From d3936da61f3521e2dbbd2871daaf4de1668abccd Mon Sep 17 00:00:00 2001
From: Odelu Kukatla <okukatla@qti.qualcomm.com>
Date: Mon, 2 Mar 2020 15:48:07 +0530
Subject: [PATCH] dt-bindings: interconnect: add interconnect bindings

Add interconnect device bindings. These devices can be
used to describe any RPM and NoC based interconnect devices.

Change-Id: Id7ab380c37f652367da5a5fb9188ed9a29cbe0c0
---
 bindings/interconnect/qcom,holi.txt | 39 +++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 bindings/interconnect/qcom,holi.txt

diff --git a/bindings/interconnect/qcom,holi.txt b/bindings/interconnect/qcom,holi.txt
new file mode 100644
index 000000000000..22e546629415
--- /dev/null
+++ b/bindings/interconnect/qcom,holi.txt
@@ -0,0 +1,39 @@
+QTI HOLI Network-On-Chip interconnect driver binding
+-----------------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+			"qcom,holi-bimc",
+			"qcom,holi-system_noc",
+			"qcom,holi-config_noc",
+			"qcom,holi-qup_virt",
+			"qcom,holi-mmnrt_virt",
+			"qcom,holi-mmrt_virt",
+- #interconnect-cells : should contain 1
+
+reg : specifies the physical base address and size of registers
+clocks : list of phandles and specifiers to all interconnect bus clocks
+clock-names : clock names should include both "bus" and "bus_a"
+
+Examples:
+
+soc {
+	...
+	system_noc: interconnect@1880000 {
+		reg = <0x1880000 0x5f080>;
+		compatible = "qcom,holi-system_noc";
+		#interconnect-cells = <1>;
+		clock-names = "bus", "bus_a";
+		clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+			<&rpmcc RPM_SMD_SNOC_A_CLK>;
+	};
+
+	config_noc: interconnect@1900000 {
+		reg = <0x1900000 0x6200>;
+		compatible = "qcom,holi-config_noc";
+		#interconnect-cells = <1>;
+		clock-names = "bus", "bus_a";
+		clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+			<&rpmcc RPM_SMD_CNOC_A_CLK>;
+	};
+};