	regmap_read(pll->clkr.regmap, pll->offset + PLL_USER_CTL, &ctl);
+
+	ctl >>= PLL_POST_DIV_SHIFT;
+	ctl &= PLL_POST_DIV_MASK;
+
+	return parent_rate >> fls(ctl);
+}
+
+static const struct clk_div_table clk_alpha_div_table[] = {
+	{ 0x0, 1 },
+	{ 0x1, 2 },
+	{ 0x3, 4 },
+	{ 0x7, 8 },
+	{ 0xf, 16 },
+	{ }
+};
+
+static long
+clk_alpha_pll_postdiv_round_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long *prate)
+{
+	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
+
+	return divider_round_rate(hw, rate, prate, clk_alpha_div_table,
+				  pll->width, CLK_DIVIDER_POWER_OF_TWO);
+}
+
+static int clk_alpha_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
+					  unsigned long parent_rate)
+{
+	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
+	int div;
+
+	/* 16 -> 0xf, 8 -> 0x7, 4 -> 0x3, 2 -> 0x1, 1 -> 0x0 */
+	div = DIV_ROUND_UP_ULL((u64)parent_rate, rate) - 1;
+
+	return regmap_update_bits(pll->clkr.regmap, pll->offset + PLL_USER_CTL,
+				  PLL_POST_DIV_MASK << PLL_POST_DIV_SHIFT,
+				  div << PLL_POST_DIV_SHIFT);
+}
+
+const struct clk_ops clk_alpha_pll_postdiv_ops = {
+	.recalc_rate = clk_alpha_pll_postdiv_recalc_rate,
+	.round_rate = clk_alpha_pll_postdiv_round_rate,
+	.set_rate = clk_alpha_pll_postdiv_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_ops);

drivers/clk/qcom/clk-alpha-pll.h

@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCOM_CLK_ALPHA_PLL_H__
+#define __QCOM_CLK_ALPHA_PLL_H__
+
+#include <linux/clk-provider.h>
+#include "clk-regmap.h"
+
+struct pll_vco {
+	unsigned long min_freq;
+	unsigned long max_freq;
+	u32 val;
+};
+
+/**
+ * struct clk_alpha_pll - phase locked loop (PLL)
+ * @offset: base address of registers
+ * @vco_table: array of VCO settings
+ * @clkr: regmap clock handle
+ */
+struct clk_alpha_pll {
+	u32 offset;
+
+	const struct pll_vco *vco_table;
+	size_t num_vco;
+
+	struct clk_regmap clkr;
+};
+
+/**
+ * struct clk_alpha_pll_postdiv - phase locked loop (PLL) post-divider
+ * @offset: base address of registers
+ * @width: width of post-divider
+ * @clkr: regmap clock handle
+ */
+struct clk_alpha_pll_postdiv {
+	u32 offset;
+	u8 width;
+
+	struct clk_regmap clkr;
+};
+
+extern const struct clk_ops clk_alpha_pll_ops;
+extern const struct clk_ops clk_alpha_pll_postdiv_ops;
+
+#endif

drivers/clk/qcom/clk-rcg.h

@@ -178,5 +178,6 @@ extern const struct clk_ops clk_edp_pixel_ops;
 extern const struct clk_ops clk_byte_ops;
 extern const struct clk_ops clk_byte2_ops;
 extern const struct clk_ops clk_pixel_ops;
+extern const struct clk_ops clk_gfx3d_ops;
 
 #endif

drivers/clk/qcom/clk-rcg2.c

@@ -723,3 +723,90 @@ const struct clk_ops clk_pixel_ops = {
 	.determine_rate = clk_pixel_determine_rate,
 };
 EXPORT_SYMBOL_GPL(clk_pixel_ops);
+
+static int clk_gfx3d_determine_rate(struct clk_hw *hw,
+				    struct clk_rate_request *req)
+{
+	struct clk_rate_request parent_req = { };
+	struct clk_hw *p2, *p8, *p9, *xo;
+	unsigned long p9_rate;
+	int ret;
+
+	xo = clk_hw_get_parent_by_index(hw, 0);
+	if (req->rate == clk_hw_get_rate(xo)) {
+		req->best_parent_hw = xo;
+		return 0;
+	}
+
+	p9 = clk_hw_get_parent_by_index(hw, 2);
+	p2 = clk_hw_get_parent_by_index(hw, 3);
+	p8 = clk_hw_get_parent_by_index(hw, 4);
+
+	/* PLL9 is a fixed rate PLL */
+	p9_rate = clk_hw_get_rate(p9);
+
+	parent_req.rate = req->rate = min(req->rate, p9_rate);
+	if (req->rate == p9_rate) {
+		req->rate = req->best_parent_rate = p9_rate;
+		req->best_parent_hw = p9;
+		return 0;
+	}
+
+	if (req->best_parent_hw == p9) {
+		/* Are we going back to a previously used rate? */
+		if (clk_hw_get_rate(p8) == req->rate)
+			req->best_parent_hw = p8;
+		else
+			req->best_parent_hw = p2;
+	} else if (req->best_parent_hw == p8) {
+		req->best_parent_hw = p2;
+	} else {
+		req->best_parent_hw = p8;
+	}
+
+	ret = __clk_determine_rate(req->best_parent_hw, &parent_req);
+	if (ret)
+		return ret;
+
+	req->rate = req->best_parent_rate = parent_req.rate;
+
+	return 0;
+}
+
+static int clk_gfx3d_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate, u8 index)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	u32 cfg;
+	int ret;
+
+	/* Just mux it, we don't use the division or m/n hardware */
+	cfg = rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
+	ret = regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, cfg);
+	if (ret)
+		return ret;
+
+	return update_config(rcg);
+}
+
+static int clk_gfx3d_set_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long parent_rate)
+{
+	/*
+	 * We should never get here; clk_gfx3d_determine_rate() should always
+	 * make us use a different parent than what we're currently using, so
+	 * clk_gfx3d_set_rate_and_parent() should always be called.
+	 */
+	return 0;
+}
+
+const struct clk_ops clk_gfx3d_ops = {
+	.is_enabled = clk_rcg2_is_enabled,
+	.get_parent = clk_rcg2_get_parent,
+	.set_parent = clk_rcg2_set_parent,
+	.recalc_rate = clk_rcg2_recalc_rate,
+	.set_rate = clk_gfx3d_set_rate,
+	.set_rate_and_parent = clk_gfx3d_set_rate_and_parent,
+	.determine_rate = clk_gfx3d_determine_rate,
+};
+EXPORT_SYMBOL_GPL(clk_gfx3d_ops);

drivers/clk/qcom/common.c

@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/clk-provider.h>
 #include <linux/reset-controller.h>
+#include <linux/of.h>
 
 #include "common.h"
 #include "clk-rcg.h"
@@ -88,6 +89,92 @@ static void qcom_cc_gdsc_unregister(void *data)
 	gdsc_unregister(data);
 }
 
+/*
+ * Backwards compatibility with old DTs. Register a pass-through factor 1/1
+ * clock to translate 'path' clk into 'name' clk and regsiter the 'path'
+ * clk as a fixed rate clock if it isn't present.
+ */
+static int _qcom_cc_register_board_clk(struct device *dev, const char *path,
+				       const char *name, unsigned long rate,
+				       bool add_factor)
+{
+	struct device_node *node = NULL;
+	struct device_node *clocks_node;
+	struct clk_fixed_factor *factor;
+	struct clk_fixed_rate *fixed;
+	struct clk *clk;
+	struct clk_init_data init_data = { };
+
+	clocks_node = of_find_node_by_path("/clocks");
+	if (clocks_node)
+		node = of_find_node_by_name(clocks_node, path);
+	of_node_put(clocks_node);
+
+	if (!node) {
+		fixed = devm_kzalloc(dev, sizeof(*fixed), GFP_KERNEL);
+		if (!fixed)
+			return -EINVAL;
+
+		fixed->fixed_rate = rate;
+		fixed->hw.init = &init_data;
+
+		init_data.name = path;
+		init_data.flags = CLK_IS_ROOT;
+		init_data.ops = &clk_fixed_rate_ops;
+
+		clk = devm_clk_register(dev, &fixed->hw);
+		if (IS_ERR(clk))
+			return PTR_ERR(clk);
+	}
+	of_node_put(node);
+
+	if (add_factor) {
+		factor = devm_kzalloc(dev, sizeof(*factor), GFP_KERNEL);
+		if (!factor)
+			return -EINVAL;
+
+		factor->mult = factor->div = 1;
+		factor->hw.init = &init_data;
+
+		init_data.name = name;
+		init_data.parent_names = &path;
+		init_data.num_parents = 1;
+		init_data.flags = 0;
+		init_data.ops = &clk_fixed_factor_ops;
+
+		clk = devm_clk_register(dev, &factor->hw);
+		if (IS_ERR(clk))
+			return PTR_ERR(clk);
+	}
+
+	return 0;
+}
+
+int qcom_cc_register_board_clk(struct device *dev, const char *path,
+			       const char *name, unsigned long rate)
+{
+	bool add_factor = true;
+	struct device_node *node;
+
+	/* The RPM clock driver will add the factor clock if present */
+	if (IS_ENABLED(CONFIG_QCOM_RPMCC)) {
+		node = of_find_compatible_node(NULL, NULL, "qcom,rpmcc");
+		if (of_device_is_available(node))
+			add_factor = false;
+		of_node_put(node);
+	}
+
+	return _qcom_cc_register_board_clk(dev, path, name, rate, add_factor);
+}
+EXPORT_SYMBOL_GPL(qcom_cc_register_board_clk);
+
+int qcom_cc_register_sleep_clk(struct device *dev)
+{
+	return _qcom_cc_register_board_clk(dev, "sleep_clk", "sleep_clk_src",
+					   32768, true);
+}
+EXPORT_SYMBOL_GPL(qcom_cc_register_sleep_clk);
+
 int qcom_cc_really_probe(struct platform_device *pdev,
 			 const struct qcom_cc_desc *desc, struct regmap *regmap)
 {

drivers/clk/qcom/common.h

@@ -37,6 +37,10 @@ extern const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f,
 extern int qcom_find_src_index(struct clk_hw *hw, const struct parent_map *map,
 			       u8 src);
 
+extern int qcom_cc_register_board_clk(struct device *dev, const char *path,
+				      const char *name, unsigned long rate);
+extern int qcom_cc_register_sleep_clk(struct device *dev);
+
 extern struct regmap *qcom_cc_map(struct platform_device *pdev,
 				  const struct qcom_cc_desc *desc);
 extern int qcom_cc_really_probe(struct platform_device *pdev,

drivers/clk/qcom/gcc-apq8084.c

@@ -3587,6 +3587,7 @@ static const struct regmap_config gcc_apq8084_regmap_config = {
 	.val_bits	= 32,
 	.max_register	= 0x1fc0,
 	.fast_io	= true,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
 static const struct qcom_cc_desc gcc_apq8084_desc = {
@@ -3607,18 +3608,16 @@ MODULE_DEVICE_TABLE(of, gcc_apq8084_match_table);
 
 static int gcc_apq8084_probe(struct platform_device *pdev)
 {
-	struct clk *clk;
+	int ret;
 	struct device *dev = &pdev->dev;
 
-	/* Temporary until RPM clocks supported */
-	clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ret = qcom_cc_register_board_clk(dev, "xo_board", "xo", 19200000);
+	if (ret)
+		return ret;
 
-	clk = clk_register_fixed_rate(dev, "sleep_clk_src", NULL,
-				      CLK_IS_ROOT, 32768);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ret = qcom_cc_register_sleep_clk(dev);
+	if (ret)
+		return ret;
 
 	return qcom_cc_probe(pdev, &gcc_apq8084_desc);
 }

drivers/clk/qcom/gcc-ipq806x.c

@@ -3005,6 +3005,7 @@ static const struct regmap_config gcc_ipq806x_regmap_config = {
 	.val_bits	= 32,
 	.max_register	= 0x3e40,
 	.fast_io	= true,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
 static const struct qcom_cc_desc gcc_ipq806x_desc = {
@@ -3023,19 +3024,17 @@ MODULE_DEVICE_TABLE(of, gcc_ipq806x_match_table);
 
 static int gcc_ipq806x_probe(struct platform_device *pdev)
 {
-	struct clk *clk;
 	struct device *dev = &pdev->dev;
 	struct regmap *regmap;
 	int ret;
 
-	/* Temporary until RPM clocks supported */
-	clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 25000000);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 19200000);
+	if (ret)
+		return ret;
 
-	clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 25000000);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 27000000);
+	if (ret)
+		return ret;
 
 	ret = qcom_cc_probe(pdev, &gcc_ipq806x_desc);
 	if (ret)

drivers/clk/qcom/gcc-msm8660.c

@@ -2702,6 +2702,7 @@ static const struct regmap_config gcc_msm8660_regmap_config = {
 	.val_bits	= 32,
 	.max_register	= 0x363c,
 	.fast_io	= true,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
 static const struct qcom_cc_desc gcc_msm8660_desc = {
@@ -2720,17 +2721,16 @@ MODULE_DEVICE_TABLE(of, gcc_msm8660_match_table);
 
 static int gcc_msm8660_probe(struct platform_device *pdev)
 {
-	struct clk *clk;
+	int ret;
 	struct device *dev = &pdev->dev;
 
-	/* Temporary until RPM clocks supported */
-	clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 19200000);
+	if (ret)
+		return ret;
 
-	clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 27000000);
+	if (ret)
+		return ret;
 
 	return qcom_cc_probe(pdev, &gcc_msm8660_desc);
 }

drivers/clk/qcom/gcc-msm8916.c

@@ -3336,6 +3336,7 @@ static const struct regmap_config gcc_msm8916_regmap_config = {
 	.val_bits	= 32,
 	.max_register	= 0x80000,
 	.fast_io	= true,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
 static const struct qcom_cc_desc gcc_msm8916_desc = {
@@ -3356,18 +3357,16 @@ MODULE_DEVICE_TABLE(of, gcc_msm8916_match_table);
 
 static int gcc_msm8916_probe(struct platform_device *pdev)
 {
-	struct clk *clk;
+	int ret;
 	struct device *dev = &pdev->dev;
 
-	/* Temporary until RPM clocks supported */
-	clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ret = qcom_cc_register_board_clk(dev, "xo_board", "xo", 19200000);
+	if (ret)
+		return ret;
 
-	clk = clk_register_fixed_rate(dev, "sleep_clk_src", NULL,
-				      CLK_IS_ROOT, 32768);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ret = qcom_cc_register_sleep_clk(dev);
+	if (ret)
+		return ret;
 
 	return qcom_cc_probe(pdev, &gcc_msm8916_desc);
 }

drivers/clk/qcom/gcc-msm8960.c

@@ -3468,6 +3468,7 @@ static const struct regmap_config gcc_msm8960_regmap_config = {
 	.val_bits	= 32,
 	.max_register	= 0x3660,
 	.fast_io	= true,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
 static const struct regmap_config gcc_apq8064_regmap_config = {
@@ -3476,6 +3477,7 @@ static const struct regmap_config gcc_apq8064_regmap_config = {
 	.val_bits	= 32,
 	.max_register	= 0x3880,
 	.fast_io	= true,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
 static const struct qcom_cc_desc gcc_msm8960_desc = {
@@ -3503,7 +3505,6 @@ MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table);
 
 static int gcc_msm8960_probe(struct platform_device *pdev)
 {
-	struct clk *clk;
 	struct device *dev = &pdev->dev;
 	const struct of_device_id *match;
 	struct platform_device *tsens;
@@ -3513,14 +3514,13 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
 	if (!match)
 		return -EINVAL;
 
-	/* Temporary until RPM clocks supported */
-	clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 19200000);
+	if (ret)
+		return ret;
 
-	clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 27000000);
+	if (ret)
+		return ret;
 
 	ret = qcom_cc_probe(pdev, match->data);
 	if (ret)

drivers/clk/qcom/gcc-msm8974.c

@@ -2680,6 +2680,7 @@ static const struct regmap_config gcc_msm8974_regmap_config = {
 	.val_bits	= 32,
 	.max_register	= 0x1fc0,
 	.fast_io	= true,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
 static const struct qcom_cc_desc gcc_msm8974_desc = {
@@ -2717,7 +2718,7 @@ static void msm8974_pro_clock_override(void)
 
 static int gcc_msm8974_probe(struct platform_device *pdev)
 {
-	struct clk *clk;
+	int ret;
 	struct device *dev = &pdev->dev;
 	bool pro;
 	const struct of_device_id *id;
@@ -2730,16 +2731,13 @@ static int gcc_msm8974_probe(struct platform_device *pdev)
 	if (pro)
 		msm8974_pro_clock_override();
 
-	/* Temporary until RPM clocks supported */
-	clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ret = qcom_cc_register_board_clk(dev, "xo_board", "xo", 19200000);
+	if (ret)
+		return ret;
 
-	/* Should move to DT node? */
-	clk = clk_register_fixed_rate(dev, "sleep_clk_src", NULL,
-				      CLK_IS_ROOT, 32768);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ret = qcom_cc_register_sleep_clk(dev);
+	if (ret)
+		return ret;
 
 	return qcom_cc_probe(pdev, &gcc_msm8974_desc);
 }

drivers/clk/qcom/lcc-ipq806x.c

@@ -419,6 +419,7 @@ static const struct regmap_config lcc_ipq806x_regmap_config = {
 	.val_bits	= 32,
 	.max_register	= 0xfc,
 	.fast_io	= true,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
 static const struct qcom_cc_desc lcc_ipq806x_desc = {

drivers/clk/qcom/lcc-msm8960.c

@@ -524,6 +524,7 @@ static const struct regmap_config lcc_msm8960_regmap_config = {
 	.val_bits	= 32,
 	.max_register	= 0xfc,
 	.fast_io	= true,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
 static const struct qcom_cc_desc lcc_msm8960_desc = {

drivers/clk/qcom/mmcc-apq8084.c

@@ -3368,6 +3368,7 @@ static const struct regmap_config mmcc_apq8084_regmap_config = {
 	.val_bits	= 32,
 	.max_register	= 0x5104,
 	.fast_io	= true,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
 static const struct qcom_cc_desc mmcc_apq8084_desc = {

drivers/clk/qcom/mmcc-msm8960.c

@@ -3029,6 +3029,7 @@ static const struct regmap_config mmcc_msm8960_regmap_config = {
 	.val_bits	= 32,
 	.max_register	= 0x334,
 	.fast_io	= true,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
 static const struct regmap_config mmcc_apq8064_regmap_config = {
@@ -3037,6 +3038,7 @@ static const struct regmap_config mmcc_apq8064_regmap_config = {
 	.val_bits	= 32,
 	.max_register	= 0x350,
 	.fast_io	= true,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
 static const struct qcom_cc_desc mmcc_msm8960_desc = {

drivers/clk/qcom/mmcc-msm8974.c

@@ -2594,6 +2594,7 @@ static const struct regmap_config mmcc_msm8974_regmap_config = {
 	.val_bits	= 32,
 	.max_register	= 0x5104,
 	.fast_io	= true,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
 static const struct qcom_cc_desc mmcc_msm8974_desc = {

drivers/clk/rockchip/Makefile

@@ -10,6 +10,8 @@ obj-y	+= clk-inverter.o
 obj-y	+= clk-mmc-phase.o
 obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
 
+obj-y	+= clk-rk3036.o
 obj-y	+= clk-rk3188.o
+obj-y	+= clk-rk3228.o
 obj-y	+= clk-rk3288.o
 obj-y	+= clk-rk3368.o

drivers/clk/rockchip/clk-cpu.c

@@ -242,8 +242,8 @@ struct clk *rockchip_clk_register_cpuclk(const char *name,
 	struct clk *clk, *cclk;
 	int ret;
 
