mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-30 11:41:38 -04:00
staging/iio driver patches for 4.11-rc1
Here is the big staging and iio driver patchsets for 4.11-rc1. We almost broke even this time around, with only a few thousand lines added overall, as we removed the old and obsolete i4l code, but added some new drivers for the RPi platform, as well as adding some new IIO drivers. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <[email protected]> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2j/w8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymZ1ACdFR4o6xYrWEizmao4a/u+lUZE1aIAnRmcGcIc J+leO1n9bE5iadQvKYUW =sKVA -----END PGP SIGNATURE----- Merge tag 'staging-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/iio driver updates from Greg KH: "Here is the big staging and iio driver patchsets for 4.11-rc1. We almost broke even this time around, with only a few thousand lines added overall, as we removed the old and obsolete i4l code, but added some new drivers for the RPi platform, as well as adding some new IIO drivers. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (669 commits) Staging: vc04_services: Fix the "space prohibited" code style errors Staging: vc04_services: Fix the "wrong indent" code style errors staging: octeon: Use net_device_stats from struct net_device Staging: rtl8192u: ieee80211: ieee80211.h - style fix Staging: rtl8192u: ieee80211: ieee80211_tx.c - style fix Staging: rtl8192u: ieee80211: rtl819x_BAProc.c - style fix Staging: rtl8192u: ieee80211: ieee80211_module.c - style fix Staging: rtl8192u: ieee80211: rtl819x_TSProc.c - style fix Staging: rtl8192u: r8192U.h - style fix Staging: rtl8192u: r8192U_core.c - style fix Staging: rtl8192u: r819xU_cmdpkt.c - style fix staging: rtl8192u: blank lines aren't necessary before a close brace '}' staging: rtl8192u: Adding space after enum and struct definition staging: rtl8192u: Adding space after struct definition Staging: ks7010: Add required and preferred spaces around operators Staging: ks7010: ks*: Remove redundant blank lines Staging: ks7010: ks*: Add missing blank lines after declarations staging: visorbus, replace init_timer with setup_timer staging: vt6656: rxtx.c Removed multiple dereferencing staging: vt6656: Alignment match open parenthesis ...
This commit is contained in:
Linus Torvalds
commit
caa5942897
669 changed files with 25666 additions and 20818 deletions
|
|
@ -36,6 +36,7 @@ dallas,ds1775 Tiny Digital Thermometer and Thermostat
|
|||
dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM
|
||||
dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O
|
||||
dallas,ds75 Digital Thermometer and Thermostat
|
||||
devantech,srf08 Devantech SRF08 ultrasonic ranger
|
||||
dlg,da9053 DA9053: flexible system level PMIC with multicore support
|
||||
dlg,da9063 DA9063: system PMIC for quad-core application processors
|
||||
domintech,dmard09 DMARD09: 3-axis Accelerometer
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@ that apply in on the generic device (independent from the bus).
|
|||
|
||||
|
||||
Required properties for the SPI bindings:
|
||||
- compatible: should be set to "st,lis3lv02d_spi"
|
||||
- compatible: should be set to "st,lis3lv02d-spi"
|
||||
- reg: the chipselect index
|
||||
- spi-max-frequency: maximal bus speed, should be set to 1000000 unless
|
||||
constrained by external circuitry
|
||||
|
|
|
|||
|
|
@ -0,0 +1,32 @@
|
|||
* Amlogic Meson SAR (Successive Approximation Register) A/D converter
|
||||
|
||||
Required properties:
|
||||
- compatible: depending on the SoC this should be one of:
|
||||
- "amlogic,meson-gxbb-saradc" for GXBB
|
||||
- "amlogic,meson-gxl-saradc" for GXL
|
||||
- "amlogic,meson-gxm-saradc" for GXM
|
||||
along with the generic "amlogic,meson-saradc"
|
||||
- reg: the physical base address and length of the registers
|
||||
- clocks: phandle and clock identifier (see clock-names)
|
||||
- clock-names: mandatory clocks:
|
||||
- "clkin" for the reference clock (typically XTAL)
|
||||
- "core" for the SAR ADC core clock
|
||||
optional clocks:
|
||||
- "sana" for the analog clock
|
||||
- "adc_clk" for the ADC (sampling) clock
|
||||
- "adc_sel" for the ADC (sampling) clock mux
|
