The clk tree changes for 3.18 are dominated by clock drivers. Mostly

fixes and enhancements to existing drivers as well as new drivers. This
 tag contains a bit more arch code than I usually take due to some OMAP2+
 changes. Additionally it contains the restart notifier handlers which
 are merged as a dependency into several trees.
 
 The PXA changes are the only messy part. Due to having a stable tree I
 had to revert one patch and follow up with one more fix near the tip of
 this tag. Some dead code is introduced but it will soon become live code
 after 3.18-rc1 is released as the rest of the PXA family is converted
 over to the common clock framework.
 
 Another trend in this tag is that multiple vendors have started to push
 the complexity of changing their CPU frequency into the clock driver,
 whereas this used to be done in CPUfreq drivers.
 
 Changes to the clk core include a generic gpio-clock type and a
 clk_set_phase() function added to the top-level clk.h api. Due to some
 confusion on the fbdev mailing list the kernel boot parameters
 documentation was updated to further explain the clk_ignore_unused
 parameter, which is often required by users of the simplefb driver.
 Finally some fixes to the locking around the clock debugfs stuff was
 done to prevent deadlocks when interacting with other subsystems.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJUMu8gAAoJEDqPOy9afJhJ+GwP/3aU1PzhEPooZ3sZ5hkhmRYc
 RTzNZAODuOGbGnAiNQcr8XW3LJ6wKz5TSzzUC8IQkTcYM1Tsc7s5B6v+nMOkR2Jh
 sfrlnDEV/dsW9/3QADFuBowCaZdsaZnHn96RDhTmyDlPjh4HRR2k8ITT+TREbFrd
 cHDWy4QnI0u4NzhKtitvgW2770HyBpr31v5IdoRhVi5whoiBNL49BPwhwDWhwZVe
 w6qvc0jV8FK9Ra/Q7Vw6r3tiKkpO/upqVFDrsO831mp2qDcQvtOgNW9H2fjcobaX
 3/KCbs1TZs39e71RsEGwCvmCudXkTgO1wUJ86MuCLHeb2o78Vx8EYie02/RApTOJ
 0KGR+kFouggy2naeH8pXiTZk2HWMCbut6NQ1+AVbea5Em7hgHbYaQN71wVFKR4L7
 QL+TugrIg81fGWSvxoTo6fsbEiKOUdhXvHFWP5etKHL+Ll+7ku05ojHLOZgEEwTf
 zFWSSF4XSFQtuQD1gup0pSfoLs6qVR57l8FsrxfRPK9jGttg5z1wyNkY+585ptim
 eyTn4mkvkx9t9Sx47VRj9WPcPr2SW1w8lTMw1WqKfHG7AEUJHHkRQThQmiU82b47
 dTls4BBZ6sVZ8wj0V4zvnvbmtdYohOmBqNDEYx+a0dzPKstcAJyZgcjWBc13zds4
 rIKKxhiU7jGWH4qnJLrx
 =w2rN
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux

Pull clock tree updates from Mike Turquette:
 "The clk tree changes for 3.18 are dominated by clock drivers.  Mostly
  fixes and enhancements to existing drivers as well as new drivers.
  This tag contains a bit more arch code than I usually take due to some
  OMAP2+ changes.  Additionally it contains the restart notifier
  handlers which are merged as a dependency into several trees.

  The PXA changes are the only messy part.  Due to having a stable tree
  I had to revert one patch and follow up with one more fix near the tip
  of this tag.  Some dead code is introduced but it will soon become
  live code after 3.18-rc1 is released as the rest of the PXA family is
  converted over to the common clock framework.

  Another trend in this tag is that multiple vendors have started to
  push the complexity of changing their CPU frequency into the clock
  driver, whereas this used to be done in CPUfreq drivers.

  Changes to the clk core include a generic gpio-clock type and a
  clk_set_phase() function added to the top-level clk.h api.  Due to
  some confusion on the fbdev mailing list the kernel boot parameters
  documentation was updated to further explain the clk_ignore_unused
  parameter, which is often required by users of the simplefb driver.

  Finally some fixes to the locking around the clock debugfs stuff was
  done to prevent deadlocks when interacting with other subsystems."

* tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux: (99 commits)
  clk: pxa clocks build system fix
  Revert "arm: pxa: Transition pxa27x to clk framework"
  clk: samsung: register restart handlers for s3c2412 and s3c2443
  clk: rockchip: add restart handler
  clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate
  doc/kernel-parameters.txt: clarify clk_ignore_unused
  arm: pxa: Transition pxa27x to clk framework
  dts: add devicetree bindings for pxa27x clocks
  clk: add pxa27x clock drivers
  arm: pxa: add clock pll selection bits
  clk: dts: document pxa clock binding
  clk: add pxa clocks infrastructure
  clk: gpio-gate: Ensure gpiod_ APIs are prototyped
  clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safe
  clk: ti: LLVMLinux: Move __init outside of type definition
  clk: ti: consider the fact that of_clk_get() might return an error
  clk: ti: dra7-atl-clock: fix a memory leak
  clk: ti: change clock init to use generic of_clk_init
  clk: hix5hd2: add I2C clocks
  clk: hix5hd2: add watchdog0 clocks
  ...

include/linux/clk-private.h

@@ -46,8 +46,10 @@ struct clk {
 	unsigned int		enable_count;
 	unsigned int		prepare_count;
 	unsigned long		accuracy;
+	int			phase;
 	struct hlist_head	children;
 	struct hlist_node	child_node;
+	struct hlist_node	debug_node;
 	unsigned int		notifier_count;
 #ifdef CONFIG_DEBUG_FS
 	struct dentry		*dentry;

include/linux/clk-provider.h

@@ -13,6 +13,7 @@
 
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/of.h>
 
 #ifdef CONFIG_COMMON_CLK
 
@@ -129,6 +130,14 @@ struct dentry;
  *		set then clock accuracy will be initialized to parent accuracy
  *		or 0 (perfect clock) if clock has no parent.
  *
+ * @get_phase:	Queries the hardware to get the current phase of a clock.
+ *		Returned values are 0-359 degrees on success, negative
+ *		error codes on failure.
+ *
+ * @set_phase:	Shift the phase this clock signal in degrees specified
+ *		by the second argument. Valid values for degrees are
+ *		0-359. Return 0 on success, otherwise -EERROR.
+ *
  * @init:	Perform platform-specific initialization magic.
  *		This is not not used by any of the basic clock types.
  *		Please consider other ways of solving initialization problems
@@ -177,6 +186,8 @@ struct clk_ops {
 				    unsigned long parent_rate, u8 index);
 	unsigned long	(*recalc_accuracy)(struct clk_hw *hw,
 					   unsigned long parent_accuracy);
+	int		(*get_phase)(struct clk_hw *hw);
+	int		(*set_phase)(struct clk_hw *hw, int degrees);
 	void		(*init)(struct clk_hw *hw);
 	int		(*debug_init)(struct clk_hw *hw, struct dentry *dentry);
 };
@@ -488,6 +499,28 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
 		struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
 		unsigned long flags);
 
+/***
+ * struct clk_gpio_gate - gpio gated clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @gpiod:	gpio descriptor
+ *
+ * Clock with a gpio control for enabling and disabling the parent clock.
+ * Implements .enable, .disable and .is_enabled
+ */
+
+struct clk_gpio {
+	struct clk_hw	hw;
+	struct gpio_desc *gpiod;
+};
+
+extern const struct clk_ops clk_gpio_gate_ops;
+struct clk *clk_register_gpio_gate(struct device *dev, const char *name,
+		const char *parent_name, struct gpio_desc *gpio,
+		unsigned long flags);
+
+void of_gpio_clk_gate_setup(struct device_node *node);
+
 /**
  * clk_register - allocate a new clock, register it and return an opaque cookie
  * @dev: device that is registering this clock

include/linux/clk.h

@@ -106,6 +106,25 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
  */
 long clk_get_accuracy(struct clk *clk);
 
+/**
+ * clk_set_phase - adjust the phase shift of a clock signal
+ * @clk: clock signal source
+ * @degrees: number of degrees the signal is shifted
+ *
+ * Shifts the phase of a clock signal by the specified degrees. Returns 0 on
+ * success, -EERROR otherwise.
+ */
+int clk_set_phase(struct clk *clk, int degrees);
+
+/**
+ * clk_get_phase - return the phase shift of a clock signal
+ * @clk: clock signal source
+ *
+ * Returns the phase shift of a clock node in degrees, otherwise returns
+ * -EERROR.
+ */
+int clk_get_phase(struct clk *clk);
+
 #else
 
 static inline long clk_get_accuracy(struct clk *clk)
@@ -113,6 +132,16 @@ static inline long clk_get_accuracy(struct clk *clk)
 	return -ENOTSUPP;
 }
 
+static inline long clk_set_phase(struct clk *clk, int phase)
+{
+	return -ENOTSUPP;
+}
+
+static inline long clk_get_phase(struct clk *clk)
+{
+	return -ENOTSUPP;
+}
+
 #endif
 
 /**

include/linux/clk/ti.h

@@ -292,6 +292,7 @@ void omap2xxx_clkt_vps_init(void);
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, int index);
+void ti_dt_clk_init_retry_clks(void);
 void ti_dt_clockdomains_setup(void);
 int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
 		      ti_of_clk_init_cb_t func);