diff --git a/core/hdd/inc/wlan_hdd_cfg.h b/core/hdd/inc/wlan_hdd_cfg.h
index 68ebd4504b5e..52b5fcf729df 100644
--- a/core/hdd/inc/wlan_hdd_cfg.h
+++ b/core/hdd/inc/wlan_hdd_cfg.h
@@ -5302,24 +5302,76 @@ enum hdd_link_speed_rpt_type {
 #define CFG_ENABLE_DYNAMIC_DTIM_DEFAULT    (0)
 
 /*
- * Driver Force ACS is reintroduced for android SAP legacy configuration method.
- * If Driver force acs is enabled, channel/ hw config from hostapd is ignored.
+ * <ini>
+ * gApAutoChannelSelection - Force ACS from ini
+ * @Min: 0
+ * @Max: 1
+ * @Default: 0
+ *
+ * This ini is used to set to enable force acs from driver.
+ * If enabled, channel/ hw config from hostapd is ignored.
  * Driver uses INI params dot11Mode, channel bonding mode and vht chan width
  * to derive ACS HW mode and operating BW.
  *
  * Non android platforms shall not use force ACS method and rely on hostapd
  * driven ACS method for concurrent SAP ACS configuration, OBSS etc.
+ *
+ * Related: Only applicable if gCoalesingInIBSS is 0
+ *
+ * Supported Feature: SAP
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
  */
 #define CFG_FORCE_SAP_ACS                  "gApAutoChannelSelection"
 #define CFG_FORCE_SAP_ACS_MIN              (0)
 #define CFG_FORCE_SAP_ACS_MAX              (1)
 #define CFG_FORCE_SAP_ACS_DEFAULT          (0)
 
+/*
+ * <ini>
+ * gAPChannelSelectStartChannel - start channel for ACS
+ * @Min: 0
+ * @Max: 0xFF
+ * @Default: 1
+ *
+ * This ini is used to set start channel for ACS.
+ * ACS scan will choose channel between force_sap_acs_st_ch
+ * and force_sap_acs_end_ch
+ *
+ * Related: Only applicable gAPChannelSelectEndChannel is set
+ *
+ * Supported Feature: SAP
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
 #define CFG_FORCE_SAP_ACS_START_CH         "gAPChannelSelectStartChannel"
 #define CFG_FORCE_SAP_ACS_START_CH_MIN     (0)
 #define CFG_FORCE_SAP_ACS_START_CH_MAX     (0xFF)
 #define CFG_FORCE_SAP_ACS_START_CH_DEFAULT (1)
 
+/*
+ * <ini>
+ * gAPChannelSelectEndChannel - end channel for ACS
+ * @Min: 0
+ * @Max: 0xFF
+ * @Default: 11
+ *
+ * This ini is used to set end channel for ACS.
+ * ACS scan will choose channel between force_sap_acs_st_ch
+ * and force_sap_acs_end_ch
+ *
+ * Related: Only applicable if gAPChannelSelectStartChannel is set
+ *
+ * Supported Feature: SAP
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
 #define CFG_FORCE_SAP_ACS_END_CH           "gAPChannelSelectEndChannel"
 #define CFG_FORCE_SAP_ACS_END_CH_MIN       (0)
 #define CFG_FORCE_SAP_ACS_END_CH_MAX       (0xFF)
diff --git a/core/hdd/src/wlan_hdd_cfg.c b/core/hdd/src/wlan_hdd_cfg.c
index 837713d9d197..192fed5b46a5 100644
--- a/core/hdd/src/wlan_hdd_cfg.c
+++ b/core/hdd/src/wlan_hdd_cfg.c
@@ -611,29 +611,30 @@ struct reg_table_entry g_registry_table[] = {
 		     CFG_ENABLE_LTE_COEX_DEFAULT,
 		     CFG_ENABLE_LTE_COEX_MIN,
 		     CFG_ENABLE_LTE_COEX_MAX),
+
 	REG_VARIABLE(CFG_FORCE_SAP_ACS, WLAN_PARAM_Integer,
-		struct hdd_config, force_sap_acs,
-		VAR_FLAGS_DYNAMIC_CFG |
-		VAR_FLAGS_OPTIONAL | VAR_FLAGS_RANGE_CHECK_ASSUME_DEFAULT,
-		CFG_FORCE_SAP_ACS_DEFAULT,
-		CFG_FORCE_SAP_ACS_MIN,
-		CFG_FORCE_SAP_ACS_MAX),
+		     struct hdd_config, force_sap_acs,
+		     VAR_FLAGS_DYNAMIC_CFG |
+		     VAR_FLAGS_OPTIONAL | VAR_FLAGS_RANGE_CHECK_ASSUME_DEFAULT,
+		     CFG_FORCE_SAP_ACS_DEFAULT,
+		     CFG_FORCE_SAP_ACS_MIN,
+		     CFG_FORCE_SAP_ACS_MAX),
 