-	if (num_parents != 2) {
-		pr_err("%s: needs two parent clocks\n", __func__);
+	if (num_parents < 2) {
+		pr_err("%s: needs at least two parent clocks\n", __func__);
 		return ERR_PTR(-EINVAL);
 	}
 

drivers/clk/rockchip/clk-pll.c

@@ -2,6 +2,9 @@
  * Copyright (c) 2014 MundoReader S.L.
  * Author: Heiko Stuebner <heiko@sntech.de>
  *
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Xing Zheng <zhengxing@rock-chips.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -19,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/clk-provider.h>
 #include <linux/regmap.h>
+#include <linux/clk.h>
 #include "clk.h"
 
 #define PLL_MODE_MASK		0x3
@@ -107,6 +111,252 @@ static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
 	return -ETIMEDOUT;
 }
 
+/**
+ * PLL used in RK3036
+ */
+
+#define RK3036_PLLCON(i)			(i * 0x4)
+#define RK3036_PLLCON0_FBDIV_MASK		0xfff
+#define RK3036_PLLCON0_FBDIV_SHIFT		0
+#define RK3036_PLLCON0_POSTDIV1_MASK		0x7
+#define RK3036_PLLCON0_POSTDIV1_SHIFT		12
+#define RK3036_PLLCON1_REFDIV_MASK		0x3f
+#define RK3036_PLLCON1_REFDIV_SHIFT		0
+#define RK3036_PLLCON1_POSTDIV2_MASK		0x7
+#define RK3036_PLLCON1_POSTDIV2_SHIFT		6
+#define RK3036_PLLCON1_DSMPD_MASK		0x1
+#define RK3036_PLLCON1_DSMPD_SHIFT		12
+#define RK3036_PLLCON2_FRAC_MASK		0xffffff
+#define RK3036_PLLCON2_FRAC_SHIFT		0
+
+#define RK3036_PLLCON1_PWRDOWN			(1 << 13)
+
+static void rockchip_rk3036_pll_get_params(struct rockchip_clk_pll *pll,
+					struct rockchip_pll_rate_table *rate)
+{
+	u32 pllcon;
+
+	pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(0));
+	rate->fbdiv = ((pllcon >> RK3036_PLLCON0_FBDIV_SHIFT)
+				& RK3036_PLLCON0_FBDIV_MASK);
+	rate->postdiv1 = ((pllcon >> RK3036_PLLCON0_POSTDIV1_SHIFT)
+				& RK3036_PLLCON0_POSTDIV1_MASK);
+
+	pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(1));
+	rate->refdiv = ((pllcon >> RK3036_PLLCON1_REFDIV_SHIFT)
+				& RK3036_PLLCON1_REFDIV_MASK);
+	rate->postdiv2 = ((pllcon >> RK3036_PLLCON1_POSTDIV2_SHIFT)
+				& RK3036_PLLCON1_POSTDIV2_MASK);
+	rate->dsmpd = ((pllcon >> RK3036_PLLCON1_DSMPD_SHIFT)
+				& RK3036_PLLCON1_DSMPD_MASK);
+
+	pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(2));
+	rate->frac = ((pllcon >> RK3036_PLLCON2_FRAC_SHIFT)
+				& RK3036_PLLCON2_FRAC_MASK);
+}
+
+static unsigned long rockchip_rk3036_pll_recalc_rate(struct clk_hw *hw,
+						     unsigned long prate)
+{
+	struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
+	struct rockchip_pll_rate_table cur;
+	u64 rate64 = prate;
+
+	rockchip_rk3036_pll_get_params(pll, &cur);
+
+	rate64 *= cur.fbdiv;
+	do_div(rate64, cur.refdiv);
+
+	if (cur.dsmpd == 0) {
+		/* fractional mode */
+		u64 frac_rate64 = prate * cur.frac;
+
+		do_div(frac_rate64, cur.refdiv);
+		rate64 += frac_rate64 >> 24;
+	}
+
+	do_div(rate64, cur.postdiv1);
+	do_div(rate64, cur.postdiv2);
+
+	return (unsigned long)rate64;
+}
+
+static int rockchip_rk3036_pll_set_params(struct rockchip_clk_pll *pll,
+				const struct rockchip_pll_rate_table *rate)
+{
+	const struct clk_ops *pll_mux_ops = pll->pll_mux_ops;
+	struct clk_mux *pll_mux = &pll->pll_mux;
+	struct rockchip_pll_rate_table cur;
+	u32 pllcon;
+	int rate_change_remuxed = 0;
+	int cur_parent;
+	int ret;
+
+	pr_debug("%s: rate settings for %lu fbdiv: %d, postdiv1: %d, refdiv: %d, postdiv2: %d, dsmpd: %d, frac: %d\n",
+		__func__, rate->rate, rate->fbdiv, rate->postdiv1, rate->refdiv,
+		rate->postdiv2, rate->dsmpd, rate->frac);
+
+	rockchip_rk3036_pll_get_params(pll, &cur);
+	cur.rate = 0;
+
+	cur_parent = pll_mux_ops->get_parent(&pll_mux->hw);
+	if (cur_parent == PLL_MODE_NORM) {
+		pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW);
+		rate_change_remuxed = 1;
+	}
+
+	/* update pll values */
+	writel_relaxed(HIWORD_UPDATE(rate->fbdiv, RK3036_PLLCON0_FBDIV_MASK,
+					  RK3036_PLLCON0_FBDIV_SHIFT) |
+		       HIWORD_UPDATE(rate->postdiv1, RK3036_PLLCON0_POSTDIV1_MASK,
+					     RK3036_PLLCON0_POSTDIV1_SHIFT),
+		       pll->reg_base + RK3036_PLLCON(0));
+
+	writel_relaxed(HIWORD_UPDATE(rate->refdiv, RK3036_PLLCON1_REFDIV_MASK,
+						   RK3036_PLLCON1_REFDIV_SHIFT) |
+		       HIWORD_UPDATE(rate->postdiv2, RK3036_PLLCON1_POSTDIV2_MASK,
+						     RK3036_PLLCON1_POSTDIV2_SHIFT) |
+		       HIWORD_UPDATE(rate->dsmpd, RK3036_PLLCON1_DSMPD_MASK,
+						  RK3036_PLLCON1_DSMPD_SHIFT),
+		       pll->reg_base + RK3036_PLLCON(1));
+
+	/* GPLL CON2 is not HIWORD_MASK */
+	pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(2));
+	pllcon &= ~(RK3036_PLLCON2_FRAC_MASK << RK3036_PLLCON2_FRAC_SHIFT);
+	pllcon |= rate->frac << RK3036_PLLCON2_FRAC_SHIFT;
+	writel_relaxed(pllcon, pll->reg_base + RK3036_PLLCON(2));
+
+	/* wait for the pll to lock */
+	ret = rockchip_pll_wait_lock(pll);
+	if (ret) {
+		pr_warn("%s: pll update unsucessful, trying to restore old params\n",
+			__func__);
+		rockchip_rk3036_pll_set_params(pll, &cur);
+	}
+
+	if (rate_change_remuxed)
+		pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM);
+
+	return ret;
+}
+
+static int rockchip_rk3036_pll_set_rate(struct clk_hw *hw, unsigned long drate,
+					unsigned long prate)
+{
+	struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
+	const struct rockchip_pll_rate_table *rate;
+	unsigned long old_rate = rockchip_rk3036_pll_recalc_rate(hw, prate);
+	struct regmap *grf = rockchip_clk_get_grf();
+
+	if (IS_ERR(grf)) {
+		pr_debug("%s: grf regmap not available, aborting rate change\n",
+			 __func__);
+		return PTR_ERR(grf);
+	}
+
+	pr_debug("%s: changing %s from %lu to %lu with a parent rate of %lu\n",
+		 __func__, __clk_get_name(hw->clk), old_rate, drate, prate);
+
+	/* Get required rate settings from table */
+	rate = rockchip_get_pll_settings(pll, drate);
+	if (!rate) {
+		pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+			drate, __clk_get_name(hw->clk));
+		return -EINVAL;
+	}
+
+	return rockchip_rk3036_pll_set_params(pll, rate);
+}
+
+static int rockchip_rk3036_pll_enable(struct clk_hw *hw)
+{
+	struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
+
+	writel(HIWORD_UPDATE(0, RK3036_PLLCON1_PWRDOWN, 0),
+	       pll->reg_base + RK3036_PLLCON(1));
+
+	return 0;
+}
+
+static void rockchip_rk3036_pll_disable(struct clk_hw *hw)
+{
+	struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
+
+	writel(HIWORD_UPDATE(RK3036_PLLCON1_PWRDOWN,
+			     RK3036_PLLCON1_PWRDOWN, 0),
+	       pll->reg_base + RK3036_PLLCON(1));
+}
+
+static int rockchip_rk3036_pll_is_enabled(struct clk_hw *hw)
+{
+	struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
+	u32 pllcon = readl(pll->reg_base + RK3036_PLLCON(1));
+
+	return !(pllcon & RK3036_PLLCON1_PWRDOWN);
+}
+
+static void rockchip_rk3036_pll_init(struct clk_hw *hw)
+{
+	struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
+	const struct rockchip_pll_rate_table *rate;
+	struct rockchip_pll_rate_table cur;
+	unsigned long drate;
+
+	if (!(pll->flags & ROCKCHIP_PLL_SYNC_RATE))
+		return;
+
+	drate = clk_hw_get_rate(hw);
+	rate = rockchip_get_pll_settings(pll, drate);
+
+	/* when no rate setting for the current rate, rely on clk_set_rate */
+	if (!rate)
+		return;
+
+	rockchip_rk3036_pll_get_params(pll, &cur);
+
+	pr_debug("%s: pll %s@%lu: Hz\n", __func__, __clk_get_name(hw->clk),
+		 drate);
+	pr_debug("old - fbdiv: %d, postdiv1: %d, refdiv: %d, postdiv2: %d, dsmpd: %d, frac: %d\n",
+		 cur.fbdiv, cur.postdiv1, cur.refdiv, cur.postdiv2,
+		 cur.dsmpd, cur.frac);
+	pr_debug("new - fbdiv: %d, postdiv1: %d, refdiv: %d, postdiv2: %d, dsmpd: %d, frac: %d\n",
+		 rate->fbdiv, rate->postdiv1, rate->refdiv, rate->postdiv2,
+		 rate->dsmpd, rate->frac);
+
+	if (rate->fbdiv != cur.fbdiv || rate->postdiv1 != cur.postdiv1 ||
+		rate->refdiv != cur.refdiv || rate->postdiv2 != cur.postdiv2 ||
+		rate->dsmpd != cur.dsmpd || rate->frac != cur.frac) {
+		struct clk *parent = clk_get_parent(hw->clk);
+
+		if (!parent) {
+			pr_warn("%s: parent of %s not available\n",
+				__func__, __clk_get_name(hw->clk));
+			return;
+		}
+
+		pr_debug("%s: pll %s: rate params do not match rate table, adjusting\n",
+			 __func__, __clk_get_name(hw->clk));
+		rockchip_rk3036_pll_set_params(pll, rate);
+	}
+}
+
+static const struct clk_ops rockchip_rk3036_pll_clk_norate_ops = {
+	.recalc_rate = rockchip_rk3036_pll_recalc_rate,
+	.enable = rockchip_rk3036_pll_enable,
+	.disable = rockchip_rk3036_pll_disable,
+	.is_enabled = rockchip_rk3036_pll_is_enabled,
+};
+
+static const struct clk_ops rockchip_rk3036_pll_clk_ops = {
+	.recalc_rate = rockchip_rk3036_pll_recalc_rate,
+	.round_rate = rockchip_pll_round_rate,
+	.set_rate = rockchip_rk3036_pll_set_rate,
+	.enable = rockchip_rk3036_pll_enable,
+	.disable = rockchip_rk3036_pll_disable,
+	.is_enabled = rockchip_rk3036_pll_is_enabled,
+	.init = rockchip_rk3036_pll_init,
+};
+
 /**
  * PLL used in RK3066, RK3188 and RK3288
  */
@@ -376,7 +626,7 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type,
 	pll_mux->lock = lock;
 	pll_mux->hw.init = &init;
 
-	if (pll_type == pll_rk3066)
+	if (pll_type == pll_rk3036 || pll_type == pll_rk3066)
 		pll_mux->flags |= CLK_MUX_HIWORD_MASK;
 
 	/* the actual muxing is xin24m, pll-output, xin32k */
@@ -421,6 +671,12 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type,
 	}
 
 	switch (pll_type) {
+	case pll_rk3036:
+		if (!pll->rate_table)
+			init.ops = &rockchip_rk3036_pll_clk_norate_ops;
+		else
+			init.ops = &rockchip_rk3036_pll_clk_ops;
+		break;
 	case pll_rk3066:
 		if (!pll->rate_table)
 			init.ops = &rockchip_rk3066_pll_clk_norate_ops;