||||
- vref-supply: the regulator supply for the ADC reference voltage
|
||||
- #io-channel-cells: must be 1, see ../iio-bindings.txt
|
||||
|
||||
Example:
|
||||
saradc: adc@8680 {
|
||||
compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
|
||||
#io-channel-cells = <1>;
|
||||
reg = <0x0 0x8680 0x0 0x34>;
|
||||
clocks = <&xtal>,
|
||||
<&clkc CLKID_SAR_ADC>,
|
||||
<&clkc CLKID_SANA>,
|
||||
<&clkc CLKID_SAR_ADC_CLK>,
|
||||
<&clkc CLKID_SAR_ADC_SEL>;
|
||||
clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
|
||||
};
|
||||
18
Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
Normal file
18
Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
Normal file
|
|
@ -0,0 +1,18 @@
|
|||
* AVIA HX711 ADC chip for weight cells
|
||||
Bit-banging driver
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "avia,hx711"
|
||||
- sck-gpios: Definition of the GPIO for the clock
|
||||
- dout-gpios: Definition of the GPIO for data-out
|
||||
See Documentation/devicetree/bindings/gpio/gpio.txt
|
||||
- avdd-supply: Definition of the regulator used as analog supply
|
||||
|
||||
Example:
|
||||
weight@0 {
|
||||
compatible = "avia,hx711";
|
||||
sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
|
||||
dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
avdd-suppy = <&avdd>;
|
||||
};
|
||||
|
||||
18
Documentation/devicetree/bindings/iio/adc/max11100.txt
Normal file
18
Documentation/devicetree/bindings/iio/adc/max11100.txt
Normal file
|
|
@ -0,0 +1,18 @@
|
|||
* Maxim max11100 Analog to Digital Converter (ADC)
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "maxim,max11100"
|
||||
- reg: the adc unit address
|
||||
- vref-supply: phandle to the regulator that provides reference voltage
|
||||
|
||||
Optional properties:
|
||||
- spi-max-frequency: SPI maximum frequency
|
||||
|
||||
Example:
|
||||
|
||||
max11100: adc@0 {
|
||||
compatible = "maxim,max11100";
|
||||
reg = <0>;
|
||||
vref-supply = <&adc0_vref>;
|
||||
spi-max-frequency = <240000>;
|
||||
};
|
||||
149
Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt
Normal file
149
Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt
Normal file
|
|
@ -0,0 +1,149 @@
|
|||
Qualcomm's PM8xxx voltage XOADC
|
||||
|
||||
The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal
|
||||
oscillator ADC) encompassing PM8018, PM8038, PM8058 and PM8921.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: should be one of:
|
||||
"qcom,pm8018-adc"
|
||||
"qcom,pm8038-adc"
|
||||
"qcom,pm8058-adc"
|
||||
"qcom,pm8921-adc"
|
||||
|
||||
- reg: should contain the ADC base address in the PMIC, typically
|
||||
0x197.
|
||||
|
||||
- xoadc-ref-supply: should reference a regulator that can supply
|
||||
a reference voltage on demand. The reference voltage may vary
|
||||
with PMIC variant but is typically something like 2.2 or 1.8V.
|
||||
|
||||
The following required properties are standard for IO channels, see
|
||||
iio-bindings.txt for more details:
|
||||
|
||||
- #address-cells: should be set to <1>
|
||||
|
||||
- #size-cells: should be set to <0>
|
||||
|
||||
- #io-channel-cells: should be set to <1>
|
||||
|
||||
- interrupts: should refer to the parent PMIC interrupt controller
|
||||
and reference the proper ADC interrupt.
|
||||
|
||||
Required subnodes:
|
||||
|
||||
The ADC channels are configured as subnodes of the ADC. Since some of
|
||||
them are used for calibrating the ADC, these nodes are compulsory:
|
||||
|
||||
adc-channel@c {
|
||||
reg = <0x0c>;
|
||||
};
|
||||
|
||||
adc-channel@d {
|
||||
reg = <0x0d>;
|
||||
};
|
||||
|
||||
adc-channel@f {
|
||||
reg = <0x0f>;
|
||||
};
|
||||
|
||||
These three nodes are used for absolute and ratiometric calibration
|
||||
and only need to have these reg values: they are by hardware definition
|
||||
1:1 ratio converters that sample 625, 1250 and 0 milliV and create
|
||||
an interpolation calibration for all other ADCs.
|
||||
|
||||
Optional subnodes: any channels other than channel 0x0c, 0x0d and
|
||||
0x0f are optional.
|
||||
|
||||
Required channel node properties:
|
||||
|
||||
- reg: should contain the hardware channel number in the range
|
||||
0 .. 0x0f (4 bits). The hardware only supports 16 channels.