 	REG_VARIABLE(CFG_FORCE_SAP_ACS_START_CH, WLAN_PARAM_Integer,
-		struct hdd_config, force_sap_acs_st_ch,
-		VAR_FLAGS_DYNAMIC_CFG |
-		VAR_FLAGS_OPTIONAL | VAR_FLAGS_RANGE_CHECK_ASSUME_DEFAULT,
-		CFG_FORCE_SAP_ACS_START_CH_DEFAULT,
-		CFG_FORCE_SAP_ACS_START_CH_MIN,
-		CFG_FORCE_SAP_ACS_START_CH_MAX),
+		     struct hdd_config, force_sap_acs_st_ch,
+		     VAR_FLAGS_DYNAMIC_CFG |
+		     VAR_FLAGS_OPTIONAL | VAR_FLAGS_RANGE_CHECK_ASSUME_DEFAULT,
+		     CFG_FORCE_SAP_ACS_START_CH_DEFAULT,
+		     CFG_FORCE_SAP_ACS_START_CH_MIN,
+		     CFG_FORCE_SAP_ACS_START_CH_MAX),
 
 	REG_VARIABLE(CFG_FORCE_SAP_ACS_END_CH, WLAN_PARAM_Integer,
-		struct hdd_config, force_sap_acs_end_ch,
-		VAR_FLAGS_DYNAMIC_CFG |
-		VAR_FLAGS_OPTIONAL | VAR_FLAGS_RANGE_CHECK_ASSUME_DEFAULT,
-		CFG_FORCE_SAP_ACS_END_CH_DEFAULT,
-		CFG_FORCE_SAP_ACS_END_CH_MIN,
-		CFG_FORCE_SAP_ACS_END_CH_MAX),
+		     struct hdd_config, force_sap_acs_end_ch,
+		     VAR_FLAGS_DYNAMIC_CFG |
+		     VAR_FLAGS_OPTIONAL | VAR_FLAGS_RANGE_CHECK_ASSUME_DEFAULT,
+		     CFG_FORCE_SAP_ACS_END_CH_DEFAULT,
+		     CFG_FORCE_SAP_ACS_END_CH_MIN,
+		     CFG_FORCE_SAP_ACS_END_CH_MAX),
 
 	REG_VARIABLE(CFG_AP_KEEP_ALIVE_PERIOD_NAME, WLAN_PARAM_Integer,
 		     struct hdd_config, apKeepAlivePeriod,
diff --git a/core/hdd/src/wlan_hdd_wext.c b/core/hdd/src/wlan_hdd_wext.c
index 7dc7b45b5033..bfbf064d8638 100644
--- a/core/hdd/src/wlan_hdd_wext.c
+++ b/core/hdd/src/wlan_hdd_wext.c
@@ -620,6 +620,24 @@ static const struct ccp_freq_chan_map freq_chan_map[] = {
  * </ioctl>
  */
 #define  WE_PPS_RSSI_CHECK              53
+/*
+ * <ioctl>
+ * setAutoChannel - set ACS enable/disable
+ *
+ * @INPUT: None
+ *
+ * @OUTPUT:  None
+ *
+ * This IOCTL is used to set SAP ACS eanble/disable
+ *
+ * @E.g: iwpriv wlan0 setAutoChannel 0
+ *
+ * Supported Feature: SAP
+ *
+ * Usage: Internal/External
+ *
+ * </ioctl>
+ */
 #define WE_SET_SAP_AUTO_CHANNEL_SELECTION     54
 /*
  * <ioctl>