drivers/clk/rockchip/clk-rk3036.c

@@ -0,0 +1,478 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Xing Zheng <zhengxing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include "clk.h"
+
+#define RK3036_GRF_SOC_STATUS0	0x14c
+
+enum rk3036_plls {
+	apll, dpll, gpll,
+};
+
+static struct rockchip_pll_rate_table rk3036_pll_rates[] = {
+	/* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
+	RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
+	RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0),
+	RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0),
+	RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0),
+	RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0),
+	RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0),
+	RK3036_PLL_RATE(  96000000, 1, 64, 4, 4, 1, 0),
+	{ /* sentinel */ },
+};
+
+#define RK3036_DIV_CPU_MASK		0x1f
+#define RK3036_DIV_CPU_SHIFT		8
+
+#define RK3036_DIV_PERI_MASK		0xf
+#define RK3036_DIV_PERI_SHIFT		0
+#define RK3036_DIV_ACLK_MASK		0x7
+#define RK3036_DIV_ACLK_SHIFT		4
+#define RK3036_DIV_HCLK_MASK		0x3
+#define RK3036_DIV_HCLK_SHIFT		8
+#define RK3036_DIV_PCLK_MASK		0x7
+#define RK3036_DIV_PCLK_SHIFT		12
+
+#define RK3036_CLKSEL1(_core_periph_div)					\
+	{									\
+		.reg = RK2928_CLKSEL_CON(1),					\
+		.val = HIWORD_UPDATE(_core_periph_div, RK3036_DIV_PERI_MASK,	\
+				RK3036_DIV_PERI_SHIFT)				\
+	}
+
+#define RK3036_CPUCLK_RATE(_prate, _core_periph_div)			\
+	{								\
+		.prate = _prate,					\
+		.divs = {						\
+			RK3036_CLKSEL1(_core_periph_div),		\
+		},							\
+	}
+
+static struct rockchip_cpuclk_rate_table rk3036_cpuclk_rates[] __initdata = {
+	RK3036_CPUCLK_RATE(816000000, 4),
+	RK3036_CPUCLK_RATE(600000000, 4),
+	RK3036_CPUCLK_RATE(312000000, 4),
+};
+
+static const struct rockchip_cpuclk_reg_data rk3036_cpuclk_data = {
+	.core_reg = RK2928_CLKSEL_CON(0),
+	.div_core_shift = 0,
+	.div_core_mask = 0x1f,
+	.mux_core_shift = 7,
+};
+
+PNAME(mux_pll_p)		= { "xin24m", "xin24m" };
+
+PNAME(mux_armclk_p)		= { "apll", "gpll_armclk" };
+PNAME(mux_busclk_p)		= { "apll", "dpll_cpu", "gpll_cpu" };
+PNAME(mux_ddrphy_p)		= { "dpll_ddr", "gpll_ddr" };
+PNAME(mux_pll_src_3plls_p)	= { "apll", "dpll", "gpll" };
+PNAME(mux_timer_p)		= { "xin24m", "pclk_peri_src" };
+
+PNAME(mux_pll_src_apll_dpll_gpll_usb480m_p)	= { "apll", "dpll", "gpll" "usb480m" };
+
+PNAME(mux_mmc_src_p)	= { "apll", "dpll", "gpll", "xin24m" };
+PNAME(mux_i2s_pre_p)	= { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" };
+PNAME(mux_i2s_clkout_p)	= { "i2s_pre", "xin12m" };
+PNAME(mux_spdif_p)	= { "spdif_src", "spdif_frac", "xin12m" };
+PNAME(mux_uart0_p)	= { "uart0_src", "uart0_frac", "xin24m" };
+PNAME(mux_uart1_p)	= { "uart1_src", "uart1_frac", "xin24m" };
+PNAME(mux_uart2_p)	= { "uart2_src", "uart2_frac", "xin24m" };
+PNAME(mux_mac_p)	= { "mac_pll_src", "ext_gmac" };
+PNAME(mux_dclk_p)	= { "dclk_lcdc", "dclk_cru" };
+
+static struct rockchip_pll_clock rk3036_pll_clks[] __initdata = {
+	[apll] = PLL(pll_rk3036, PLL_APLL, "apll", mux_pll_p, 0, RK2928_PLL_CON(0),
+		     RK2928_MODE_CON, 0, 5, 0, rk3036_pll_rates),
+	[dpll] = PLL(pll_rk3036, PLL_DPLL, "dpll", mux_pll_p, 0, RK2928_PLL_CON(4),
+		     RK2928_MODE_CON, 4, 4, 0, NULL),
+	[gpll] = PLL(pll_rk3036, PLL_GPLL, "gpll", mux_pll_p, 0, RK2928_PLL_CON(12),
+		     RK2928_MODE_CON, 12, 6, ROCKCHIP_PLL_SYNC_RATE, rk3036_pll_rates),
+};
+
+#define MFLAGS CLK_MUX_HIWORD_MASK
+#define DFLAGS CLK_DIVIDER_HIWORD_MASK
+#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
+
+static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
+	/*
+	 * Clock-Architecture Diagram 1
+	 */
+
+	GATE(0, "gpll_armclk", "gpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 6, GFLAGS),
+
+	/*
+	 * Clock-Architecture Diagram 2
+	 */
+
+	GATE(0, "dpll_ddr", "dpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 2, GFLAGS),
+	GATE(0, "gpll_ddr", "gpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 8, GFLAGS),
+	COMPOSITE_NOGATE(0, "ddrphy2x", mux_ddrphy_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(26), 8, 1, MFLAGS, 0, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+
+	COMPOSITE_NOMUX(0, "pclk_dbg", "armclk", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 0, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(0), 7, GFLAGS),
+	COMPOSITE_NOMUX(0, "aclk_core_pre", "armclk", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 4, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(0), 7, GFLAGS),
+
+	GATE(0, "dpll_cpu", "dpll", 0, RK2928_CLKGATE_CON(10), 8, GFLAGS),
+	GATE(0, "gpll_cpu", "gpll", 0, RK2928_CLKGATE_CON(0), 1, GFLAGS),
+	COMPOSITE_NOGATE(0, "aclk_cpu_src", mux_busclk_p, 0,
+			RK2928_CLKSEL_CON(0), 14, 2, MFLAGS, 8, 5, DFLAGS),
+	GATE(ACLK_CPU, "aclk_cpu", "aclk_cpu_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 3, GFLAGS),
+	COMPOSITE_NOMUX(PCLK_CPU, "pclk_cpu", "aclk_cpu_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 12, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(0), 5, GFLAGS),
+	COMPOSITE_NOMUX(HCLK_CPU, "hclk_cpu", "aclk_cpu_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(0), 4, GFLAGS),
+
+	COMPOSITE(0, "aclk_peri_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(10), 14, 2, MFLAGS, 0, 5, DFLAGS,
+			RK2928_CLKGATE_CON(2), 0, GFLAGS),
+
+	GATE(ACLK_PERI, "aclk_peri", "aclk_peri_src", 0,
+			RK2928_CLKGATE_CON(2), 1, GFLAGS),
+	DIV(0, "pclk_peri_src", "aclk_peri_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(10), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+	GATE(PCLK_PERI, "pclk_peri", "pclk_peri_src", 0,
+			RK2928_CLKGATE_CON(2), 3, GFLAGS),
+	DIV(0, "hclk_peri_src", "aclk_peri_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(10), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+	GATE(HCLK_PERI, "hclk_peri", "hclk_peri_src", 0,
+			RK2928_CLKGATE_CON(2), 2, GFLAGS),
+
+	COMPOSITE_NODIV(SCLK_TIMER0, "sclk_timer0", mux_timer_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(2), 4, 1, DFLAGS,
+			RK2928_CLKGATE_CON(1), 0, GFLAGS),
+	COMPOSITE_NODIV(SCLK_TIMER1, "sclk_timer1", mux_timer_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(2), 5, 1, DFLAGS,
+			RK2928_CLKGATE_CON(1), 1, GFLAGS),
+	COMPOSITE_NODIV(SCLK_TIMER2, "sclk_timer2", mux_timer_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(2), 6, 1, DFLAGS,
+			RK2928_CLKGATE_CON(2), 4, GFLAGS),
+	COMPOSITE_NODIV(SCLK_TIMER3, "sclk_timer3", mux_timer_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(2), 7, 1, DFLAGS,
+			RK2928_CLKGATE_CON(2), 5, GFLAGS),
+
+	MUX(0, "uart_pll_clk", mux_pll_src_apll_dpll_gpll_usb480m_p, 0,
+			RK2928_CLKSEL_CON(13), 10, 2, MFLAGS),
+	COMPOSITE_NOMUX(0, "uart0_src", "uart_pll_clk", 0,
+			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+	COMPOSITE_NOMUX(0, "uart1_src", "uart_pll_clk", 0,
+			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+	COMPOSITE_NOMUX(0, "uart2_src", "uart_pll_clk", 0,
+			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+	COMPOSITE_FRAC(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(17), 0,
+			RK2928_CLKGATE_CON(1), 9, GFLAGS),
+	COMPOSITE_FRAC(0, "uart1_frac", "uart1_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(18), 0,
+			RK2928_CLKGATE_CON(1), 11, GFLAGS),
+	COMPOSITE_FRAC(0, "uart2_frac", "uart2_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(19), 0,
+			RK2928_CLKGATE_CON(1), 13, GFLAGS),
+	MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(13), 8, 2, MFLAGS),
+	MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(14), 8, 2, MFLAGS),
+	MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(15), 8, 2, MFLAGS),
+
+	COMPOSITE(0, "aclk_vcodec", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 11, GFLAGS),
+
+	COMPOSITE(0, "aclk_hvec", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(20), 0, 2, MFLAGS, 2, 5, DFLAGS,
+			RK2928_CLKGATE_CON(10), 6, GFLAGS),
+
+	COMPOSITE(0, "aclk_disp1_pre", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(31), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(1), 4, GFLAGS),
+	COMPOSITE(0, "hclk_disp_pre", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(0), 11, GFLAGS),
+	COMPOSITE(SCLK_LCDC, "dclk_lcdc", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(28), 0, 2, MFLAGS, 8, 8, DFLAGS,
+			RK2928_CLKGATE_CON(3), 2, GFLAGS),
+
+	COMPOSITE_NODIV(0, "sclk_sdmmc_src", mux_mmc_src_p, 0,
+			RK2928_CLKSEL_CON(12), 8, 2, DFLAGS,
+			RK2928_CLKGATE_CON(2), 11, GFLAGS),
+	DIV(SCLK_SDMMC, "sclk_sdmmc", "sclk_sdmmc_src", 0,
+			RK2928_CLKSEL_CON(11), 0, 7, DFLAGS),
+
+	COMPOSITE_NODIV(0, "sclk_sdio_src", mux_mmc_src_p, 0,
+			RK2928_CLKSEL_CON(12), 10, 2, DFLAGS,
+			RK2928_CLKGATE_CON(2), 13, GFLAGS),
+	DIV(SCLK_SDIO, "sclk_sdio", "sclk_sdio_src", 0,
+			RK2928_CLKSEL_CON(11), 8, 7, DFLAGS),
+
+	COMPOSITE(SCLK_EMMC, "sclk_emmc", mux_mmc_src_p, 0,
+			RK2928_CLKSEL_CON(12), 12, 2, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(2), 14, GFLAGS),
+
+	MMC(SCLK_SDMMC_DRV,    "sdmmc_drv",    "sclk_sdmmc", RK3036_SDMMC_CON0, 1),
+	MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "sclk_sdmmc", RK3036_SDMMC_CON1, 0),
+
+	MMC(SCLK_SDIO_DRV,     "sdio_drv",     "sclk_sdio",  RK3036_SDIO_CON0, 1),
+	MMC(SCLK_SDIO_SAMPLE,  "sdio_sample",  "sclk_sdio",  RK3036_SDIO_CON1, 0),
+
+	MMC(SCLK_EMMC_DRV,     "emmc_drv",     "sclk_emmc",  RK3036_EMMC_CON0,  1),
+	MMC(SCLK_EMMC_SAMPLE,  "emmc_sample",  "sclk_emmc",  RK3036_EMMC_CON1,  0),
+
+	COMPOSITE(0, "i2s_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(3), 14, 2, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(0), 9, GFLAGS),
+	COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(7), 0,
+			RK2928_CLKGATE_CON(0), 10, GFLAGS),
+	MUX(0, "i2s_pre", mux_i2s_pre_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(3), 8, 2, MFLAGS),
+	COMPOSITE_NODIV(SCLK_I2S_OUT, "i2s_clkout", mux_i2s_clkout_p, 0,
+			RK2928_CLKSEL_CON(3), 12, 1, MFLAGS,
+			RK2928_CLKGATE_CON(0), 13, GFLAGS),
+	GATE(SCLK_I2S, "sclk_i2s", "i2s_pre", CLK_SET_RATE_PARENT,
+			RK2928_CLKGATE_CON(0), 14, GFLAGS),
+
+	COMPOSITE(0, "spdif_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(5), 10, 2, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(2), 10, GFLAGS),
+	COMPOSITE_FRAC(0, "spdif_frac", "spdif_src", 0,
+			RK2928_CLKSEL_CON(9), 0,
+			RK2928_CLKGATE_CON(2), 12, GFLAGS),
+	MUX(SCLK_SPDIF, "sclk_spdif", mux_spdif_p, 0,
+			RK2928_CLKSEL_CON(5), 8, 2, MFLAGS),
+
+	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "xin12m", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(1), 5, GFLAGS),
+
+	COMPOSITE(SCLK_GPU, "sclk_gpu", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(34), 8, 2, MFLAGS, 0, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 13, GFLAGS),
+
+	COMPOSITE(SCLK_SPI, "sclk_spi", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(25), 8, 2, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(2), 9, GFLAGS),
+
+	COMPOSITE(SCLK_NANDC, "sclk_nandc", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(16), 8, 2, MFLAGS, 10, 5, DFLAGS,
+			RK2928_CLKGATE_CON(10), 4, GFLAGS),
+
+	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_apll_dpll_gpll_usb480m_p, 0,
+			RK2928_CLKSEL_CON(16), 0, 2, MFLAGS, 2, 5, DFLAGS,
+			RK2928_CLKGATE_CON(10), 5, GFLAGS),
+
+	COMPOSITE_NOGATE(0, "mac_pll_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(21), 0, 2, MFLAGS, 4, 5, DFLAGS),
+	MUX(SCLK_MACREF, "mac_clk_ref", mux_mac_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(21), 3, 1, MFLAGS),
+
+	COMPOSITE_NOMUX(SCLK_MAC, "mac_clk", "mac_clk_ref", 0,
+			RK2928_CLKSEL_CON(21), 9, 5, DFLAGS,
+			RK2928_CLKGATE_CON(2), 6, GFLAGS),
+
+	MUX(SCLK_HDMI, "dclk_hdmi", mux_dclk_p, 0,
+			RK2928_CLKSEL_CON(31), 0, 1, MFLAGS),
+
+	/*
+	 * Clock-Architecture Diagram 3
+	 */
+
+	/* aclk_cpu gates */
+	GATE(0, "sclk_intmem", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 12, GFLAGS),
+	GATE(0, "aclk_strc_sys", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 10, GFLAGS),
+
+	/* hclk_cpu gates */
+	GATE(HCLK_ROM, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 6, GFLAGS),
+
+	/* pclk_cpu gates */
+	GATE(PCLK_GRF, "pclk_grf", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 4, GFLAGS),
+	GATE(PCLK_DDRUPCTL, "pclk_ddrupctl", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 7, GFLAGS),
+	GATE(PCLK_ACODEC, "pclk_acodec", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 14, GFLAGS),
+	GATE(PCLK_HDMI, "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8, GFLAGS),
+
+	/* aclk_vio gates */
+	GATE(ACLK_VIO, "aclk_vio", "aclk_disp1_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(6), 13, GFLAGS),
+	GATE(ACLK_LCDC, "aclk_lcdc", "aclk_disp1_pre", 0, RK2928_CLKGATE_CON(9), 6, GFLAGS),
+
+	GATE(HCLK_VIO_BUS, "hclk_vio_bus", "hclk_disp_pre", 0, RK2928_CLKGATE_CON(6), 12, GFLAGS),
+	GATE(HCLK_LCDC, "hclk_lcdc", "hclk_disp_pre", 0, RK2928_CLKGATE_CON(9), 5, GFLAGS),
+
+	/* hclk_video gates */
+	GATE(HCLK_VCODEC, "hclk_vcodec", "hclk_disp_pre", 0, RK2928_CLKGATE_CON(3), 12, GFLAGS),
+
+	/* xin24m gates */
+	GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0, RK2928_CLKGATE_CON(10), 0, GFLAGS),
+	GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu", "xin24m", 0, RK2928_CLKGATE_CON(10), 1, GFLAGS),
+
+	/* aclk_peri gates */
+	GATE(0, "aclk_peri_axi_matrix", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 3, GFLAGS),
+	GATE(0, "aclk_cpu_peri", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 2, GFLAGS),
+	GATE(ACLK_DMAC2, "aclk_dmac2", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 1, GFLAGS),
+	GATE(0, "aclk_peri_niu", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 15, GFLAGS),
+
+	/* hclk_peri gates */
+	GATE(0, "hclk_peri_matrix", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 0, GFLAGS),
+	GATE(0, "hclk_usb_peri", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 13, GFLAGS),
+	GATE(0, "hclk_peri_arbi", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 14, GFLAGS),
+	GATE(HCLK_NANDC, "hclk_nandc", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 9, GFLAGS),
+	GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 10, GFLAGS),
+	GATE(HCLK_SDIO, "hclk_sdio", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 11, GFLAGS),
+	GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 0, GFLAGS),
+	GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 13, GFLAGS),
+	GATE(HCLK_OTG1, "hclk_otg1", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 3, GFLAGS),
+	GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 2, GFLAGS),
+	GATE(0, "hclk_sfc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS),
+	GATE(0, "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15, GFLAGS),
+
+	/* pclk_peri gates */
+	GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 1, GFLAGS),
+	GATE(0, "pclk_efuse", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 2, GFLAGS),
+	GATE(PCLK_TIMER, "pclk_timer", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 7, GFLAGS),
+	GATE(PCLK_PWM, "pclk_pwm", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 10, GFLAGS),
+	GATE(PCLK_SPI, "pclk_spi", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 12, GFLAGS),
+	GATE(PCLK_WDT, "pclk_wdt", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS),
+	GATE(PCLK_UART0, "pclk_uart0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS),
+	GATE(PCLK_UART1, "pclk_uart1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),
+	GATE(PCLK_UART2, "pclk_uart2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 2, GFLAGS),
+	GATE(PCLK_I2C0, "pclk_i2c0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 4, GFLAGS),
+	GATE(PCLK_I2C1, "pclk_i2c1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 5, GFLAGS),
+	GATE(PCLK_I2C2, "pclk_i2c2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 6, GFLAGS),
+	GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 9, GFLAGS),
+	GATE(PCLK_GPIO1, "pclk_gpio1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 10, GFLAGS),
+	GATE(PCLK_GPIO2, "pclk_gpio2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 11, GFLAGS),
+};
+
+static const char *const rk3036_critical_clocks[] __initconst = {
+	"aclk_cpu",
+	"aclk_peri",
+	"hclk_peri",
+	"pclk_peri",
+};
+
+static void __init rk3036_clk_init(struct device_node *np)
+{
+	void __iomem *reg_base;
+	struct clk *clk;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base) {
+		pr_err("%s: could not map cru region\n", __func__);
+		return;
+	}
+
+	rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
+
+	/* xin12m is created by an cru-internal divider */
+	clk = clk_register_fixed_factor(NULL, "xin12m", "xin24m", 0, 1, 2);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock xin12m: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock usb480m: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "ddrphy", "ddrphy2x", 0, 1, 2);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock ddrphy: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "hclk_vcodec_pre",
+					"aclk_vcodec", 0, 1, 4);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock hclk_vcodec_pre: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "sclk_macref_out",
+					"hclk_peri_src", 0, 1, 2);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock sclk_macref_out: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	rockchip_clk_register_plls(rk3036_pll_clks,
+				   ARRAY_SIZE(rk3036_pll_clks),
+				   RK3036_GRF_SOC_STATUS0);
+	rockchip_clk_register_branches(rk3036_clk_branches,
+				  ARRAY_SIZE(rk3036_clk_branches));
+	rockchip_clk_protect_critical(rk3036_critical_clocks,
+				      ARRAY_SIZE(rk3036_critical_clocks));
+
+	rockchip_clk_register_armclk(ARMCLK, "armclk",
+			mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
+			&rk3036_cpuclk_data, rk3036_cpuclk_rates,
+			ARRAY_SIZE(rk3036_cpuclk_rates));
+
+	rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
+				  ROCKCHIP_SOFTRST_HIWORD_MASK);
+
+	rockchip_register_restart_notifier(RK2928_GLB_SRST_FST, NULL);
+}
+CLK_OF_DECLARE(rk3036_cru, "rockchip,rk3036-cru", rk3036_clk_init);

drivers/clk/rockchip/clk-rk3188.c

@@ -750,7 +750,7 @@ static void __init rk3188_common_clk_init(struct device_node *np)
 	rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
 				  ROCKCHIP_SOFTRST_HIWORD_MASK);
 
-	rockchip_register_restart_notifier(RK2928_GLB_SRST_FST);
+	rockchip_register_restart_notifier(RK2928_GLB_SRST_FST, NULL);
 }
 
 static void __init rk3066a_clk_init(struct device_node *np)