|
||||
|
||||
Optional channel node properties:
|
||||
|
||||
- qcom,decimation:
|
||||
Value type: <u32>
|
||||
Definition: This parameter is used to decrease the ADC sampling rate.
|
||||
Quicker measurements can be made by reducing the decimation ratio.
|
||||
Valid values are 512, 1024, 2048, 4096.
|
||||
If the property is not found, a default value of 512 will be used.
|
||||
|
||||
- qcom,ratiometric:
|
||||
Value type: <u32>
|
||||
Definition: Channel calibration type. If this property is specified
|
||||
VADC will use a special voltage references for channel
|
||||
calibration. The available references are specified in the
|
||||
as a u32 value setting (see below) and it is compulsory
|
||||
to also specify this reference if ratiometric calibration
|
||||
is selected.
|
||||
|
||||
If the property is not found, the channel will be
|
||||
calibrated with the 0.625V and 1.25V reference channels, also
|
||||
known as an absolute calibration.
|
||||
The reference voltage pairs when using ratiometric calibration:
|
||||
0 = XO_IN/XOADC_GND
|
||||
1 = PMIC_IN/XOADC_GND
|
||||
2 = PMIC_IN/BMS_CSP
|
||||
3 (invalid)
|
||||
4 = XOADC_GND/XOADC_GND
|
||||
5 = XOADC_VREF/XOADC_GND
|
||||
|
||||
Example:
|
||||
|
||||
xoadc: xoadc@197 {
|
||||
compatible = "qcom,pm8058-adc";
|
||||
reg = <0x197>;
|
||||
interrupt-parent = <&pm8058>;
|
||||
interrupts = <76 1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#io-channel-cells = <1>;
|
||||
|
||||
vcoin: adc-channel@0 {
|
||||
reg = <0x00>;
|
||||
};
|
||||
vbat: adc-channel@1 {
|
||||
reg = <0x01>;
|
||||
};
|
||||
dcin: adc-channel@2 {
|
||||
reg = <0x02>;
|
||||
};
|
||||
ichg: adc-channel@3 {
|
||||
reg = <0x03>;
|
||||
};
|
||||
vph_pwr: adc-channel@4 {
|
||||
reg = <0x04>;
|
||||
};
|
||||
usb_vbus: adc-channel@a {
|
||||
reg = <0x0a>;
|
||||
};
|
||||
die_temp: adc-channel@b {
|
||||
reg = <0x0b>;
|
||||
};
|
||||
ref_625mv: adc-channel@c {
|
||||
reg = <0x0c>;
|
||||
};
|
||||
ref_1250mv: adc-channel@d {
|
||||
reg = <0x0d>;
|
||||
};
|
||||
ref_325mv: adc-channel@e {
|
||||
reg = <0x0e>;
|
||||
};
|
||||
ref_muxoff: adc-channel@f {
|
||||
reg = <0x0f>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
/* IIO client node */
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&xoadc 0x01>, /* Battery */
|
||||
<&xoadc 0x02>, /* DC in (charger) */
|
||||
<&xoadc 0x04>, /* VPH the main system voltage */
|
||||
<&xoadc 0x0b>, /* Die temperature */
|
||||
<&xoadc 0x0c>, /* Reference voltage 1.25V */
|
||||
<&xoadc 0x0d>, /* Reference voltage 0.625V */
|
||||
<&xoadc 0x0e>; /* Reference voltage 0.325V */
|
||||
};
|
||||
|
|
@ -0,0 +1,99 @@
|
|||
* Renesas RCar GyroADC device driver
|
||||
|
||||
The GyroADC block is a reduced SPI block with up to 8 chipselect lines,
|
||||
which supports the SPI protocol of a selected few SPI ADCs. The SPI ADCs
|
||||
are sampled by the GyroADC block in a round-robin fashion and the result
|
||||
presented in the GyroADC registers.
