dt-bindings: Move documentation for DSC line width to SDE node

Add an u32 value to specify the DSC maximum linewidth
hardware restriction in SDE node and remove unused DSC
nodes from DP driver.

Change-Id: I7439efba350c6a70c371f9aaec7cf61b9c15b3c8
This commit is contained in:
Amine Najahi 2020-05-27 09:45:45 -04:00
commit c7186ef74d
2 changed files with 2 additions and 4 deletions

View file

@ -72,8 +72,6 @@ DP Controller: Required properties:
- qcom,mst-enable: MST feature enable control node.
- qcom,dsc-feature-enable: DSC feature enable control node.
- qcom,fec-feature-enable: FEC feature enable control node.
- qcom,max-dp-dsc-blks: An integer specifying the max. DSC blocks available for Display port.
- qcom,max-dp-dsc-input-width-pixs: An integer specifying the max. input width of pixels for each DSC block.
- qcom,altmode-dev: Phandle for the AltMode GLink driver.
- usb-controller: Phandle for the USB controller.
- qcom,pll-revision: PLL hardware revision.
@ -199,8 +197,6 @@ sde_dp: qcom,dp_display@0 {
qcom,mst-enable;
qcom,dsc-feature-enable;
qcom,fec-feature-enable;
qcom,max-dp-dsc-blks = <2>;
qcom,max-dp-dsc-input-width-pixs = <2048>;
vdda-1p2-supply = <&L6B>;
vdda-0p9-supply = <&L1B>;

View file

@ -236,6 +236,7 @@ Optional properties:
- qcom,sde-dsc-native422-supp: Array of flags indicating whether corresponding dsc
block can support native 422 and native 420
encoding.
- qcom,sde-dsc-linewidth: A u32 value indicates the max dsc line width.
- qcom,sde-vdc-off: A u32 offset address for the available vdc blocks.
This offset is calculated from register "mdp_phys"
defined in reg property.
@ -661,6 +662,7 @@ Example:
qcom,sde-mixer-linewidth = <2560>;
qcom,sde-sspp-linewidth = <2560>;
qcom,sde-mixer-blendstages = <0x7>;
qcom,sde-dsc-linewidth = <2048>;
qcom,sde-highest-bank-bit = <0x2>;
qcom,sde-ubwc-version = <0x100>;
qcom,sde-ubwc-static = <0x100>;