drivers/clk/rockchip/clk-rk3228.c

@@ -0,0 +1,678 @@
+/*
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Xing Zheng <zhengxing@rock-chips.com>
+ *         Jeffy Chen <jeffy.chen@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+#include <dt-bindings/clock/rk3228-cru.h>
+#include "clk.h"
+
+#define RK3228_GRF_SOC_STATUS0	0x480
+
+enum rk3228_plls {
+	apll, dpll, cpll, gpll,
+};
+
+static struct rockchip_pll_rate_table rk3228_pll_rates[] = {
+	/* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
+	RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
+	RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0),
+	RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0),
+	RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0),
+	RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0),
+	RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0),
+	RK3036_PLL_RATE(  96000000, 1, 64, 4, 4, 1, 0),
+	{ /* sentinel */ },
+};
+
+#define RK3228_DIV_CPU_MASK		0x1f
+#define RK3228_DIV_CPU_SHIFT		8
+
+#define RK3228_DIV_PERI_MASK		0xf
+#define RK3228_DIV_PERI_SHIFT		0
+#define RK3228_DIV_ACLK_MASK		0x7
+#define RK3228_DIV_ACLK_SHIFT		4
+#define RK3228_DIV_HCLK_MASK		0x3
+#define RK3228_DIV_HCLK_SHIFT		8
+#define RK3228_DIV_PCLK_MASK		0x7
+#define RK3228_DIV_PCLK_SHIFT		12
+
+#define RK3228_CLKSEL1(_core_peri_div)					\
+	{									\
+		.reg = RK2928_CLKSEL_CON(1),					\
+		.val = HIWORD_UPDATE(_core_peri_div, RK3228_DIV_PERI_MASK,	\
+				RK3228_DIV_PERI_SHIFT)				\
+	}
+
+#define RK3228_CPUCLK_RATE(_prate, _core_peri_div)			\
+	{								\
+		.prate = _prate,					\
+		.divs = {						\
+			RK3228_CLKSEL1(_core_peri_div),		\
+		},							\
+	}
+
+static struct rockchip_cpuclk_rate_table rk3228_cpuclk_rates[] __initdata = {
+	RK3228_CPUCLK_RATE(816000000, 4),
+	RK3228_CPUCLK_RATE(600000000, 4),
+	RK3228_CPUCLK_RATE(312000000, 4),
+};
+
+static const struct rockchip_cpuclk_reg_data rk3228_cpuclk_data = {
+	.core_reg = RK2928_CLKSEL_CON(0),
+	.div_core_shift = 0,
+	.div_core_mask = 0x1f,
+	.mux_core_shift = 6,
+};
+
+PNAME(mux_pll_p)		= { "clk_24m", "xin24m" };
+
+PNAME(mux_ddrphy_p)		= { "dpll_ddr", "gpll_ddr", "apll_ddr" };
+PNAME(mux_armclk_p)		= { "apll_core", "gpll_core", "dpll_core" };
+PNAME(mux_usb480m_phy_p)	= { "usb480m_phy0", "usb480m_phy1" };
+PNAME(mux_usb480m_p)		= { "usb480m_phy", "xin24m" };
+PNAME(mux_hdmiphy_p)		= { "hdmiphy_phy", "xin24m" };
+PNAME(mux_aclk_cpu_src_p)	= { "cpll_aclk_cpu", "gpll_aclk_cpu", "hdmiphy_aclk_cpu" };
+
+PNAME(mux_pll_src_4plls_p)	= { "cpll", "gpll", "hdmiphy" "usb480m" };
+PNAME(mux_pll_src_3plls_p)	= { "cpll", "gpll", "hdmiphy" };
+PNAME(mux_pll_src_2plls_p)	= { "cpll", "gpll" };
+PNAME(mux_sclk_hdmi_cec_p)	= { "cpll", "gpll", "xin24m" };
+PNAME(mux_aclk_peri_src_p)	= { "cpll_peri", "gpll_peri", "hdmiphy_peri" };
+PNAME(mux_mmc_src_p)		= { "cpll", "gpll", "xin24m", "usb480m" };
+PNAME(mux_pll_src_cpll_gpll_usb480m_p)	= { "cpll", "gpll", "usb480m" };
+
+PNAME(mux_sclk_rga_p)		= { "gpll", "cpll", "sclk_rga_src" };
+
+PNAME(mux_sclk_vop_src_p)	= { "gpll_vop", "cpll_vop" };
+PNAME(mux_dclk_vop_p)		= { "hdmiphy", "sclk_vop_pre" };
+
+PNAME(mux_i2s0_p)		= { "i2s0_src", "i2s0_frac", "ext_i2s", "xin12m" };
+PNAME(mux_i2s1_pre_p)		= { "i2s1_src", "i2s1_frac", "ext_i2s", "xin12m" };
+PNAME(mux_i2s_out_p)		= { "i2s1_pre", "xin12m" };
+PNAME(mux_i2s2_p)		= { "i2s2_src", "i2s2_frac", "xin12m" };
+PNAME(mux_sclk_spdif_p)		= { "sclk_spdif_src", "spdif_frac", "xin12m" };
+
+PNAME(mux_aclk_gpu_pre_p)	= { "cpll_gpu", "gpll_gpu", "hdmiphy_gpu", "usb480m_gpu" };
+
+PNAME(mux_uart0_p)		= { "uart0_src", "uart0_frac", "xin24m" };
+PNAME(mux_uart1_p)		= { "uart1_src", "uart1_frac", "xin24m" };
+PNAME(mux_uart2_p)		= { "uart2_src", "uart2_frac", "xin24m" };
+
+PNAME(mux_sclk_macphy_50m_p)	= { "ext_gmac", "phy_50m_out" };
+PNAME(mux_sclk_gmac_pre_p)	= { "sclk_gmac_src", "sclk_macphy_50m" };
+PNAME(mux_sclk_macphy_p)	= { "sclk_gmac_src", "ext_gmac" };
+
+static struct rockchip_pll_clock rk3228_pll_clks[] __initdata = {
+	[apll] = PLL(pll_rk3036, PLL_APLL, "apll", mux_pll_p, 0, RK2928_PLL_CON(0),
+		     RK2928_MODE_CON, 0, 7, 0, rk3228_pll_rates),
+	[dpll] = PLL(pll_rk3036, PLL_DPLL, "dpll", mux_pll_p, 0, RK2928_PLL_CON(3),
+		     RK2928_MODE_CON, 4, 6, 0, NULL),
+	[cpll] = PLL(pll_rk3036, PLL_CPLL, "cpll", mux_pll_p, 0, RK2928_PLL_CON(6),
+		     RK2928_MODE_CON, 8, 8, 0, NULL),
+	[gpll] = PLL(pll_rk3036, PLL_GPLL, "gpll", mux_pll_p, 0, RK2928_PLL_CON(9),
+		     RK2928_MODE_CON, 12, 9, ROCKCHIP_PLL_SYNC_RATE, rk3228_pll_rates),
+};
+
+#define MFLAGS CLK_MUX_HIWORD_MASK
+#define DFLAGS CLK_DIVIDER_HIWORD_MASK
+#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
+
+static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
+	/*
+	 * Clock-Architecture Diagram 1
+	 */
+
+	DIV(0, "clk_24m", "xin24m", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(4), 8, 5, DFLAGS),
+
+	/* PD_DDR */
+	GATE(0, "apll_ddr", "apll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 2, GFLAGS),
+	GATE(0, "dpll_ddr", "dpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 2, GFLAGS),
+	GATE(0, "gpll_ddr", "gpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 2, GFLAGS),
+	COMPOSITE(0, "ddrphy4x", mux_ddrphy_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(26), 8, 2, MFLAGS, 0, 3, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+			RK2928_CLKGATE_CON(7), 1, GFLAGS),
+	GATE(0, "ddrc", "ddrphy_pre", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(8), 5, GFLAGS),
+	GATE(0, "ddrphy", "ddrphy_pre", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(7), 0, GFLAGS),
+
+	/* PD_CORE */
+	GATE(0, "dpll_core", "dpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 6, GFLAGS),
+	GATE(0, "apll_core", "apll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 6, GFLAGS),
+	GATE(0, "gpll_core", "gpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 6, GFLAGS),
+	COMPOSITE_NOMUX(0, "pclk_dbg", "armclk", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 0, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(4), 1, GFLAGS),
+	COMPOSITE_NOMUX(0, "armcore", "armclk", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 4, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(4), 0, GFLAGS),
+
+	/* PD_MISC */
+	MUX(0, "hdmiphy", mux_hdmiphy_p, CLK_SET_RATE_PARENT,
+			RK2928_MISC_CON, 13, 1, MFLAGS),
+	MUX(0, "usb480m_phy", mux_usb480m_phy_p, CLK_SET_RATE_PARENT,
+			RK2928_MISC_CON, 14, 1, MFLAGS),
+	MUX(0, "usb480m", mux_usb480m_p, CLK_SET_RATE_PARENT,
+			RK2928_MISC_CON, 15, 1, MFLAGS),
+
+	/* PD_BUS */
+	GATE(0, "hdmiphy_aclk_cpu", "hdmiphy", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 1, GFLAGS),
+	GATE(0, "gpll_aclk_cpu", "gpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 1, GFLAGS),
+	GATE(0, "cpll_aclk_cpu", "cpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 1, GFLAGS),
+	COMPOSITE_NOGATE(0, "aclk_cpu_src", mux_aclk_cpu_src_p, 0,
+			RK2928_CLKSEL_CON(0), 13, 2, MFLAGS, 8, 5, DFLAGS),
+	GATE(ARMCLK, "aclk_cpu", "aclk_cpu_src", 0,
+			RK2928_CLKGATE_CON(6), 0, GFLAGS),
+	COMPOSITE_NOMUX(0, "hclk_cpu", "aclk_cpu_src", 0,
+			RK2928_CLKSEL_CON(1), 8, 2, DFLAGS,
+			RK2928_CLKGATE_CON(6), 1, GFLAGS),
+	COMPOSITE_NOMUX(0, "pclk_bus_src", "aclk_cpu_src", 0,
+			RK2928_CLKSEL_CON(1), 12, 3, DFLAGS,
+			RK2928_CLKGATE_CON(6), 2, GFLAGS),
+	GATE(0, "pclk_cpu", "pclk_bus_src", 0,
+			RK2928_CLKGATE_CON(6), 3, GFLAGS),
+	GATE(0, "pclk_phy_pre", "pclk_bus_src", 0,
+			RK2928_CLKGATE_CON(6), 4, GFLAGS),
+	GATE(0, "pclk_ddr_pre", "pclk_bus_src", 0,
+			RK2928_CLKGATE_CON(6), 13, GFLAGS),
+
+	/* PD_VIDEO */
+	COMPOSITE(0, "aclk_vpu_pre", mux_pll_src_4plls_p, 0,
+			RK2928_CLKSEL_CON(32), 5, 2, MFLAGS, 0, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 11, GFLAGS),
+	GATE(0, "hclk_vpu_src", "aclk_vpu_pre", 0,
+			RK2928_CLKGATE_CON(4), 4, GFLAGS),
+
+	COMPOSITE(0, "aclk_rkvdec_pre", mux_pll_src_4plls_p, 0,
+			RK2928_CLKSEL_CON(28), 6, 2, MFLAGS, 0, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 2, GFLAGS),
+	GATE(0, "hclk_rkvdec_src", "aclk_rkvdec_pre", 0,
+			RK2928_CLKGATE_CON(4), 5, GFLAGS),
+
+	COMPOSITE(0, "sclk_vdec_cabac", mux_pll_src_4plls_p, 0,
+			RK2928_CLKSEL_CON(28), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 3, GFLAGS),
+
+	COMPOSITE(0, "sclk_vdec_core", mux_pll_src_4plls_p, 0,
+			RK2928_CLKSEL_CON(34), 13, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 4, GFLAGS),
+
+	/* PD_VIO */
+	COMPOSITE(0, "aclk_iep_pre", mux_pll_src_4plls_p, 0,
+			RK2928_CLKSEL_CON(31), 5, 2, MFLAGS, 0, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 0, GFLAGS),
+	DIV(0, "hclk_vio_pre", "aclk_iep_pre", 0,
+			RK2928_CLKSEL_CON(2), 0, 5, DFLAGS),
+
+	COMPOSITE(0, "aclk_hdcp_pre", mux_pll_src_4plls_p, 0,
+			RK2928_CLKSEL_CON(31), 13, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(1), 4, GFLAGS),
+
+	MUX(0, "sclk_rga_src", mux_pll_src_4plls_p, 0,
+			RK2928_CLKSEL_CON(33), 13, 2, MFLAGS),
+	COMPOSITE_NOMUX(0, "aclk_rga_pre", "sclk_rga_src", 0,
+			RK2928_CLKSEL_CON(33), 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(1), 2, GFLAGS),
+	COMPOSITE(0, "sclk_rga", mux_sclk_rga_p, 0,
+			RK2928_CLKSEL_CON(22), 5, 2, MFLAGS, 0, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 6, GFLAGS),
+
+	COMPOSITE(0, "aclk_vop_pre", mux_pll_src_4plls_p, 0,
+			RK2928_CLKSEL_CON(33), 5, 2, MFLAGS, 0, 5, DFLAGS,
+			RK2928_CLKGATE_CON(1), 1, GFLAGS),
+
+	COMPOSITE(0, "sclk_hdcp", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(23), 14, 2, MFLAGS, 8, 6, DFLAGS,
+			RK2928_CLKGATE_CON(3), 5, GFLAGS),
+
+	GATE(0, "sclk_hdmi_hdcp", "xin24m", 0,
+			RK2928_CLKGATE_CON(3), 7, GFLAGS),
+
+	COMPOSITE(0, "sclk_hdmi_cec", mux_sclk_hdmi_cec_p, 0,
+			RK2928_CLKSEL_CON(21), 14, 2, MFLAGS, 0, 14, DFLAGS,
+			RK2928_CLKGATE_CON(3), 8, GFLAGS),
+
+	/* PD_PERI */
+	GATE(0, "cpll_peri", "cpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(2), 0, GFLAGS),
+	GATE(0, "gpll_peri", "gpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(2), 0, GFLAGS),
+	GATE(0, "hdmiphy_peri", "hdmiphy", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(2), 0, GFLAGS),
+	COMPOSITE_NOGATE(0, "aclk_peri_src", mux_aclk_peri_src_p, 0,
+			RK2928_CLKSEL_CON(10), 10, 2, MFLAGS, 0, 5, DFLAGS),
+	COMPOSITE_NOMUX(PCLK_PERI, "pclk_peri", "aclk_peri_src", 0,
+			RK2928_CLKSEL_CON(10), 12, 3, DFLAGS,
+			RK2928_CLKGATE_CON(5), 2, GFLAGS),
+	COMPOSITE_NOMUX(HCLK_PERI, "hclk_peri", "aclk_peri_src", 0,
+			RK2928_CLKSEL_CON(10), 8, 2, DFLAGS,
+			RK2928_CLKGATE_CON(5), 1, GFLAGS),
+	GATE(ACLK_PERI, "aclk_peri", "aclk_peri_src", 0,
+			RK2928_CLKGATE_CON(5), 0, GFLAGS),
+
+	GATE(SCLK_TIMER0, "sclk_timer0", "xin24m", 0,
+			RK2928_CLKGATE_CON(6), 5, GFLAGS),
+	GATE(SCLK_TIMER1, "sclk_timer1", "xin24m", 0,
+			RK2928_CLKGATE_CON(6), 6, GFLAGS),
+	GATE(SCLK_TIMER2, "sclk_timer2", "xin24m", 0,
+			RK2928_CLKGATE_CON(6), 7, GFLAGS),
+	GATE(SCLK_TIMER3, "sclk_timer3", "xin24m", 0,
+			RK2928_CLKGATE_CON(6), 8, GFLAGS),
+	GATE(SCLK_TIMER4, "sclk_timer4", "xin24m", 0,
+			RK2928_CLKGATE_CON(6), 9, GFLAGS),
+	GATE(SCLK_TIMER5, "sclk_timer5", "xin24m", 0,
+			RK2928_CLKGATE_CON(6), 10, GFLAGS),
+
+	COMPOSITE(0, "sclk_crypto", mux_pll_src_2plls_p, 0,
+			RK2928_CLKSEL_CON(24), 5, 1, MFLAGS, 0, 5, DFLAGS,
+			RK2928_CLKGATE_CON(2), 7, GFLAGS),
+
+	COMPOSITE(0, "sclk_tsp", mux_pll_src_2plls_p, 0,
+			RK2928_CLKSEL_CON(22), 15, 1, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(2), 6, GFLAGS),
+
+	GATE(0, "sclk_hsadc", "ext_hsadc", 0,
+			RK3288_CLKGATE_CON(10), 12, GFLAGS),
+
+	COMPOSITE(0, "sclk_wifi", mux_pll_src_cpll_gpll_usb480m_p, 0,
+			RK2928_CLKSEL_CON(23), 5, 2, MFLAGS, 0, 6, DFLAGS,
+			RK2928_CLKGATE_CON(2), 15, GFLAGS),
+
+	COMPOSITE(SCLK_SDMMC, "sclk_sdmmc0", mux_mmc_src_p, 0,
+			RK2928_CLKSEL_CON(11), 8, 2, MFLAGS, 0, 8, DFLAGS,
+			RK2928_CLKGATE_CON(2), 11, GFLAGS),
+
+	COMPOSITE_NODIV(0, "sclk_sdio_src", mux_mmc_src_p, 0,
+			RK2928_CLKSEL_CON(11), 10, 2, MFLAGS,
+			RK2928_CLKGATE_CON(2), 13, GFLAGS),
+	DIV(SCLK_SDIO, "sclk_sdio", "sclk_sdio_src", 0,
+			RK2928_CLKSEL_CON(12), 0, 8, DFLAGS),
+
+	COMPOSITE_NODIV(0, "sclk_emmc_src", mux_mmc_src_p, 0,
+			RK2928_CLKSEL_CON(11), 12, 2, MFLAGS,
+			RK2928_CLKGATE_CON(2), 14, GFLAGS),
+	DIV(SCLK_EMMC, "sclk_emmc", "sclk_emmc_src", 0,
+			RK2928_CLKSEL_CON(12), 8, 8, DFLAGS),
+
+	/*
+	 * Clock-Architecture Diagram 2
+	 */
+
+	GATE(0, "gpll_vop", "gpll", 0,
+			RK2928_CLKGATE_CON(3), 1, GFLAGS),
+	GATE(0, "cpll_vop", "cpll", 0,
+			RK2928_CLKGATE_CON(3), 1, GFLAGS),
+	MUX(0, "sclk_vop_src", mux_sclk_vop_src_p, 0,
+			RK2928_CLKSEL_CON(27), 0, 1, MFLAGS),
+	DIV(0, "dclk_hdmiphy", "sclk_vop_src", 0,
+			RK2928_CLKSEL_CON(29), 0, 3, DFLAGS),
+	DIV(0, "sclk_vop_pre", "sclk_vop_src", 0,
+			RK2928_CLKSEL_CON(27), 8, 8, DFLAGS),
+	MUX(0, "dclk_vop", mux_dclk_vop_p, 0,
+			RK2928_CLKSEL_CON(27), 1, 1, MFLAGS),
+
+	COMPOSITE(0, "i2s0_src", mux_pll_src_2plls_p, 0,
+			RK2928_CLKSEL_CON(9), 15, 1, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(0), 3, GFLAGS),
+	COMPOSITE_FRAC(0, "i2s0_frac", "i2s0_src", CLK_SET_RATE_PARENT,
+			RK3288_CLKSEL_CON(8), 0,
+			RK3288_CLKGATE_CON(0), 4, GFLAGS),
+	COMPOSITE_NODIV(SCLK_I2S0, "sclk_i2s0", mux_i2s0_p, 0,
+			RK2928_CLKSEL_CON(9), 8, 2, MFLAGS,
+			RK2928_CLKGATE_CON(0), 5, GFLAGS),
+
+	COMPOSITE(0, "i2s1_src", mux_pll_src_2plls_p, 0,
+			RK2928_CLKSEL_CON(3), 15, 1, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(0), 10, GFLAGS),
+	COMPOSITE_FRAC(0, "i2s1_frac", "i2s1_src", CLK_SET_RATE_PARENT,
+			RK3288_CLKSEL_CON(7), 0,
+			RK3288_CLKGATE_CON(0), 11, GFLAGS),
+	MUX(0, "i2s1_pre", mux_i2s1_pre_p, 0,
+			RK2928_CLKSEL_CON(3), 8, 2, MFLAGS),
+	GATE(SCLK_I2S1, "sclk_i2s1", "i2s1_pre", 0,
+			RK2928_CLKGATE_CON(0), 14, GFLAGS),
+	COMPOSITE_NODIV(SCLK_I2S_OUT, "i2s_out", mux_i2s_out_p, 0,
+			RK2928_CLKSEL_CON(3), 12, 1, MFLAGS,
+			RK2928_CLKGATE_CON(0), 13, GFLAGS),
+
+	COMPOSITE(0, "i2s2_src", mux_pll_src_2plls_p, 0,
+			RK2928_CLKSEL_CON(16), 15, 1, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(0), 7, GFLAGS),
+	COMPOSITE_FRAC(0, "i2s2_frac", "i2s2_src", CLK_SET_RATE_PARENT,
+			RK3288_CLKSEL_CON(30), 0,
+			RK3288_CLKGATE_CON(0), 8, GFLAGS),
+	COMPOSITE_NODIV(SCLK_I2S2, "sclk_i2s2", mux_i2s2_p, 0,
+			RK2928_CLKSEL_CON(16), 8, 2, MFLAGS,
+			RK2928_CLKGATE_CON(0), 9, GFLAGS),
+
+	COMPOSITE(0, "sclk_spdif_src", mux_pll_src_2plls_p, 0,
+			RK2928_CLKSEL_CON(6), 15, 1, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(2), 10, GFLAGS),
+	COMPOSITE_FRAC(0, "spdif_frac", "sclk_spdif_src", CLK_SET_RATE_PARENT,
+			RK3288_CLKSEL_CON(20), 0,
+			RK3288_CLKGATE_CON(2), 12, GFLAGS),
+	MUX(SCLK_SPDIF, "sclk_spdif", mux_sclk_spdif_p, 0,
+			RK2928_CLKSEL_CON(6), 8, 2, MFLAGS),
+
+	GATE(0, "jtag", "ext_jtag", 0,
+			RK2928_CLKGATE_CON(1), 3, GFLAGS),
+
+	GATE(0, "sclk_otgphy0", "xin24m", 0,
+			RK2928_CLKGATE_CON(1), 5, GFLAGS),
+	GATE(0, "sclk_otgphy1", "xin24m", 0,
+			RK2928_CLKGATE_CON(1), 6, GFLAGS),
+
+	COMPOSITE_NOMUX(0, "sclk_tsadc", "xin24m", 0,
+			RK2928_CLKSEL_CON(24), 6, 10, DFLAGS,
+			RK2928_CLKGATE_CON(2), 8, GFLAGS),
+
+	GATE(0, "cpll_gpu", "cpll", 0,
+			RK2928_CLKGATE_CON(3), 13, GFLAGS),
+	GATE(0, "gpll_gpu", "gpll", 0,
+			RK2928_CLKGATE_CON(3), 13, GFLAGS),
+	GATE(0, "hdmiphy_gpu", "hdmiphy", 0,
+			RK2928_CLKGATE_CON(3), 13, GFLAGS),
+	GATE(0, "usb480m_gpu", "usb480m", 0,
+			RK2928_CLKGATE_CON(3), 13, GFLAGS),
+	COMPOSITE_NOGATE(0, "aclk_gpu_pre", mux_aclk_gpu_pre_p, 0,
+			RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS),
+
+	COMPOSITE(SCLK_SPI0, "sclk_spi0", mux_pll_src_2plls_p, 0,
+			RK2928_CLKSEL_CON(25), 8, 1, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(2), 9, GFLAGS),
+
+	/* PD_UART */
+	COMPOSITE(0, "uart0_src", mux_pll_src_cpll_gpll_usb480m_p, 0,
+			RK2928_CLKSEL_CON(13), 12, 2, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+	COMPOSITE(0, "uart1_src", mux_pll_src_cpll_gpll_usb480m_p, 0,
+			RK2928_CLKSEL_CON(14), 12, 2, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 10, GFLAGS),
+	COMPOSITE(0, "uart2_src", mux_pll_src_cpll_gpll_usb480m_p,
+			0, RK2928_CLKSEL_CON(15), 12, 2,
+			MFLAGS, 0, 7, DFLAGS, RK2928_CLKGATE_CON(1), 12, GFLAGS),
+	COMPOSITE_FRAC(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(17), 0,
+			RK2928_CLKGATE_CON(1), 9, GFLAGS),
+	COMPOSITE_FRAC(0, "uart1_frac", "uart1_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(18), 0,
+			RK2928_CLKGATE_CON(1), 11, GFLAGS),
+	COMPOSITE_FRAC(0, "uart2_frac", "uart2_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(19), 0,
+			RK2928_CLKGATE_CON(1), 13, GFLAGS),
+	MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(13), 8, 2, MFLAGS),
+	MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(14), 8, 2, MFLAGS),
+	MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(15), 8, 2, MFLAGS),
+
+	COMPOSITE(SCLK_NANDC, "sclk_nandc", mux_pll_src_2plls_p, 0,
+			RK2928_CLKSEL_CON(2), 14, 1, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(1), 0, GFLAGS),
+
+	COMPOSITE(0, "sclk_gmac_src", mux_pll_src_2plls_p, 0,
+			RK2928_CLKSEL_CON(5), 7, 1, MFLAGS, 0, 5, DFLAGS,
+			RK2928_CLKGATE_CON(1), 7, GFLAGS),
+	MUX(0, "sclk_macphy_50m", mux_sclk_macphy_50m_p, 0,
+			RK2928_CLKSEL_CON(29), 10, 1, MFLAGS),
+	MUX(0, "sclk_gmac_pre", mux_sclk_gmac_pre_p, 0,
+			RK2928_CLKSEL_CON(5), 5, 1, MFLAGS),
+	GATE(0, "sclk_mac_refout", "sclk_gmac_pre", 0,
+			RK2928_CLKGATE_CON(5), 4, GFLAGS),
+	GATE(0, "sclk_mac_ref", "sclk_gmac_pre", 0,
+			RK2928_CLKGATE_CON(5), 3, GFLAGS),
+	GATE(0, "sclk_mac_rx", "sclk_gmac_pre", 0,
+			RK2928_CLKGATE_CON(5), 5, GFLAGS),
+	GATE(0, "sclk_mac_tx", "sclk_gmac_pre", 0,
+			RK2928_CLKGATE_CON(5), 6, GFLAGS),
+	COMPOSITE(0, "sclk_macphy", mux_sclk_macphy_p, 0,
+			RK2928_CLKSEL_CON(29), 12, 1, MFLAGS, 8, 2, DFLAGS,
+			RK2928_CLKGATE_CON(5), 7, GFLAGS),
+	COMPOSITE(0, "sclk_gmac_out", mux_pll_src_2plls_p, 0,
+			RK2928_CLKSEL_CON(5), 15, 1, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(2), 2, GFLAGS),
+
+	/*
+	 * Clock-Architecture Diagram 3
+	 */
+
+	/* PD_VOP */
+	GATE(0, "aclk_rga", "aclk_rga_pre", 0, RK2928_CLKGATE_CON(13), 0, GFLAGS),
+	GATE(0, "aclk_rga_noc", "aclk_rga_pre", 0, RK2928_CLKGATE_CON(13), 11, GFLAGS),
+	GATE(0, "aclk_iep", "aclk_iep_pre", 0, RK2928_CLKGATE_CON(13), 2, GFLAGS),
+	GATE(0, "aclk_iep_noc", "aclk_iep_pre", 0, RK2928_CLKGATE_CON(13), 9, GFLAGS),
+
+	GATE(0, "aclk_vop", "aclk_vop_pre", 0, RK2928_CLKGATE_CON(13), 5, GFLAGS),
+	GATE(0, "aclk_vop_noc", "aclk_vop_pre", 0, RK2928_CLKGATE_CON(13), 12, GFLAGS),
+
+	GATE(0, "aclk_hdcp", "aclk_hdcp_pre", 0, RK2928_CLKGATE_CON(14), 10, GFLAGS),
+	GATE(0, "aclk_hdcp_noc", "aclk_hdcp_pre", 0, RK2928_CLKGATE_CON(13), 10, GFLAGS),
+
+	GATE(0, "hclk_rga", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 1, GFLAGS),
+	GATE(0, "hclk_iep", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 3, GFLAGS),
+	GATE(0, "hclk_vop", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 6, GFLAGS),
+	GATE(0, "hclk_vio_ahb_arbi", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 7, GFLAGS),
+	GATE(0, "hclk_vio_noc", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 8, GFLAGS),
+	GATE(0, "hclk_vop_noc", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 13, GFLAGS),
+	GATE(0, "hclk_vio_h2p", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 7, GFLAGS),
+	GATE(0, "hclk_hdcp_mmu", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 12, GFLAGS),
+	GATE(0, "pclk_hdmi_ctrl", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 6, GFLAGS),
+	GATE(0, "pclk_vio_h2p", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 8, GFLAGS),
+	GATE(0, "pclk_hdcp", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 11, GFLAGS),
+
+	/* PD_PERI */
+	GATE(0, "aclk_peri_noc", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(12), 0, GFLAGS),
+	GATE(0, "aclk_gmac", "aclk_peri", 0, RK2928_CLKGATE_CON(11), 4, GFLAGS),
+
+	GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 0, GFLAGS),
+	GATE(HCLK_SDIO, "hclk_sdio", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 1, GFLAGS),
+	GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 2, GFLAGS),
+	GATE(HCLK_NANDC, "hclk_nandc", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 3, GFLAGS),
+	GATE(0, "hclk_host0", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 6, GFLAGS),
+	GATE(0, "hclk_host0_arb", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 7, GFLAGS),
+	GATE(0, "hclk_host1", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 8, GFLAGS),
+	GATE(0, "hclk_host1_arb", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 9, GFLAGS),
+	GATE(0, "hclk_host2", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 10, GFLAGS),
+	GATE(0, "hclk_otg", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 12, GFLAGS),
+	GATE(0, "hclk_otg_pmu", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 13, GFLAGS),
+	GATE(0, "hclk_host2_arb", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 14, GFLAGS),
+	GATE(0, "hclk_peri_noc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(12), 1, GFLAGS),
+
+	GATE(0, "pclk_gmac", "pclk_peri", 0, RK2928_CLKGATE_CON(11), 5, GFLAGS),
+	GATE(0, "pclk_peri_noc", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(12), 2, GFLAGS),
+
+	/* PD_GPU */
+	GATE(0, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 14, GFLAGS),
+	GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 15, GFLAGS),
+
+	/* PD_BUS */
+	GATE(0, "sclk_initmem_mbist", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),
+	GATE(0, "aclk_initmem", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS),
+	GATE(ACLK_DMAC, "aclk_dmac_bus", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 2, GFLAGS),
+	GATE(0, "aclk_bus_noc", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 1, GFLAGS),
+
+	GATE(0, "hclk_rom", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 3, GFLAGS),
+	GATE(0, "hclk_i2s0_8ch", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 7, GFLAGS),
+	GATE(0, "hclk_i2s1_8ch", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 8, GFLAGS),
+	GATE(0, "hclk_i2s2_2ch", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 9, GFLAGS),
+	GATE(0, "hclk_spdif_8ch", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 10, GFLAGS),
+	GATE(0, "hclk_tsp", "hclk_cpu", 0, RK2928_CLKGATE_CON(10), 11, GFLAGS),
+	GATE(0, "hclk_crypto_mst", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 11, GFLAGS),
+	GATE(0, "hclk_crypto_slv", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 12, GFLAGS),
+
+	GATE(0, "pclk_ddrupctl", "pclk_ddr_pre", 0, RK2928_CLKGATE_CON(8), 4, GFLAGS),
+	GATE(0, "pclk_ddrmon", "pclk_ddr_pre", 0, RK2928_CLKGATE_CON(8), 6, GFLAGS),
+	GATE(0, "pclk_msch_noc", "pclk_ddr_pre", 0, RK2928_CLKGATE_CON(10), 2, GFLAGS),
+
+	GATE(0, "pclk_efuse_1024", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 13, GFLAGS),
+	GATE(0, "pclk_efuse_256", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 14, GFLAGS),
+	GATE(PCLK_I2C0, "pclk_i2c0", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 15, GFLAGS),
+	GATE(PCLK_I2C1, "pclk_i2c1", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 0, GFLAGS),
+	GATE(PCLK_I2C2, "pclk_i2c2", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 1, GFLAGS),
+	GATE(PCLK_I2C3, "pclk_i2c3", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 2, GFLAGS),
+	GATE(PCLK_TIMER, "pclk_timer0", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 4, GFLAGS),
+	GATE(0, "pclk_stimer", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 5, GFLAGS),
+	GATE(PCLK_SPI0, "pclk_spi0", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 6, GFLAGS),
+	GATE(PCLK_PWM, "pclk_rk_pwm", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 7, GFLAGS),
+	GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 8, GFLAGS),
+	GATE(PCLK_GPIO1, "pclk_gpio1", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 9, GFLAGS),
+	GATE(PCLK_GPIO2, "pclk_gpio2", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 10, GFLAGS),
+	GATE(PCLK_GPIO3, "pclk_gpio3", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 11, GFLAGS),
+	GATE(PCLK_UART0, "pclk_uart0", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 12, GFLAGS),
+	GATE(PCLK_UART1, "pclk_uart1", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 13, GFLAGS),
+	GATE(PCLK_UART2, "pclk_uart2", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 14, GFLAGS),
+	GATE(0, "pclk_tsadc", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 15, GFLAGS),
+	GATE(PCLK_GRF, "pclk_grf", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 0, GFLAGS),
+	GATE(0, "pclk_cru", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 1, GFLAGS),
+	GATE(0, "pclk_sgrf", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 2, GFLAGS),
+	GATE(0, "pclk_sim", "pclk_cpu", 0, RK2928_CLKGATE_CON(10), 3, GFLAGS),
+
+	GATE(0, "pclk_ddrphy", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 3, GFLAGS),
+	GATE(0, "pclk_acodecphy", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 5, GFLAGS),
+	GATE(0, "pclk_hdmiphy", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 7, GFLAGS),
+	GATE(0, "pclk_vdacphy", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 8, GFLAGS),
+	GATE(0, "pclk_phy_noc", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 9, GFLAGS),
+
+	GATE(0, "aclk_vpu", "aclk_vpu_pre", 0, RK2928_CLKGATE_CON(15), 0, GFLAGS),
+	GATE(0, "aclk_vpu_noc", "aclk_vpu_pre", 0, RK2928_CLKGATE_CON(15), 4, GFLAGS),
+	GATE(0, "aclk_rkvdec", "aclk_rkvdec_pre", 0, RK2928_CLKGATE_CON(15), 2, GFLAGS),
+	GATE(0, "aclk_rkvdec_noc", "aclk_rkvdec_pre", 0, RK2928_CLKGATE_CON(15), 6, GFLAGS),
+	GATE(0, "hclk_vpu", "hclk_vpu_pre", 0, RK2928_CLKGATE_CON(15), 1, GFLAGS),
+	GATE(0, "hclk_vpu_noc", "hclk_vpu_pre", 0, RK2928_CLKGATE_CON(15), 5, GFLAGS),
+	GATE(0, "hclk_rkvdec", "hclk_rkvdec_pre", 0, RK2928_CLKGATE_CON(15), 3, GFLAGS),
+	GATE(0, "hclk_rkvdec_noc", "hclk_rkvdec_pre", 0, RK2928_CLKGATE_CON(15), 7, GFLAGS),
+
+	/* PD_MMC */
+	MMC(SCLK_SDMMC_DRV,    "sdmmc_drv",    "sclk_sdmmc", RK3228_SDMMC_CON0, 1),
+	MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "sclk_sdmmc", RK3228_SDMMC_CON1, 1),
+
+	MMC(SCLK_SDIO_DRV,     "sdio_drv",     "sclk_sdio",  RK3228_SDIO_CON0,  1),
+	MMC(SCLK_SDIO_SAMPLE,  "sdio_sample",  "sclk_sdio",  RK3228_SDIO_CON1,  1),
+
+	MMC(SCLK_EMMC_DRV,     "emmc_drv",     "sclk_emmc",  RK3228_EMMC_CON0,  1),
+	MMC(SCLK_EMMC_SAMPLE,  "emmc_sample",  "sclk_emmc",  RK3228_EMMC_CON1,  1),
+};
+
+static const char *const rk3228_critical_clocks[] __initconst = {
+	"aclk_cpu",
+	"aclk_peri",
+	"hclk_peri",
+	"pclk_peri",
+};
+
+static void __init rk3228_clk_init(struct device_node *np)
+{
+	void __iomem *reg_base;
+	struct clk *clk;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base) {
+		pr_err("%s: could not map cru region\n", __func__);
+		return;
+	}
+
+	rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
+
+	/* xin12m is created by an cru-internal divider */
+	clk = clk_register_fixed_factor(NULL, "xin12m", "xin24m", 0, 1, 2);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock xin12m: %ld\n",
+				__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "ddrphy_pre", "ddrphy4x", 0, 1, 4);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock ddrphy_pre: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "hclk_vpu_pre",
+					"hclk_vpu_src", 0, 1, 4);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock hclk_vpu_pre: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "hclk_rkvdec_pre",
+					"hclk_rkvdec_src", 0, 1, 4);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock hclk_rkvdec_pre: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	rockchip_clk_register_plls(rk3228_pll_clks,
+				   ARRAY_SIZE(rk3228_pll_clks),
+				   RK3228_GRF_SOC_STATUS0);
+	rockchip_clk_register_branches(rk3228_clk_branches,
+				  ARRAY_SIZE(rk3228_clk_branches));
+	rockchip_clk_protect_critical(rk3228_critical_clocks,
+				      ARRAY_SIZE(rk3228_critical_clocks));
+
+	rockchip_clk_register_armclk(ARMCLK, "armclk",
+			mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
+			&rk3228_cpuclk_data, rk3228_cpuclk_rates,
+			ARRAY_SIZE(rk3228_cpuclk_rates));
+
+	rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
+				  ROCKCHIP_SOFTRST_HIWORD_MASK);
+
+	rockchip_register_restart_notifier(RK3228_GLB_SRST_FST, NULL);
+}
+CLK_OF_DECLARE(rk3228_cru, "rockchip,rk3228-cru", rk3228_clk_init);