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "<soc-specific>", "renesas,rcar-gyroadc".
|
||||
The <soc-specific> should be one of:
|
||||
renesas,r8a7791-gyroadc - for the GyroADC block present
|
||||
in r8a7791 SoC
|
||||
renesas,r8a7792-gyroadc - for the GyroADC with interrupt
|
||||
block present in r8a7792 SoC
|
||||
- reg: Address and length of the register set for the device
|
||||
- clocks: References to all the clocks specified in the clock-names
|
||||
property as specified in
|
||||
Documentation/devicetree/bindings/clock/clock-bindings.txt.
|
||||
- clock-names: Shall contain "fck" and "if". The "fck" is the GyroADC block
|
||||
clock, the "if" is the interface clock.
|
||||
- power-domains: Must contain a reference to the PM domain, if available.
|
||||
- #address-cells: Should be <1> (setting for the subnodes) for all ADCs
|
||||
except for "fujitsu,mb88101a". Should be <0> (setting for
|
||||
only subnode) for "fujitsu,mb88101a".
|
||||
- #size-cells: Should be <0> (setting for the subnodes)
|
||||
|
||||
Sub-nodes:
|
||||
You must define subnode(s) which select the connected ADC type and reference
|
||||
voltage for the GyroADC channels.
|
||||
|
||||
Required properties for subnodes:
|
||||
- compatible: Should be either of:
|
||||
"fujitsu,mb88101a"
|
||||
- Fujitsu MB88101A compatible mode,
|
||||
12bit sampling, up to 4 channels can be sampled in
|
||||
round-robin fashion. One Fujitsu chip supplies four
|
||||
GyroADC channels with data as it contains four ADCs
|
||||
on the chip and thus for 4-channel operation, single
|
||||
MB88101A is required. The Cx chipselect lines of the
|
||||
MB88101A connect directly to two CHS lines of the
|
||||
GyroADC, no demuxer is required. The data out line
|
||||
of each MB88101A connects to a shared input pin of
|
||||
the GyroADC.
|
||||
"ti,adcs7476" or "ti,adc121" or "adi,ad7476"
|
||||
- TI ADCS7476 / TI ADC121 / ADI AD7476 compatible mode,
|
||||
15bit sampling, up to 8 channels can be sampled in
|
||||
round-robin fashion. One TI/ADI chip supplies single
|
||||
ADC channel with data, thus for 8-channel operation,
|
||||
8 chips are required. A 3:8 chipselect demuxer is
|
||||
required to connect the nCS line of the TI/ADI chips
|
||||
to the GyroADC, while MISO line of each TI/ADI ADC
|
||||
connects to a shared input pin of the GyroADC.
|
||||
"maxim,max1162" or "maxim,max11100"
|
||||
- Maxim MAX1162 / Maxim MAX11100 compatible mode,
|
||||
16bit sampling, up to 8 channels can be sampled in
|
||||
round-robin fashion. One Maxim chip supplies single
|
||||
ADC channel with data, thus for 8-channel operation,
|
||||
8 chips are required. A 3:8 chipselect demuxer is
|
||||
required to connect the nCS line of the MAX chips
|
||||
to the GyroADC, while MISO line of each Maxim ADC
|
||||
connects to a shared input pin of the GyroADC.
|
||||
- reg: Should be the number of the analog input. Should be present
|
||||
for all ADCs except "fujitsu,mb88101a".
|
||||
- vref-supply: Reference to the channel reference voltage regulator.
|
||||
|
||||
Example:
|
||||
vref_max1162: regulator-vref-max1162 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "MAX1162 Vref";
|
||||
regulator-min-microvolt = <4096000>;
|
||||
regulator-max-microvolt = <4096000>;
|
||||
};
|
||||
|
||||
adc@e6e54000 {
|
||||
compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc";
|
||||
reg = <0 0xe6e54000 0 64>;
|
||||
clocks = <&mstp9_clks R8A7791_CLK_GYROADC>, <&clk_65m>;
|
||||
clock-names = "fck", "if";
|
||||
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
|
||||
|
||||
pinctrl-0 = <&adc_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
adc@0 {
|
||||
reg = <0>;
|
||||
compatible = "maxim,max1162";
|
||||
vref-supply = <&vref_max1162>;
|
||||
};
|
||||
|
||||
adc@1 {
|
||||
reg = <1>;
|
||||
compatible = "maxim,max1162";
|
||||
vref-supply = <&vref_max1162>;
|
||||
};
|
||||
};
|
||||
|
|
@ -53,6 +53,11 @@ Required properties:
|
|||
- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
|
||||
Documentation/devicetree/bindings/iio/iio-bindings.txt
|
||||
|
||||
Optional properties:
|
||||
- dmas: Phandle to dma channel for this ADC instance.
|
||||
See ../../dma/dma.txt for details.
|
||||
- dma-names: Must be "rx" when dmas property is being used.
