From c08f2c23014b63bb10bcd69b5d1207d140c93d9e Mon Sep 17 00:00:00 2001 From: hq_caoqunhui_tmp Date: Thu, 21 Jul 2022 16:07:50 +0800 Subject: [PATCH] dtsi/panel: The panel nt36528 bringup for display Modify: Bringup panel nt36528 panel,add the new panel devicetree. Change-Id: Id23eb97bf3a38d323c40b0abeea127c6139800eb Signed-off-by: hq_caoqunhui_tmp Reviewed-on: https://gerrit.mot.com/2340709 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Hua Tan Submit-Approved: Jira Key --- qcom/dsi-panel-mot-djn-nt36528-653-720x1600-video.dtsi | 2 +- qcom/penang-display.dtsi | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/qcom/dsi-panel-mot-djn-nt36528-653-720x1600-video.dtsi b/qcom/dsi-panel-mot-djn-nt36528-653-720x1600-video.dtsi index 464fda9f9668..06aba9153c22 100644 --- a/qcom/dsi-panel-mot-djn-nt36528-653-720x1600-video.dtsi +++ b/qcom/dsi-panel-mot-djn-nt36528-653-720x1600-video.dtsi @@ -65,7 +65,7 @@ 15 00 00 00 00 00 02 09 AE 15 00 00 00 00 00 02 FF 10 15 00 00 00 00 00 02 FB 01 - 15 00 00 00 00 00 02 51 FF + 39 00 00 00 00 00 03 51 00 00 15 00 00 00 00 00 02 53 2C 15 00 00 00 00 00 02 55 01 05 01 00 00 78 00 01 11 diff --git a/qcom/penang-display.dtsi b/qcom/penang-display.dtsi index 08d105465a33..780ece6eec3c 100644 --- a/qcom/penang-display.dtsi +++ b/qcom/penang-display.dtsi @@ -137,9 +137,9 @@ qcom,bklt-dcs-2bytes-enabled; qcom,mdss-dsi-bl-min-level = <1>; - qcom,mdss-dsi-bl-max-level = <255>; + qcom,mdss-dsi-bl-max-level = <2047>; qcom,mdss-dsi-bl-default-level = <128>; - qcom,mdss-brightness-max-level = <255>; + qcom,mdss-brightness-max-level = <2047>; /*qcom,esd-check-enabled;*/ qcom,mdss-dsi-panel-status-check-mode = "reg_read"; @@ -162,8 +162,8 @@ qcom,mdss-dsi-hbm-type = "lcd-dcs-gpio"; qcom,platform-hbm-en-gpio = <&tlmm 50 0>; - qcom,mdss-dsi-hbm-on-command = [39 01 00 00 00 00 02 51 FF]; - qcom,mdss-dsi-hbm-off-command = [39 01 00 00 00 00 02 51 FF]; + qcom,mdss-dsi-hbm-on-command = [39 01 00 00 00 00 03 51 07 FF]; + qcom,mdss-dsi-hbm-off-command = [39 01 00 00 00 00 03 51 07 FF]; qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0"; qcom,mdss-dsi-t-clk-post = <0x1A>;