drivers/clk/rockchip/clk-rk3288.c

@@ -295,7 +295,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 			RK3288_CLKGATE_CON(0), 4, GFLAGS),
 	GATE(0, "c2c_host", "aclk_cpu_src", 0,
 			RK3288_CLKGATE_CON(13), 8, GFLAGS),
-	COMPOSITE_NOMUX(0, "crypto", "aclk_cpu_pre", 0,
+	COMPOSITE_NOMUX(SCLK_CRYPTO, "crypto", "aclk_cpu_pre", 0,
 			RK3288_CLKSEL_CON(26), 6, 2, DFLAGS,
 			RK3288_CLKGATE_CON(5), 4, GFLAGS),
 	GATE(0, "aclk_bus_2pmu", "aclk_cpu_pre", CLK_IGNORE_UNUSED,
@@ -644,10 +644,10 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	GATE(PCLK_PUBL0, "pclk_publ0", "pclk_cpu", 0, RK3288_CLKGATE_CON(10), 15, GFLAGS),
 	GATE(PCLK_DDRUPCTL1, "pclk_ddrupctl1", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 0, GFLAGS),
 	GATE(PCLK_PUBL1, "pclk_publ1", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 1, GFLAGS),
-	GATE(0, "pclk_efuse_1024", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 2, GFLAGS),
+	GATE(PCLK_EFUSE1024, "pclk_efuse_1024", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 2, GFLAGS),
 	GATE(PCLK_TZPC, "pclk_tzpc", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 3, GFLAGS),
 	GATE(PCLK_UART2, "pclk_uart2", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 9, GFLAGS),
-	GATE(0, "pclk_efuse_256", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 10, GFLAGS),
+	GATE(PCLK_EFUSE256, "pclk_efuse_256", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 10, GFLAGS),
 	GATE(PCLK_RKPWM, "pclk_rkpwm", "pclk_cpu", CLK_IGNORE_UNUSED, RK3288_CLKGATE_CON(11), 11, GFLAGS),
 
 	/* ddrctrl [DDR Controller PHY clock] gates */
@@ -709,7 +709,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	GATE(SCLK_LCDC_PWM1, "sclk_lcdc_pwm1", "xin24m", 0, RK3288_CLKGATE_CON(13), 11, GFLAGS),
 	GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0, RK3288_CLKGATE_CON(5), 9, GFLAGS),
 	GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu", "xin24m", 0, RK3288_CLKGATE_CON(5), 10, GFLAGS),
-	GATE(0, "sclk_mipidsi_24m", "xin24m", 0, RK3288_CLKGATE_CON(5), 15, GFLAGS),
+	GATE(SCLK_MIPIDSI_24M, "sclk_mipidsi_24m", "xin24m", 0, RK3288_CLKGATE_CON(5), 15, GFLAGS),
 
 	/* sclk_gpu gates */
 	GATE(ACLK_GPU, "aclk_gpu", "sclk_gpu", 0, RK3288_CLKGATE_CON(18), 0, GFLAGS),
@@ -783,10 +783,10 @@ static const char *const rk3288_critical_clocks[] __initconst = {
 	"pclk_pd_pmu",
 };
 
-#ifdef CONFIG_PM_SLEEP
 static void __iomem *rk3288_cru_base;
 
-/* Some CRU registers will be reset in maskrom when the system
+/*
+ * Some CRU registers will be reset in maskrom when the system
  * wakes up from fastboot.
  * So save them before suspend, restore them after resume.
  */
@@ -840,33 +840,27 @@ static void rk3288_clk_resume(void)
 	}
 }
 
+static void rk3288_clk_shutdown(void)
+{
+	writel_relaxed(0xf3030000, rk3288_cru_base + RK3288_MODE_CON);
+}
+
 static struct syscore_ops rk3288_clk_syscore_ops = {
 	.suspend = rk3288_clk_suspend,
 	.resume = rk3288_clk_resume,
 };
 
-static void rk3288_clk_sleep_init(void __iomem *reg_base)
-{
-	rk3288_cru_base = reg_base;
-	register_syscore_ops(&rk3288_clk_syscore_ops);
-}
-
-#else /* CONFIG_PM_SLEEP */
-static void rk3288_clk_sleep_init(void __iomem *reg_base) {}
-#endif
-
 static void __init rk3288_clk_init(struct device_node *np)
 {
-	void __iomem *reg_base;
 	struct clk *clk;
 
-	reg_base = of_iomap(np, 0);
-	if (!reg_base) {
+	rk3288_cru_base = of_iomap(np, 0);
+	if (!rk3288_cru_base) {
 		pr_err("%s: could not map cru region\n", __func__);
 		return;
 	}
 
-	rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
+	rockchip_clk_init(np, rk3288_cru_base, CLK_NR_CLKS);
 
 	/* xin12m is created by an cru-internal divider */
 	clk = clk_register_fixed_factor(NULL, "xin12m", "xin24m", 0, 1, 2);
@@ -907,10 +901,12 @@ static void __init rk3288_clk_init(struct device_node *np)
 			&rk3288_cpuclk_data, rk3288_cpuclk_rates,
 			ARRAY_SIZE(rk3288_cpuclk_rates));
 
-	rockchip_register_softrst(np, 12, reg_base + RK3288_SOFTRST_CON(0),
+	rockchip_register_softrst(np, 12,
+				  rk3288_cru_base + RK3288_SOFTRST_CON(0),
 				  ROCKCHIP_SOFTRST_HIWORD_MASK);
 