|
||||
|
||||
Example:
|
||||
adc: adc@40012000 {
|
||||
compatible = "st,stm32f4-adc-core";
|
||||
|
|
@ -77,6 +82,8 @@ Example:
|
|||
interrupt-parent = <&adc>;
|
||||
interrupts = <0>;
|
||||
st,adc-channels = <8>;
|
||||
dmas = <&dma2 0 0 0x400 0x0>;
|
||||
dma-names = "rx";
|
||||
};
|
||||
...
|
||||
other adc child nodes follow...
|
||||
|
|
|
|||
23
Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt
Normal file
23
Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt
Normal file
|
|
@ -0,0 +1,23 @@
|
|||
* Texas Instruments ADS7950 family of A/DC chips
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be one of "ti,ads7950", "ti,ads7951", "ti,ads7952",
|
||||
"ti,ads7953", "ti,ads7954", "ti,ads7955", "ti,ads7956", "ti,ads7957",
|
||||
"ti,ads7958", "ti,ads7959", "ti,ads7960", or "ti,ads7961"
|
||||
- reg: SPI chip select number for the device
|
||||
- #io-channel-cells: Must be 1 as per ../iio-bindings.txt
|
||||
- vref-supply: phandle to a regulator node that supplies the 2.5V or 5V
|
||||
reference voltage
|
||||
|
||||
Recommended properties:
|
||||
- spi-max-frequency: Definition as per
|
||||
Documentation/devicetree/bindings/spi/spi-bus.txt
|
||||
|
||||
Example:
|
||||
adc@0 {
|
||||
compatible = "ti,ads7957";
|
||||
reg = <0>;
|
||||
#io-channel-cells = <1>;
|
||||
vref-supply = <&refin_supply>;
|
||||
spi-max-frequency = <10000000>;
|
||||
};
|
||||
36
Documentation/devicetree/bindings/iio/imu/bmi160.txt
Normal file
36
Documentation/devicetree/bindings/iio/imu/bmi160.txt
Normal file
|
|
@ -0,0 +1,36 @@
|
|||
Bosch BMI160 - Inertial Measurement Unit with Accelerometer, Gyroscope
|
||||
and externally connectable Magnetometer
|
||||
|
||||
https://www.bosch-sensortec.com/bst/products/all_products/bmi160
|
||||
|
||||
Required properties:
|
||||
- compatible : should be "bosch,bmi160"
|
||||
- reg : the I2C address or SPI chip select number of the sensor
|
||||
- spi-max-frequency : set maximum clock frequency (only for SPI)
|
||||
|
||||
Optional properties:
|
||||
- interrupt-parent : should be the phandle of the interrupt controller
|
||||
- interrupts : interrupt mapping for IRQ, must be IRQ_TYPE_LEVEL_LOW
|
||||
- interrupt-names : set to "INT1" if INT1 pin should be used as interrupt
|
||||
input, set to "INT2" if INT2 pin should be used instead
|
||||
|
||||
Examples:
|
||||
|
||||
bmi160@68 {
|
||||
compatible = "bosch,bmi160";
|
||||
reg = <0x68>;
|
||||
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-names = "INT1";
|
||||
};
|
||||
|
||||
bmi160@0 {
|
||||
compatible = "bosch,bmi160";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-names = "INT2";
|
||||
};
|
||||
26
Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
Normal file
26
Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
Normal file
|
|
@ -0,0 +1,26 @@
|
|||
* ST_LSM6DSx driver for STM 6-axis (acc + gyro) imu Mems sensors
|
||||
|
||||
Required properties:
|
||||
- compatible: must be one of:
|
||||
"st,lsm6ds3"
|
||||
"st,lsm6dsm"
|
||||
- reg: i2c address of the sensor / spi cs line
|
||||
|
||||
Optional properties:
|
||||
- st,drdy-int-pin: the pin on the package that will be used to signal
|
||||
"data ready" (valid values: 1 or 2).
|
||||
- interrupt-parent: should be the phandle for the interrupt controller
|
||||
- interrupts: interrupt mapping for IRQ. It should be configured with
|
||||
flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING.
|
||||
|
||||
Refer to interrupt-controller/interrupts.txt for generic interrupt
|
||||
client node bindings.
|
||||
|
||||
Example:
|
||||
|
||||
lsm6dsm@6b {
|
||||
compatible = "st,lsm6dsm";
|
||||
reg = <0x6b>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <0 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
41
Documentation/devicetree/bindings/iio/light/cm3605.txt
Normal file
41
Documentation/devicetree/bindings/iio/light/cm3605.txt
Normal file
|
|
@ -0,0 +1,41 @@
|
|||
Capella Microsystems CM3605
|
||||
Ambient Light and Short Distance Proximity Sensor
|
||||
|
||||
The CM3605 is an entirely analog part which however require quite a bit of
|
||||
software logic to interface a host operating system.