-	rockchip_register_restart_notifier(RK3288_GLB_SRST_FST);
-	rk3288_clk_sleep_init(reg_base);
+	rockchip_register_restart_notifier(RK3288_GLB_SRST_FST,
+					   rk3288_clk_shutdown);
+	register_syscore_ops(&rk3288_clk_syscore_ops);
 }
 CLK_OF_DECLARE(rk3288_cru, "rockchip,rk3288-cru", rk3288_clk_init);

drivers/clk/rockchip/clk-rk3368.c

@@ -184,13 +184,13 @@ static const struct rockchip_cpuclk_reg_data rk3368_cpuclkl_data = {
 
 #define RK3368_CLKSEL0(_offs, _aclkm)					\
 	{								\
-		.reg = RK3288_CLKSEL_CON(0 + _offs),			\
+		.reg = RK3368_CLKSEL_CON(0 + _offs),			\
 		.val = HIWORD_UPDATE(_aclkm, RK3368_DIV_ACLKM_MASK,	\
 				RK3368_DIV_ACLKM_SHIFT),		\
 	}
 #define RK3368_CLKSEL1(_offs, _atclk, _pdbg)				\
 	{								\
-		.reg = RK3288_CLKSEL_CON(1 + _offs),			\
+		.reg = RK3368_CLKSEL_CON(1 + _offs),			\
 		.val = HIWORD_UPDATE(_atclk, RK3368_DIV_ATCLK_MASK,	\
 				RK3368_DIV_ATCLK_SHIFT) |		\
 		       HIWORD_UPDATE(_pdbg, RK3368_DIV_PCLK_DBG_MASK,	\
@@ -819,6 +819,13 @@ static struct rockchip_clk_branch rk3368_clk_branches[] __initdata = {
 };
 
 static const char *const rk3368_critical_clocks[] __initconst = {
+	"aclk_bus",
+	"aclk_peri",
+	/*
+	 * pwm1 supplies vdd_logic on a lot of boards, is currently unhandled
+	 * but needs to stay enabled there (including its parents) at all times.
+	 */
+	"pclk_pwm1",
 	"pclk_pd_pmu",
 };
 
@@ -882,6 +889,6 @@ static void __init rk3368_clk_init(struct device_node *np)
 	rockchip_register_softrst(np, 15, reg_base + RK3368_SOFTRST_CON(0),
 				  ROCKCHIP_SOFTRST_HIWORD_MASK);
 
-	rockchip_register_restart_notifier(RK3368_GLB_SRST_FST);
+	rockchip_register_restart_notifier(RK3368_GLB_SRST_FST, NULL);
 }
 CLK_OF_DECLARE(rk3368_cru, "rockchip,rk3368-cru", rk3368_clk_init);

drivers/clk/rockchip/clk.c

@@ -341,9 +341,13 @@ void __init rockchip_clk_protect_critical(const char *const clocks[],
 }
 
 static unsigned int reg_restart;
+static void (*cb_restart)(void);
 static int rockchip_restart_notify(struct notifier_block *this,
 				   unsigned long mode, void *cmd)
 {
+	if (cb_restart)
+		cb_restart();
+
 	writel(0xfdb9, reg_base + reg_restart);
 	return NOTIFY_DONE;
 }
@@ -353,11 +357,12 @@ static struct notifier_block rockchip_restart_handler = {
 	.priority = 128,
 };
 
-void __init rockchip_register_restart_notifier(unsigned int reg)
+void __init rockchip_register_restart_notifier(unsigned int reg, void (*cb)(void))
 {
 	int ret;
 
 	reg_restart = reg;
+	cb_restart = cb;
 	ret = register_restart_handler(&rockchip_restart_handler);
 	if (ret)
 		pr_err("%s: cannot register restart handler, %d\n",

drivers/clk/rockchip/clk.h

@@ -2,6 +2,9 @@
  * Copyright (c) 2014 MundoReader S.L.
  * Author: Heiko Stuebner <heiko@sntech.de>
  *
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Xing Zheng <zhengxing@rock-chips.com>
+ *
  * based on
  *
  * samsung/clk.h
@@ -30,7 +33,7 @@ struct clk;
 #define HIWORD_UPDATE(val, mask, shift) \
 		((val) << (shift) | (mask) << ((shift) + 16))
 
-/* register positions shared by RK2928, RK3066 and RK3188 */
+/* register positions shared by RK2928, RK3036, RK3066, RK3188 and RK3228 */
 #define RK2928_PLL_CON(x)		((x) * 0x4)
 #define RK2928_MODE_CON		0x40
 #define RK2928_CLKSEL_CON(x)	((x) * 0x4 + 0x44)
@@ -40,6 +43,22 @@ struct clk;
 #define RK2928_SOFTRST_CON(x)	((x) * 0x4 + 0x110)
 #define RK2928_MISC_CON		0x134
 
+#define RK3036_SDMMC_CON0		0x144
+#define RK3036_SDMMC_CON1		0x148
+#define RK3036_SDIO_CON0		0x14c
+#define RK3036_SDIO_CON1		0x150
+#define RK3036_EMMC_CON0		0x154
+#define RK3036_EMMC_CON1		0x158
+
+#define RK3228_GLB_SRST_FST		0x1f0
+#define RK3228_GLB_SRST_SND		0x1f4
+#define RK3228_SDMMC_CON0		0x1c0
+#define RK3228_SDMMC_CON1		0x1c4
+#define RK3228_SDIO_CON0		0x1c8
+#define RK3228_SDIO_CON1		0x1cc
+#define RK3228_EMMC_CON0		0x1d8
+#define RK3228_EMMC_CON1		0x1dc
+
 #define RK3288_PLL_CON(x)		RK2928_PLL_CON(x)
 #define RK3288_MODE_CON			0x50
 #define RK3288_CLKSEL_CON(x)		((x) * 0x4 + 0x60)
@@ -74,9 +93,22 @@ struct clk;
 #define RK3368_EMMC_CON1		0x41c
 
 enum rockchip_pll_type {
+	pll_rk3036,
 	pll_rk3066,
 };
 
+#define RK3036_PLL_RATE(_rate, _refdiv, _fbdiv, _postdiv1,	\
+			_postdiv2, _dsmpd, _frac)		\
+{								\
+	.rate	= _rate##U,					\
+	.fbdiv = _fbdiv,					\
+	.postdiv1 = _postdiv1,					\
+	.refdiv = _refdiv,					\
+	.postdiv2 = _postdiv2,					\
+	.dsmpd = _dsmpd,					\
+	.frac = _frac,						\
+}
+
 #define RK3066_PLL_RATE(_rate, _nr, _nf, _no)	\
 {						\
 	.rate	= _rate##U,			\
@@ -101,6 +133,13 @@ struct rockchip_pll_rate_table {
 	unsigned int nf;
 	unsigned int no;
 	unsigned int nb;
+	/* for RK3036 */
+	unsigned int fbdiv;
+	unsigned int postdiv1;
+	unsigned int refdiv;
+	unsigned int postdiv2;
+	unsigned int dsmpd;
+	unsigned int frac;
 };
 
 /**
@@ -464,7 +503,7 @@ void rockchip_clk_register_armclk(unsigned int lookup_id, const char *name,
 			const struct rockchip_cpuclk_rate_table *rates,
 			int nrates);
 void rockchip_clk_protect_critical(const char *const clocks[], int nclocks);
-void rockchip_register_restart_notifier(unsigned int reg);
+void rockchip_register_restart_notifier(unsigned int reg, void (*cb)(void));
 
 #define ROCKCHIP_SOFTRST_HIWORD_MASK	BIT(0)
 

drivers/clk/shmobile/Makefile

@@ -1,13 +1,13 @@
 obj-$(CONFIG_ARCH_EMEV2)		+= clk-emev2.o
-obj-$(CONFIG_ARCH_R7S72100)		+= clk-rz.o
-obj-$(CONFIG_ARCH_R8A73A4)		+= clk-r8a73a4.o
-obj-$(CONFIG_ARCH_R8A7740)		+= clk-r8a7740.o
-obj-$(CONFIG_ARCH_R8A7778)		+= clk-r8a7778.o
-obj-$(CONFIG_ARCH_R8A7779)		+= clk-r8a7779.o
-obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o
-obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o
-obj-$(CONFIG_ARCH_R8A7793)		+= clk-rcar-gen2.o
-obj-$(CONFIG_ARCH_R8A7794)		+= clk-rcar-gen2.o
-obj-$(CONFIG_ARCH_SH73A0)		+= clk-sh73a0.o
-obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-div6.o
-obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-mstp.o
+obj-$(CONFIG_ARCH_R7S72100)		+= clk-rz.o clk-mstp.o
+obj-$(CONFIG_ARCH_R8A73A4)		+= clk-r8a73a4.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7740)		+= clk-r8a7740.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7778)		+= clk-r8a7778.o clk-mstp.o
+obj-$(CONFIG_ARCH_R8A7779)		+= clk-r8a7779.o clk-mstp.o
+obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7793)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7794)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7795)		+= renesas-cpg-mssr.o \
+					   r8a7795-cpg-mssr.o clk-div6.o
+obj-$(CONFIG_ARCH_SH73A0)		+= clk-sh73a0.o clk-mstp.o clk-div6.o

drivers/clk/shmobile/clk-div6.c

@@ -18,6 +18,8 @@
 #include <linux/of_address.h>
 #include <linux/slab.h>
 
+#include "clk-div6.h"
+
 #define CPG_DIV6_CKSTP		BIT(8)
 #define CPG_DIV6_DIV(d)		((d) & 0x3f)
 #define CPG_DIV6_DIV_MASK	0x3f
@@ -172,67 +174,44 @@ static const struct clk_ops cpg_div6_clock_ops = {
 	.set_rate = cpg_div6_clock_set_rate,
 };
 
-static void __init cpg_div6_clock_init(struct device_node *np)
+
+/**
+ * cpg_div6_register - Register a DIV6 clock
+ * @name: Name of the DIV6 clock
+ * @num_parents: Number of parent clocks of the DIV6 clock (1, 4, or 8)
+ * @parent_names: Array containing the names of the parent clocks
+ * @reg: Mapped register used to control the DIV6 clock
+ */
+struct clk * __init cpg_div6_register(const char *name,
+				      unsigned int num_parents,
+				      const char **parent_names,
+				      void __iomem *reg)
 {
-	unsigned int num_parents, valid_parents;
-	const char **parent_names;
+	unsigned int valid_parents;
 	struct clk_init_data init;
 	struct div6_clock *clock;
-	const char *name;
 	struct clk *clk;
 	unsigned int i;
-	int ret;
 
 	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
 	if (!clock)
-		return;
-
-	num_parents = of_clk_get_parent_count(np);
-	if (num_parents < 1) {
-		pr_err("%s: no parent found for %s DIV6 clock\n",
-		       __func__, np->name);
-		return;
-	}
+		return ERR_PTR(-ENOMEM);
 
 	clock->parents = kmalloc_array(num_parents, sizeof(*clock->parents),
-		GFP_KERNEL);
-	parent_names = kmalloc_array(num_parents, sizeof(*parent_names),
-				GFP_KERNEL);
-	if (!parent_names)
-		return;
+				       GFP_KERNEL);
+	if (!clock->parents) {
+		clk = ERR_PTR(-ENOMEM);
+		goto free_clock;
+	}
 
-	/* Remap the clock register and read the divisor. Disabling the
-	 * clock overwrites the divisor, so we need to cache its value for the
-	 * enable operation.
+	clock->reg = reg;
+
+	/*
+	 * Read the divisor. Disabling the clock overwrites the divisor, so we
+	 * need to cache its value for the enable operation.
 	 */
-	clock->reg = of_iomap(np, 0);
-	if (clock->reg == NULL) {
-		pr_err("%s: failed to map %s DIV6 clock register\n",
-		       __func__, np->name);
-		goto error;
-	}
-
 	clock->div = (clk_readl(clock->reg) & CPG_DIV6_DIV_MASK) + 1;
 
-	/* Parse the DT properties. */
-	ret = of_property_read_string(np, "clock-output-names", &name);
-	if (ret < 0) {
-		pr_err("%s: failed to get %s DIV6 clock output name\n",
-		       __func__, np->name);
-		goto error;
-	}
-
-
-	for (i = 0, valid_parents = 0; i < num_parents; i++) {
-		const char *name = of_clk_get_parent_name(np, i);
-
-		if (name) {
-			parent_names[valid_parents] = name;
-			clock->parents[valid_parents] = i;
-			valid_parents++;
-		}
-	}
-
 	switch (num_parents) {
 	case 1:
 		/* fixed parent clock */
@@ -250,8 +229,18 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 		break;
 	default:
 		pr_err("%s: invalid number of parents for DIV6 clock %s\n",
-		       __func__, np->name);
-		goto error;
+		       __func__, name);
+		clk = ERR_PTR(-EINVAL);
+		goto free_parents;
+	}
+
+	/* Filter out invalid parents */
+	for (i = 0, valid_parents = 0; i < num_parents; i++) {
+		if (parent_names[i]) {
+			parent_names[valid_parents] = parent_names[i];
+			clock->parents[valid_parents] = i;
+			valid_parents++;
+		}
 	}
 
 	/* Register the clock. */
@@ -264,6 +253,53 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 	clock->hw.init = &init;
 
 	clk = clk_register(NULL, &clock->hw);
+	if (IS_ERR(clk))
+		goto free_parents;
+
+	return clk;
+
+free_parents:
+	kfree(clock->parents);
+free_clock:
+	kfree(clock);
+	return clk;
+}
+
+static void __init cpg_div6_clock_init(struct device_node *np)
+{
+	unsigned int num_parents;
+	const char **parent_names;
+	const char *clk_name = np->name;
+	void __iomem *reg;
+	struct clk *clk;
+	unsigned int i;
+
+	num_parents = of_clk_get_parent_count(np);
+	if (num_parents < 1) {
+		pr_err("%s: no parent found for %s DIV6 clock\n",
+		       __func__, np->name);
+		return;
+	}
+
+	parent_names = kmalloc_array(num_parents, sizeof(*parent_names),
+				GFP_KERNEL);
+	if (!parent_names)
+		return;
+
+	reg = of_iomap(np, 0);
+	if (reg == NULL) {
+		pr_err("%s: failed to map %s DIV6 clock register\n",
+		       __func__, np->name);
+		goto error;
+	}
+
+	/* Parse the DT properties. */
+	of_property_read_string(np, "clock-output-names", &clk_name);
+
+	for (i = 0; i < num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(np, i);
+
+	clk = cpg_div6_register(clk_name, num_parents, parent_names, reg);
 	if (IS_ERR(clk)) {
 		pr_err("%s: failed to register %s DIV6 clock (%ld)\n",
 		       __func__, np->name, PTR_ERR(clk));
@@ -276,9 +312,8 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 	return;
 
 error:
-	if (clock->reg)
-		iounmap(clock->reg);
+	if (reg)
+		iounmap(reg);
 	kfree(parent_names);
-	kfree(clock);
 }
 CLK_OF_DECLARE(cpg_div6_clk, "renesas,cpg-div6-clock", cpg_div6_clock_init);

drivers/clk/shmobile/clk-div6.h

@@ -0,0 +1,7 @@
+#ifndef __SHMOBILE_CLK_DIV6_H__
+#define __SHMOBILE_CLK_DIV6_H__
+
+struct clk *cpg_div6_register(const char *name, unsigned int num_parents,
+			      const char **parent_names, void __iomem *reg);
+
+#endif

drivers/clk/shmobile/clk-rcar-gen2.c

@@ -115,7 +115,7 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 	 *
 	 * Using experimental measurements, it seems that no more than
 	 * ~10 iterations are needed, independently of the CPU rate.
-	 * Since this value might be dependant of external xtal rate, pll1
+	 * Since this value might be dependent on external xtal rate, pll1
 	 * rate or even the other emulation clocks rate, use 1000 as a
 	 * "super" safe value.
 	 */
@@ -262,7 +262,7 @@ static struct clk * __init cpg_adsp_clk_register(struct rcar_gen2_cpg *cpg)
  * 1  1  0	30 / 2		x172/2	x208/2	x106
  * 1  1  1	30 / 2		x172/2	x208/2	x88
  *
- * *1 :	Table 7.6 indicates VCO ouput (PLLx = VCO/2)
+ * *1 :	Table 7.6 indicates VCO output (PLLx = VCO/2)
  */
 #define CPG_PLL_CONFIG_INDEX(md)	((((md) & BIT(14)) >> 12) | \
 					 (((md) & BIT(13)) >> 12) | \

drivers/clk/shmobile/r8a7795-cpg-mssr.c

@@ -0,0 +1,382 @@
+/*
+ * r8a7795 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2015 Glider bvba
+ *
+ * Based on clk-rcar-gen3.c
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bug.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+
+#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+
+
+enum clk_ids {
+	/* Core Clock Outputs exported to DT */
+	LAST_DT_CORE_CLK = R8A7795_CLK_OSC,
+
+	/* External Input Clocks */
+	CLK_EXTAL,
+	CLK_EXTALR,
+
+	/* Internal Core Clocks */
+	CLK_MAIN,
+	CLK_PLL0,
+	CLK_PLL1,
+	CLK_PLL2,
+	CLK_PLL3,
+	CLK_PLL4,
+	CLK_PLL1_DIV2,
+	CLK_PLL1_DIV4,
+	CLK_S0,
+	CLK_S1,
+	CLK_S2,
+	CLK_S3,
+	CLK_SDSRC,
+	CLK_SSPSRC,
+
+	/* Module Clocks */
+	MOD_CLK_BASE
+};
+
+enum r8a7795_clk_types {
+	CLK_TYPE_GEN3_MAIN = CLK_TYPE_CUSTOM,
+	CLK_TYPE_GEN3_PLL0,
+	CLK_TYPE_GEN3_PLL1,
+	CLK_TYPE_GEN3_PLL2,
+	CLK_TYPE_GEN3_PLL3,
+	CLK_TYPE_GEN3_PLL4,
+};
+
+static const struct cpg_core_clk r8a7795_core_clks[] __initconst = {
+	/* External Clock Inputs */
+	DEF_INPUT("extal",  CLK_EXTAL),
+	DEF_INPUT("extalr", CLK_EXTALR),
+
+	/* Internal Core Clocks */
+	DEF_BASE(".main",       CLK_MAIN, CLK_TYPE_GEN3_MAIN, CLK_EXTAL),
+	DEF_BASE(".pll0",       CLK_PLL0, CLK_TYPE_GEN3_PLL0, CLK_MAIN),
+	DEF_BASE(".pll1",       CLK_PLL1, CLK_TYPE_GEN3_PLL1, CLK_MAIN),
+	DEF_BASE(".pll2",       CLK_PLL2, CLK_TYPE_GEN3_PLL2, CLK_MAIN),
+	DEF_BASE(".pll3",       CLK_PLL3, CLK_TYPE_GEN3_PLL3, CLK_MAIN),
+	DEF_BASE(".pll4",       CLK_PLL4, CLK_TYPE_GEN3_PLL4, CLK_MAIN),
+
+	DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2,     CLK_PLL1,       2, 1),
+	DEF_FIXED(".pll1_div4", CLK_PLL1_DIV4,     CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED(".s0",        CLK_S0,            CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED(".s1",        CLK_S1,            CLK_PLL1_DIV2,  3, 1),
+	DEF_FIXED(".s2",        CLK_S2,            CLK_PLL1_DIV2,  4, 1),
+	DEF_FIXED(".s3",        CLK_S3,            CLK_PLL1_DIV2,  6, 1),
+
+	/* Core Clock Outputs */
+	DEF_FIXED("ztr",        R8A7795_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
+	DEF_FIXED("ztrd2",      R8A7795_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
+	DEF_FIXED("zt",         R8A7795_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
+	DEF_FIXED("zx",         R8A7795_CLK_ZX,    CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED("s0d1",       R8A7795_CLK_S0D1,  CLK_S0,         1, 1),
+	DEF_FIXED("s0d4",       R8A7795_CLK_S0D4,  CLK_S0,         4, 1),
+	DEF_FIXED("s1d1",       R8A7795_CLK_S1D1,  CLK_S1,         1, 1),
+	DEF_FIXED("s1d2",       R8A7795_CLK_S1D2,  CLK_S1,         2, 1),
+	DEF_FIXED("s1d4",       R8A7795_CLK_S1D4,  CLK_S1,         4, 1),
+	DEF_FIXED("s2d1",       R8A7795_CLK_S2D1,  CLK_S2,         1, 1),
+	DEF_FIXED("s2d2",       R8A7795_CLK_S2D2,  CLK_S2,         2, 1),
+	DEF_FIXED("s2d4",       R8A7795_CLK_S2D4,  CLK_S2,         4, 1),
+	DEF_FIXED("s3d1",       R8A7795_CLK_S3D1,  CLK_S3,         1, 1),
+	DEF_FIXED("s3d2",       R8A7795_CLK_S3D2,  CLK_S3,         2, 1),
+	DEF_FIXED("s3d4",       R8A7795_CLK_S3D4,  CLK_S3,         4, 1),
+	DEF_FIXED("cl",         R8A7795_CLK_CL,    CLK_PLL1_DIV2, 48, 1),
+	DEF_FIXED("cp",         R8A7795_CLK_CP,    CLK_EXTAL,      2, 1),
+
+	DEF_DIV6P1("mso",       R8A7795_CLK_MSO,   CLK_PLL1_DIV4, 0x014),
+	DEF_DIV6P1("hdmi",      R8A7795_CLK_HDMI,  CLK_PLL1_DIV2, 0x250),
+};
+
+static const struct mssr_mod_clk r8a7795_mod_clks[] __initconst = {
+	DEF_MOD("scif5",		 202,	R8A7795_CLK_S3D4),
+	DEF_MOD("scif4",		 203,	R8A7795_CLK_S3D4),
+	DEF_MOD("scif3",		 204,	R8A7795_CLK_S3D4),
+	DEF_MOD("scif1",		 206,	R8A7795_CLK_S3D4),
+	DEF_MOD("scif0",		 207,	R8A7795_CLK_S3D4),
+	DEF_MOD("msiof3",		 208,	R8A7795_CLK_MSO),
+	DEF_MOD("msiof2",		 209,	R8A7795_CLK_MSO),
+	DEF_MOD("msiof1",		 210,	R8A7795_CLK_MSO),
+	DEF_MOD("msiof0",		 211,	R8A7795_CLK_MSO),
+	DEF_MOD("sys-dmac2",		 217,	R8A7795_CLK_S3D1),
+	DEF_MOD("sys-dmac1",		 218,	R8A7795_CLK_S3D1),
+	DEF_MOD("sys-dmac0",		 219,	R8A7795_CLK_S3D1),
+	DEF_MOD("scif2",		 310,	R8A7795_CLK_S3D4),
+	DEF_MOD("pcie1",		 318,	R8A7795_CLK_S3D1),
+	DEF_MOD("pcie0",		 319,	R8A7795_CLK_S3D1),
+	DEF_MOD("intc-ap",		 408,	R8A7795_CLK_S3D1),
+	DEF_MOD("audmac0",		 502,	R8A7795_CLK_S3D4),
+	DEF_MOD("audmac1",		 501,	R8A7795_CLK_S3D4),
+	DEF_MOD("hscif4",		 516,	R8A7795_CLK_S3D1),
+	DEF_MOD("hscif3",		 517,	R8A7795_CLK_S3D1),
+	DEF_MOD("hscif2",		 518,	R8A7795_CLK_S3D1),
+	DEF_MOD("hscif1",		 519,	R8A7795_CLK_S3D1),
+	DEF_MOD("hscif0",		 520,	R8A7795_CLK_S3D1),
+	DEF_MOD("vspd3",		 620,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspd2",		 621,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspd1",		 622,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspd0",		 623,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspbc",		 624,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspbd",		 626,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspi2",		 629,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspi1",		 630,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspi0",		 631,	R8A7795_CLK_S2D1),
+	DEF_MOD("ehci2",		 701,	R8A7795_CLK_S3D4),
+	DEF_MOD("ehci1",		 702,	R8A7795_CLK_S3D4),
+	DEF_MOD("ehci0",		 703,	R8A7795_CLK_S3D4),
+	DEF_MOD("hsusb",		 704,	R8A7795_CLK_S3D4),
+	DEF_MOD("du3",			 721,	R8A7795_CLK_S2D1),
+	DEF_MOD("du2",			 722,	R8A7795_CLK_S2D1),
+	DEF_MOD("du1",			 723,	R8A7795_CLK_S2D1),
+	DEF_MOD("du0",			 724,	R8A7795_CLK_S2D1),
+	DEF_MOD("hdmi1",		 728,	R8A7795_CLK_HDMI),
+	DEF_MOD("hdmi0",		 729,	R8A7795_CLK_HDMI),
+	DEF_MOD("etheravb",		 812,	R8A7795_CLK_S3D2),
+	DEF_MOD("gpio7",		 905,	R8A7795_CLK_CP),
+	DEF_MOD("gpio6",		 906,	R8A7795_CLK_CP),
+	DEF_MOD("gpio5",		 907,	R8A7795_CLK_CP),
+	DEF_MOD("gpio4",		 908,	R8A7795_CLK_CP),
+	DEF_MOD("gpio3",		 909,	R8A7795_CLK_CP),
+	DEF_MOD("gpio2",		 910,	R8A7795_CLK_CP),
+	DEF_MOD("gpio1",		 911,	R8A7795_CLK_CP),
+	DEF_MOD("gpio0",		 912,	R8A7795_CLK_CP),
+	DEF_MOD("i2c6",			 918,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c5",			 919,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c4",			 927,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c3",			 928,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c2",			 929,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c1",			 930,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c0",			 931,	R8A7795_CLK_S3D2),
+	DEF_MOD("ssi-all",		1005,	R8A7795_CLK_S3D4),
+	DEF_MOD("ssi9",			1006,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi8",			1007,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi7",			1008,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi6",			1009,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi5",			1010,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi4",			1011,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi3",			1012,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi2",			1013,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi1",			1014,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi0",			1015,	MOD_CLK_ID(1005)),
+	DEF_MOD("scu-all",		1017,	R8A7795_CLK_S3D4),
+	DEF_MOD("scu-dvc1",		1018,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-dvc0",		1019,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-ctu1-mix1",	1020,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-ctu0-mix0",	1021,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src9",		1022,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src8",		1023,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src7",		1024,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src6",		1025,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src5",		1026,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src4",		1027,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src3",		1028,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src2",		1029,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src1",		1030,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src0",		1031,	MOD_CLK_ID(1017)),
+};
+
+static const unsigned int r8a7795_crit_mod_clks[] __initconst = {
+	MOD_CLK_ID(408),	/* INTC-AP (GIC) */
+};
+
+
+#define CPG_PLL0CR	0x00d8
+#define CPG_PLL2CR	0x002c
+#define CPG_PLL4CR	0x01f4
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ *   MD		EXTAL		PLL0	PLL1	PLL2	PLL3	PLL4
+ * 14 13 19 17	(MHz)
+ *-------------------------------------------------------------------
+ * 0  0  0  0	16.66 x 1	x180	x192	x144	x192	x144
+ * 0  0  0  1	16.66 x 1	x180	x192	x144	x128	x144
+ * 0  0  1  0	Prohibited setting
+ * 0  0  1  1	16.66 x 1	x180	x192	x144	x192	x144
+ * 0  1  0  0	20    x 1	x150	x160	x120	x160	x120
+ * 0  1  0  1	20    x 1	x150	x160	x120	x106	x120
+ * 0  1  1  0	Prohibited setting
+ * 0  1  1  1	20    x 1	x150	x160	x120	x160	x120
+ * 1  0  0  0	25    x 1	x120	x128	x96	x128	x96
+ * 1  0  0  1	25    x 1	x120	x128	x96	x84	x96
+ * 1  0  1  0	Prohibited setting
+ * 1  0  1  1	25    x 1	x120	x128	x96	x128	x96
+ * 1  1  0  0	33.33 / 2	x180	x192	x144	x192	x144
+ * 1  1  0  1	33.33 / 2	x180	x192	x144	x128	x144
+ * 1  1  1  0	Prohibited setting
+ * 1  1  1  1	33.33 / 2	x180	x192	x144	x192	x144
+ */
+#define CPG_PLL_CONFIG_INDEX(md)	((((md) & BIT(14)) >> 11) | \
+					 (((md) & BIT(13)) >> 11) | \
+					 (((md) & BIT(19)) >> 18) | \
+					 (((md) & BIT(17)) >> 17))
+
+struct cpg_pll_config {
+	unsigned int extal_div;
+	unsigned int pll1_mult;
+	unsigned int pll3_mult;
+};
+
+static const struct cpg_pll_config cpg_pll_configs[16] __initconst = {
+	/* EXTAL div	PLL1 mult	PLL3 mult */
+	{ 1,		192,		192,	},
+	{ 1,		192,		128,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		192,		192,	},
+	{ 1,		160,		160,	},
+	{ 1,		160,		106,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		160,		160,	},
+	{ 1,		128,		128,	},
+	{ 1,		128,		84,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		128,		128,	},
+	{ 2,		192,		192,	},
+	{ 2,		192,		128,	},
+	{ 0, /* Prohibited setting */		},
+	{ 2,		192,		192,	},
+};
+
+static const struct cpg_pll_config *cpg_pll_config __initdata;
+
+static
+struct clk * __init r8a7795_cpg_clk_register(struct device *dev,
+					     const struct cpg_core_clk *core,
+					     const struct cpg_mssr_info *info,
+					     struct clk **clks,
+					     void __iomem *base)
+{
+	const struct clk *parent;
+	unsigned int mult = 1;
+	unsigned int div = 1;
+	u32 value;
+
+	parent = clks[core->parent];
+	if (IS_ERR(parent))
+		return ERR_CAST(parent);
+
+	switch (core->type) {
+	case CLK_TYPE_GEN3_MAIN:
+		div = cpg_pll_config->extal_div;
+		break;
+
+	case CLK_TYPE_GEN3_PLL0:
+		/*
+		 * PLL0 is a configurable multiplier clock. Register it as a
+		 * fixed factor clock for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		value = readl(base + CPG_PLL0CR);
+		mult = (((value >> 24) & 0x7f) + 1) * 2;
+		break;
+
+	case CLK_TYPE_GEN3_PLL1:
+		mult = cpg_pll_config->pll1_mult;
+		break;
+
+	case CLK_TYPE_GEN3_PLL2:
+		/*
+		 * PLL2 is a configurable multiplier clock. Register it as a
+		 * fixed factor clock for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		value = readl(base + CPG_PLL2CR);
+		mult = (((value >> 24) & 0x7f) + 1) * 2;
+		break;
+
+	case CLK_TYPE_GEN3_PLL3:
+		mult = cpg_pll_config->pll3_mult;
+		break;
+
+	case CLK_TYPE_GEN3_PLL4:
+		/*
+		 * PLL4 is a configurable multiplier clock. Register it as a
+		 * fixed factor clock for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		value = readl(base + CPG_PLL4CR);
+		mult = (((value >> 24) & 0x7f) + 1) * 2;
+		break;
+
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	return clk_register_fixed_factor(NULL, core->name,
+					 __clk_get_name(parent), 0, mult, div);
+}
+
+/*
+ * Reset register definitions.
+ */
+#define MODEMR	0xe6160060
+
+static u32 rcar_gen3_read_mode_pins(void)
+{
+	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+	u32 mode;
+
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	return mode;
+}
+
+static int __init r8a7795_cpg_mssr_init(struct device *dev)
+{
+	u32 cpg_mode = rcar_gen3_read_mode_pins();
+
+	cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+	if (!cpg_pll_config->extal_div) {
+		dev_err(dev, "Prohibited setting (cpg_mode=0x%x)\n", cpg_mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+const struct cpg_mssr_info r8a7795_cpg_mssr_info __initconst = {
+	/* Core Clocks */
+	.core_clks = r8a7795_core_clks,
+	.num_core_clks = ARRAY_SIZE(r8a7795_core_clks),
+	.last_dt_core_clk = LAST_DT_CORE_CLK,
+	.num_total_core_clks = MOD_CLK_BASE,
+
+	/* Module Clocks */
+	.mod_clks = r8a7795_mod_clks,
+	.num_mod_clks = ARRAY_SIZE(r8a7795_mod_clks),
+	.num_hw_mod_clks = 12 * 32,
+
+	/* Critical Module Clocks */
+	.crit_mod_clks = r8a7795_crit_mod_clks,
+	.num_crit_mod_clks = ARRAY_SIZE(r8a7795_crit_mod_clks),
+
+	/* Callbacks */
+	.init = r8a7795_cpg_mssr_init,
+	.cpg_clk_register = r8a7795_cpg_clk_register,
+};

drivers/clk/shmobile/renesas-cpg-mssr.c

@@ -0,0 +1,596 @@
+/*
+ * Renesas Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2015 Glider bvba
+ *
+ * Based on clk-mstp.c, clk-rcar-gen2.c, and clk-rcar-gen3.c
+ *
+ * Copyright (C) 2013 Ideas On Board SPRL
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "clk-div6.h"
+
+#ifdef DEBUG
+#define WARN_DEBUG(x)	do { } while (0)
+#else
+#define WARN_DEBUG(x)	WARN_ON(x)
+#endif
+
+
+/*
+ * Module Standby and Software Reset register offets.
+ *
+ * If the registers exist, these are valid for SH-Mobile, R-Mobile,
+ * R-Car Gen 2, and R-Car Gen 3.
+ * These are NOT valid for R-Car Gen1 and RZ/A1!
+ */
+
+/*
+ * Module Stop Status Register offsets
+ */
+
+static const u16 mstpsr[] = {
+	0x030, 0x038, 0x040, 0x048, 0x04C, 0x03C, 0x1C0, 0x1C4,
+	0x9A0, 0x9A4, 0x9A8, 0x9AC,
+};
+
+#define	MSTPSR(i)	mstpsr[i]
+
+
+/*
+ * System Module Stop Control Register offsets
+ */
+
+static const u16 smstpcr[] = {
+	0x130, 0x134, 0x138, 0x13C, 0x140, 0x144, 0x148, 0x14C,
+	0x990, 0x994, 0x998, 0x99C,
+};
+
+#define	SMSTPCR(i)	smstpcr[i]
+
+
+/*
+ * Software Reset Register offsets
+ */
+
+static const u16 srcr[] = {
+	0x0A0, 0x0A8, 0x0B0, 0x0B8, 0x0BC, 0x0C4, 0x1C8, 0x1CC,
+	0x920, 0x924, 0x928, 0x92C,
+};
+
+#define	SRCR(i)		srcr[i]
+
+
+/* Realtime Module Stop Control Register offsets */
+#define RMSTPCR(i)	(smstpcr[i] - 0x20)
+
+/* Modem Module Stop Control Register offsets (r8a73a4) */
+#define MMSTPCR(i)	(smstpcr[i] + 0x20)
+
+/* Software Reset Clearing Register offsets */
+#define	SRSTCLR(i)	(0x940 + (i) * 4)
+
+
+/**
+ * Clock Pulse Generator / Module Standby and Software Reset Private Data
+ *
+ * @dev: CPG/MSSR device
+ * @base: CPG/MSSR register block base address
+ * @mstp_lock: protects writes to SMSTPCR
+ * @clks: Array containing all Core and Module Clocks
+ * @num_core_clks: Number of Core Clocks in clks[]
+ * @num_mod_clks: Number of Module Clocks in clks[]
+ * @last_dt_core_clk: ID of the last Core Clock exported to DT
+ */
+struct cpg_mssr_priv {
+	struct device *dev;
+	void __iomem *base;
+	spinlock_t mstp_lock;
+
+	struct clk **clks;
+	unsigned int num_core_clks;
+	unsigned int num_mod_clks;
+	unsigned int last_dt_core_clk;
+};
+
+
+/**
+ * struct mstp_clock - MSTP gating clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @index: MSTP clock number
+ * @priv: CPG/MSSR private data
+ */
+struct mstp_clock {
+	struct clk_hw hw;
+	u32 index;
+	struct cpg_mssr_priv *priv;
+};
+
+#define to_mstp_clock(_hw) container_of(_hw, struct mstp_clock, hw)
+
+static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
+{
+	struct mstp_clock *clock = to_mstp_clock(hw);
+	struct cpg_mssr_priv *priv = clock->priv;
+	unsigned int reg = clock->index / 32;
+	unsigned int bit = clock->index % 32;
+	struct device *dev = priv->dev;
+	u32 bitmask = BIT(bit);
+	unsigned long flags;
+	unsigned int i;
+	u32 value;
+
+	dev_dbg(dev, "MSTP %u%02u/%pC %s\n", reg, bit, hw->clk,
+		enable ? "ON" : "OFF");
+	spin_lock_irqsave(&priv->mstp_lock, flags);
+
+	value = clk_readl(priv->base + SMSTPCR(reg));
+	if (enable)
+		value &= ~bitmask;
+	else
+		value |= bitmask;
+	clk_writel(value, priv->base + SMSTPCR(reg));
+
+	spin_unlock_irqrestore(&priv->mstp_lock, flags);
+
+	if (!enable)
+		return 0;
+
+	for (i = 1000; i > 0; --i) {
+		if (!(clk_readl(priv->base + MSTPSR(reg)) &
+		      bitmask))
+			break;
+		cpu_relax();
+	}
+
+	if (!i) {
+		dev_err(dev, "Failed to enable SMSTP %p[%d]\n",
+			priv->base + SMSTPCR(reg), bit);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int cpg_mstp_clock_enable(struct clk_hw *hw)
+{
+	return cpg_mstp_clock_endisable(hw, true);
+}
+
+static void cpg_mstp_clock_disable(struct clk_hw *hw)
+{
+	cpg_mstp_clock_endisable(hw, false);
+}
+
+static int cpg_mstp_clock_is_enabled(struct clk_hw *hw)
+{
+	struct mstp_clock *clock = to_mstp_clock(hw);
+	struct cpg_mssr_priv *priv = clock->priv;
+	u32 value;
+
+	value = clk_readl(priv->base + MSTPSR(clock->index / 32));
+
+	return !(value & BIT(clock->index % 32));
+}
+
+static const struct clk_ops cpg_mstp_clock_ops = {
+	.enable = cpg_mstp_clock_enable,
+	.disable = cpg_mstp_clock_disable,
+	.is_enabled = cpg_mstp_clock_is_enabled,
+};
+
+static
+struct clk *cpg_mssr_clk_src_twocell_get(struct of_phandle_args *clkspec,
+					 void *data)
+{
+	unsigned int clkidx = clkspec->args[1];
+	struct cpg_mssr_priv *priv = data;
+	struct device *dev = priv->dev;
+	unsigned int idx;
+	const char *type;
+	struct clk *clk;
+
+	switch (clkspec->args[0]) {
+	case CPG_CORE:
+		type = "core";
+		if (clkidx > priv->last_dt_core_clk) {
+			dev_err(dev, "Invalid %s clock index %u\n", type,
+			       clkidx);
+			return ERR_PTR(-EINVAL);
+		}
+		clk = priv->clks[clkidx];
+		break;
+
+	case CPG_MOD:
+		type = "module";
+		idx = MOD_CLK_PACK(clkidx);
+		if (clkidx % 100 > 31 || idx >= priv->num_mod_clks) {
+			dev_err(dev, "Invalid %s clock index %u\n", type,
+				clkidx);
+			return ERR_PTR(-EINVAL);
+		}
+		clk = priv->clks[priv->num_core_clks + idx];
+		break;
+
+	default:
+		dev_err(dev, "Invalid CPG clock type %u\n", clkspec->args[0]);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (IS_ERR(clk))
+		dev_err(dev, "Cannot get %s clock %u: %ld", type, clkidx,
+		       PTR_ERR(clk));
+	else
+		dev_dbg(dev, "clock (%u, %u) is %pC at %pCr Hz\n",
+			clkspec->args[0], clkspec->args[1], clk, clk);
+	return clk;
+}
+
+static void __init cpg_mssr_register_core_clk(const struct cpg_core_clk *core,
+					      const struct cpg_mssr_info *info,
+					      struct cpg_mssr_priv *priv)
+{
+	struct clk *clk = NULL, *parent;
+	struct device *dev = priv->dev;
+	unsigned int id = core->id;
+	const char *parent_name;
+
+	WARN_DEBUG(id >= priv->num_core_clks);
+	WARN_DEBUG(PTR_ERR(priv->clks[id]) != -ENOENT);
+
+	switch (core->type) {
+	case CLK_TYPE_IN:
+		clk = of_clk_get_by_name(priv->dev->of_node, core->name);
+		break;
+
+	case CLK_TYPE_FF:
+	case CLK_TYPE_DIV6P1:
+		WARN_DEBUG(core->parent >= priv->num_core_clks);
+		parent = priv->clks[core->parent];
+		if (IS_ERR(parent)) {
+			clk = parent;
+			goto fail;
+		}
+
+		parent_name = __clk_get_name(parent);
+		if (core->type == CLK_TYPE_FF) {
+			clk = clk_register_fixed_factor(NULL, core->name,
+							parent_name, 0,
+							core->mult, core->div);
+		} else {
+			clk = cpg_div6_register(core->name, 1, &parent_name,
+						priv->base + core->offset);
+		}
+		break;
+
+	default:
+		if (info->cpg_clk_register)
+			clk = info->cpg_clk_register(dev, core, info,
+						     priv->clks, priv->base);
+		else
+			dev_err(dev, "%s has unsupported core clock type %u\n",
+				core->name, core->type);
+		break;
+	}
+
+	if (IS_ERR_OR_NULL(clk))
+		goto fail;
+
+	dev_dbg(dev, "Core clock %pC at %pCr Hz\n", clk, clk);
+	priv->clks[id] = clk;
+	return;
+
+fail:
+	dev_err(dev, "Failed to register %s clock %s: %ld\n", "core,",
+		core->name, PTR_ERR(clk));
+}
+
+static void __init cpg_mssr_register_mod_clk(const struct mssr_mod_clk *mod,
+					     const struct cpg_mssr_info *info,
+					     struct cpg_mssr_priv *priv)
+{
+	struct mstp_clock *clock = NULL;
+	struct device *dev = priv->dev;
+	unsigned int id = mod->id;
+	struct clk_init_data init;
+	struct clk *parent, *clk;
+	const char *parent_name;
+	unsigned int i;
+
+	WARN_DEBUG(id < priv->num_core_clks);
+	WARN_DEBUG(id >= priv->num_core_clks + priv->num_mod_clks);
+	WARN_DEBUG(mod->parent >= priv->num_core_clks + priv->num_mod_clks);
+	WARN_DEBUG(PTR_ERR(priv->clks[id]) != -ENOENT);
+
+	parent = priv->clks[mod->parent];
+	if (IS_ERR(parent)) {
+		clk = parent;
+		goto fail;
+	}
+
+	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
+	if (!clock) {
+		clk = ERR_PTR(-ENOMEM);
+		goto fail;
+	}
+
+	init.name = mod->name;
+	init.ops = &cpg_mstp_clock_ops;
+	init.flags = CLK_IS_BASIC | CLK_SET_RATE_PARENT;
+	for (i = 0; i < info->num_crit_mod_clks; i++)
+		if (id == info->crit_mod_clks[i]) {
+#ifdef CLK_ENABLE_HAND_OFF
+			dev_dbg(dev, "MSTP %s setting CLK_ENABLE_HAND_OFF\n",
+				mod->name);
+			init.flags |= CLK_ENABLE_HAND_OFF;
+			break;
+#else
+			dev_dbg(dev, "Ignoring MSTP %s to prevent disabling\n",
+				mod->name);
+			return;
+#endif
+		}
+
+	parent_name = __clk_get_name(parent);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clock->index = id - priv->num_core_clks;
+	clock->priv = priv;
+	clock->hw.init = &init;
+
+	clk = clk_register(NULL, &clock->hw);
+	if (IS_ERR(clk))
+		goto fail;
+
+	dev_dbg(dev, "Module clock %pC at %pCr Hz\n", clk, clk);
+	priv->clks[id] = clk;
+	return;
+
+fail:
+	dev_err(dev, "Failed to register %s clock %s: %ld\n", "module,",
+		mod->name, PTR_ERR(clk));
+	kfree(clock);
+}
+
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS_OF
+struct cpg_mssr_clk_domain {
+	struct generic_pm_domain genpd;
+	struct device_node *np;
+	unsigned int num_core_pm_clks;
+	unsigned int core_pm_clks[0];
+};
+
+static bool cpg_mssr_is_pm_clk(const struct of_phandle_args *clkspec,
+			       struct cpg_mssr_clk_domain *pd)
+{
+	unsigned int i;
+
+	if (clkspec->np != pd->np || clkspec->args_count != 2)
+		return false;
+
+	switch (clkspec->args[0]) {
+	case CPG_CORE:
+		for (i = 0; i < pd->num_core_pm_clks; i++)
+			if (clkspec->args[1] == pd->core_pm_clks[i])
+				return true;
+		return false;
+
+	case CPG_MOD:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static int cpg_mssr_attach_dev(struct generic_pm_domain *genpd,
+			       struct device *dev)
+{
+	struct cpg_mssr_clk_domain *pd =
+		container_of(genpd, struct cpg_mssr_clk_domain, genpd);
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args clkspec;
+	struct clk *clk;
+	int i = 0;
+	int error;
+
+	while (!of_parse_phandle_with_args(np, "clocks", "#clock-cells", i,
+					   &clkspec)) {
+		if (cpg_mssr_is_pm_clk(&clkspec, pd))
+			goto found;
+
+		of_node_put(clkspec.np);
+		i++;
+	}
+
+	return 0;
+
+found:
+	clk = of_clk_get_from_provider(&clkspec);
+	of_node_put(clkspec.np);
+
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	error = pm_clk_create(dev);
+	if (error) {
+		dev_err(dev, "pm_clk_create failed %d\n", error);
+		goto fail_put;
+	}
+
+	error = pm_clk_add_clk(dev, clk);
+	if (error) {
+		dev_err(dev, "pm_clk_add_clk %pC failed %d\n", clk, error);
+		goto fail_destroy;
+	}
+
+	return 0;
+
+fail_destroy:
+	pm_clk_destroy(dev);
+fail_put:
+	clk_put(clk);
+	return error;
+}
+
+static void cpg_mssr_detach_dev(struct generic_pm_domain *genpd,
+				struct device *dev)
+{
+	if (!list_empty(&dev->power.subsys_data->clock_list))
+		pm_clk_destroy(dev);
+}
+
+static int __init cpg_mssr_add_clk_domain(struct device *dev,
+					  const unsigned int *core_pm_clks,
+					  unsigned int num_core_pm_clks)
+{
+	struct device_node *np = dev->of_node;
+	struct generic_pm_domain *genpd;
+	struct cpg_mssr_clk_domain *pd;
+	size_t pm_size = num_core_pm_clks * sizeof(core_pm_clks[0]);
+
+	pd = devm_kzalloc(dev, sizeof(*pd) + pm_size, GFP_KERNEL);
+	if (!pd)
+		return -ENOMEM;
+
+	pd->np = np;
+	pd->num_core_pm_clks = num_core_pm_clks;
+	memcpy(pd->core_pm_clks, core_pm_clks, pm_size);
+
+	genpd = &pd->genpd;
+	genpd->name = np->name;
+	genpd->flags = GENPD_FLAG_PM_CLK;
+	pm_genpd_init(genpd, &simple_qos_governor, false);
+	genpd->attach_dev = cpg_mssr_attach_dev;
+	genpd->detach_dev = cpg_mssr_detach_dev;
+
+	of_genpd_add_provider_simple(np, genpd);
+	return 0;
+}
+#else
+static inline int cpg_mssr_add_clk_domain(struct device *dev,
+					  const unsigned int *core_pm_clks,
+					  unsigned int num_core_pm_clks)
+{
+	return 0;
+}
+#endif /* !CONFIG_PM_GENERIC_DOMAINS_OF */
+
+
+static const struct of_device_id cpg_mssr_match[] = {
+#ifdef CONFIG_ARCH_R8A7795
+	{
+		.compatible = "renesas,r8a7795-cpg-mssr",
+		.data = &r8a7795_cpg_mssr_info,
+	},
+#endif
+	{ /* sentinel */ }
+};
+
+static void cpg_mssr_del_clk_provider(void *data)
+{
+	of_clk_del_provider(data);
+}
+
+static int __init cpg_mssr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	const struct cpg_mssr_info *info;
+	struct cpg_mssr_priv *priv;
+	unsigned int nclks, i;
+	struct resource *res;
+	struct clk **clks;
+	int error;
+
+	info = of_match_node(cpg_mssr_match, np)->data;
+	if (info->init) {
+		error = info->init(dev);
+		if (error)
+			return error;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	spin_lock_init(&priv->mstp_lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	nclks = info->num_total_core_clks + info->num_hw_mod_clks;
+	clks = devm_kmalloc_array(dev, nclks, sizeof(*clks), GFP_KERNEL);
+	if (!clks)
+		return -ENOMEM;
+
+	priv->clks = clks;
+	priv->num_core_clks = info->num_total_core_clks;
+	priv->num_mod_clks = info->num_hw_mod_clks;
+	priv->last_dt_core_clk = info->last_dt_core_clk;
+
+	for (i = 0; i < nclks; i++)
+		clks[i] = ERR_PTR(-ENOENT);
+
+	for (i = 0; i < info->num_core_clks; i++)
+		cpg_mssr_register_core_clk(&info->core_clks[i], info, priv);
+
+	for (i = 0; i < info->num_mod_clks; i++)
+		cpg_mssr_register_mod_clk(&info->mod_clks[i], info, priv);
+
+	error = of_clk_add_provider(np, cpg_mssr_clk_src_twocell_get, priv);
+	if (error)
+		return error;
+
+	devm_add_action(dev, cpg_mssr_del_clk_provider, np);
+
+	error = cpg_mssr_add_clk_domain(dev, info->core_pm_clks,
+					info->num_core_pm_clks);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static struct platform_driver cpg_mssr_driver = {
+	.driver		= {
+		.name	= "renesas-cpg-mssr",
+		.of_match_table = cpg_mssr_match,
+	},
+};
+
+static int __init cpg_mssr_init(void)
+{
+	return platform_driver_probe(&cpg_mssr_driver, cpg_mssr_probe);
+}
+
+subsys_initcall(cpg_mssr_init);
+
+MODULE_DESCRIPTION("Renesas CPG/MSSR Driver");
+MODULE_LICENSE("GPL v2");

drivers/clk/shmobile/renesas-cpg-mssr.h

@@ -0,0 +1,132 @@
+/*
+ * Renesas Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2015 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#ifndef __CLK_RENESAS_CPG_MSSR_H__
+#define __CLK_RENESAS_CPG_MSSR_H__
+
+    /*
+     * Definitions of CPG Core Clocks
+     *
+     * These include:
+     *   - Clock outputs exported to DT
+     *   - External input clocks
+     *   - Internal CPG clocks
+     */
+
+struct cpg_core_clk {
+	/* Common */
+	const char *name;
+	unsigned int id;
+	unsigned int type;
+	/* Depending on type */
+	unsigned int parent;	/* Core Clocks only */
+	unsigned int div;
+	unsigned int mult;
+	unsigned int offset;
+};
+
+enum clk_types {
+	/* Generic */
+	CLK_TYPE_IN,		/* External Clock Input */
+	CLK_TYPE_FF,		/* Fixed Factor Clock */
+	CLK_TYPE_DIV6P1,	/* DIV6 Clock with 1 parent clock */
+
+	/* Custom definitions start here */
+	CLK_TYPE_CUSTOM,
+};
+
+#define DEF_TYPE(_name, _id, _type...)	\
+	{ .name = _name, .id = _id, .type = _type }
+#define DEF_BASE(_name, _id, _type, _parent...)	\
+	DEF_TYPE(_name, _id, _type, .parent = _parent)
+
+#define DEF_INPUT(_name, _id) \
+	DEF_TYPE(_name, _id, CLK_TYPE_IN)
+#define DEF_FIXED(_name, _id, _parent, _div, _mult)	\
+	DEF_BASE(_name, _id, CLK_TYPE_FF, _parent, .div = _div, .mult = _mult)
+#define DEF_DIV6P1(_name, _id, _parent, _offset)	\
+	DEF_BASE(_name, _id, CLK_TYPE_DIV6P1, _parent, .offset = _offset)
+
+
+    /*
+     * Definitions of Module Clocks
+     */
+
+struct mssr_mod_clk {
+	const char *name;
+	unsigned int id;
+	unsigned int parent;	/* Add MOD_CLK_BASE for Module Clocks */
+};
+
+/* Convert from sparse base-100 to packed index space */
+#define MOD_CLK_PACK(x)	((x) - ((x) / 100) * (100 - 32))
+
+#define MOD_CLK_ID(x)	(MOD_CLK_BASE + MOD_CLK_PACK(x))
+
+#define DEF_MOD(_name, _mod, _parent...)	\
+	{ .name = _name, .id = MOD_CLK_ID(_mod), .parent = _parent }
+
+
+struct device_node;
+
+    /**
+     * SoC-specific CPG/MSSR Description
+     *
+     * @core_clks: Array of Core Clock definitions
+     * @num_core_clks: Number of entries in core_clks[]
+     * @last_dt_core_clk: ID of the last Core Clock exported to DT
+     * @num_total_core_clks: Total number of Core Clocks (exported + internal)
+     *
+     * @mod_clks: Array of Module Clock definitions
+     * @num_mod_clks: Number of entries in mod_clks[]
+     * @num_hw_mod_clks: Number of Module Clocks supported by the hardware
+     *
+     * @crit_mod_clks: Array with Module Clock IDs of critical clocks that
+     *                 should not be disabled without a knowledgeable driver
+     * @num_crit_mod_clks: Number of entries in crit_mod_clks[]
+     *
+     * @core_pm_clks: Array with IDs of Core Clocks that are suitable for Power
+     *                Management, in addition to Module Clocks
+     * @num_core_pm_clks: Number of entries in core_pm_clks[]
+     *
+     * @init: Optional callback to perform SoC-specific initialization
+     * @cpg_clk_register: Optional callback to handle special Core Clock types
+     */
+
+struct cpg_mssr_info {
+	/* Core Clocks */
+	const struct cpg_core_clk *core_clks;
+	unsigned int num_core_clks;
+	unsigned int last_dt_core_clk;
+	unsigned int num_total_core_clks;
+
+	/* Module Clocks */
+	const struct mssr_mod_clk *mod_clks;
+	unsigned int num_mod_clks;
+	unsigned int num_hw_mod_clks;
+
+	/* Critical Module Clocks that should not be disabled */
+	const unsigned int *crit_mod_clks;
+	unsigned int num_crit_mod_clks;
+
+	/* Core Clocks suitable for PM, in addition to the Module Clocks */
+	const unsigned int *core_pm_clks;
+	unsigned int num_core_pm_clks;
+
+	/* Callbacks */
+	int (*init)(struct device *dev);
+	struct clk *(*cpg_clk_register)(struct device *dev,
+					const struct cpg_core_clk *core,
+					const struct cpg_mssr_info *info,
+					struct clk **clks, void __iomem *base);
+};
+
+extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
+#endif

drivers/clk/st/clkgen-fsyn.c

@@ -549,19 +549,20 @@ static int clk_fs660c32_vco_get_params(unsigned long input,
 	return 0;
 }
 
-static long quadfs_pll_fs660c32_round_rate(struct clk_hw *hw, unsigned long rate
-		, unsigned long *prate)
+static long quadfs_pll_fs660c32_round_rate(struct clk_hw *hw,
+					   unsigned long rate,
+					   unsigned long *prate)
 {
 	struct stm_fs params;
 
-	if (!clk_fs660c32_vco_get_params(*prate, rate, &params))
-		clk_fs660c32_vco_get_rate(*prate, &params, &rate);
+	if (clk_fs660c32_vco_get_params(*prate, rate, &params))
+		return rate;
 
-	pr_debug("%s: %s new rate %ld [sdiv=0x%x,md=0x%x,pe=0x%x,nsdiv3=%u]\n",
+	clk_fs660c32_vco_get_rate(*prate, &params, &rate);
+
+	pr_debug("%s: %s new rate %ld [ndiv=%u]\n",
 		 __func__, clk_hw_get_name(hw),
-		 rate, (unsigned int)params.sdiv,
-		 (unsigned int)params.mdiv,
-		 (unsigned int)params.pe, (unsigned int)params.nsdiv);
+		 rate, (unsigned int)params.ndiv);
 
 	return rate;
 }

drivers/clk/ti/apll.c

@@ -323,7 +323,7 @@ static void omap2_apll_deny_idle(struct clk_hw_omap *clk)
 	omap2_apll_set_autoidle(clk, OMAP2_APLL_AUTOIDLE_DISABLE);
 }
 
-static struct clk_hw_omap_ops omap2_apll_hwops = {
+static const struct clk_hw_omap_ops omap2_apll_hwops = {
 	.allow_idle	= &omap2_apll_allow_idle,
 	.deny_idle	= &omap2_apll_deny_idle,
 };

drivers/clk/ti/dpll3xxx.c

@@ -305,8 +305,9 @@ static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
 static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 {
 	struct dpll_data *dd = clk->dpll_data;
-	u8 dco, sd_div;
+	u8 dco, sd_div, ai = 0;
 	u32 v;
+	bool errata_i810;
 
 	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
 	_omap3_noncore_dpll_bypass(clk);
@@ -350,6 +351,25 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 		v |= sd_div << __ffs(dd->sddiv_mask);
 	}
 
+	/*
+	 * Errata i810 - DPLL controller can get stuck while transitioning
+	 * to a power saving state. Software must ensure the DPLL can not
+	 * transition to a low power state while changing M/N values.
+	 * Easiest way to accomplish this is to prevent DPLL autoidle
+	 * before doing the M/N re-program.
+	 */
+	errata_i810 = ti_clk_get_features()->flags & TI_CLK_ERRATA_I810;
+
+	if (errata_i810) {
+		ai = omap3_dpll_autoidle_read(clk);
+		if (ai) {
+			omap3_dpll_deny_idle(clk);
+
+			/* OCP barrier */
+			omap3_dpll_autoidle_read(clk);
+		}
+	}
+
 	ti_clk_ll_ops->clk_writel(v, dd->mult_div1_reg);
 
 	/* Set 4X multiplier and low-power mode */
@@ -379,6 +399,9 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 
 	_omap3_noncore_dpll_lock(clk);
 
+	if (errata_i810 && ai)
+		omap3_dpll_allow_idle(clk);
+
 	return 0;
 }
 

drivers/clk/versatile/clk-sp810.c

@@ -95,13 +95,12 @@ static void __init clk_sp810_of_setup(struct device_node *node)
 	int i;
 	bool deprecated;
 
-	if (!sp810) {
-		pr_err("Failed to allocate memory for SP810!\n");
+	if (!sp810)
 		return;
-	}
 
 	if (of_clk_parent_fill(node, parent_names, num) != num) {
 		pr_warn("Failed to obtain parent clocks for SP810!\n");
+		kfree(sp810);
 		return;
 	}