|
||||
|
||||
This ALS and proximity sensor was one of the very first deployed in mobile
|
||||
handsets, notably it is used in the very first Nexus One Android phone from
|
||||
2010.
|
||||
|
||||
Required properties:
|
||||
- compatible: must be: "capella,cm3605"
|
||||
- aset-gpios: GPIO line controlling the ASET line (drive low
|
||||
to activate the ALS, should be flagged GPIO_ACTIVE_LOW)
|
||||
- interrupts: the IRQ line (such as a GPIO) that is connected to
|
||||
the POUT (proximity sensor out) line. The edge detection must
|
||||
be set to IRQ_TYPE_EDGE_BOTH so as to detect movements toward
|
||||
and away from the proximity sensor.
|
||||
- io-channels: the ADC channel used for converting the voltage from
|
||||
AOUT to a digital representation.
|
||||
- io-channel-names: must be "aout"
|
||||
|
||||
Optional properties:
|
||||
- vdd-supply: regulator supplying VDD power to the component.
|
||||
- capella,aset-resistance-ohms: the sensitivity calibration resistance,
|
||||
in Ohms. Valid values are: 50000, 100000, 300000 and 600000,
|
||||
as these are the resistance values that we are supplied with
|
||||
calibration curves for. If not supplied, 100 kOhm will be assumed
|
||||
but it is strongly recommended to supply this.
|
||||
|
||||
Example:
|
||||
|
||||
cm3605 {
|
||||
compatible = "capella,cm3605";
|
||||
vdd-supply = <&foo_reg>;
|
||||
aset-gpios = <&foo_gpio 1 GPIO_ACTIVE_LOW>;
|
||||
capella,aset-resistance-ohms = <100000>;
|
||||
interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
|
||||
io-channels = <&adc 0x01>;
|
||||
io-channel-names = "aout";
|
||||
};
|
||||
|
|
@ -0,0 +1,23 @@
|
|||
* Maxim Linear-Taper Digital Potentiometer MAX5481-MAX5484
|
||||
|
||||
The node for this driver must be a child node of a SPI controller, hence
|
||||
all mandatory properties described in
|
||||
|
||||
Documentation/devicetree/bindings/spi/spi-bus.txt
|
||||
|
||||
must be specified.
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be one of the following, depending on the
|
||||
model:
|
||||
"maxim,max5481"
|
||||
"maxim,max5482"
|
||||
"maxim,max5483"
|
||||
"maxim,max5484"
|
||||
|
||||
Example:
|
||||
max548x: max548x@0 {
|
||||
compatible = "maxim,max5482";
|
||||
spi-max-frequency = <7000000>;
|
||||
reg = <0>; /* chip-select */
|
||||
};
|
||||
|
|
@ -27,6 +27,8 @@ standard bindings from pinctrl/pinctrl-bindings.txt.
|
|||
Valid compatible strings:
|
||||
|
||||
Accelerometers:
|
||||
- st,lis3lv02d (deprecated, use st,lis3lv02dl-accel)
|
||||
- st,lis302dl-spi (deprecated, use st,lis3lv02dl-accel)
|
||||
- st,lis3lv02dl-accel
|
||||
- st,lsm303dlh-accel
|
||||
- st,lsm303dlhc-accel
|
||||
|
|
|
|||
35
Documentation/devicetree/bindings/iio/temperature/tmp007.txt
Normal file
35
Documentation/devicetree/bindings/iio/temperature/tmp007.txt
Normal file
|
|
@ -0,0 +1,35 @@
|
|||
* TI TMP007 - IR thermopile sensor with integrated math engine
|
||||
|
||||
Link to datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: should be "ti,tmp007"
|
||||
- reg: the I2C address of the sensor (changeable via ADR pins)
|
||||
------------------------------
|
||||
|ADR1 | ADR0 | Device Address|
|
||||
------------------------------
|
||||
0 0 0x40
|
||||
0 1 0x41
|
||||
0 SDA 0x42
|
||||
0 SCL 0x43
|
||||
1 0 0x44
|
||||
1 1 0x45
|
||||
1 SDA 0x46
|
||||
1 SCL 0x47
|
||||
|
||||
Optional properties:
|
||||
|
||||
- interrupt-parent: should be the phandle for the interrupt controller
|
||||
|
||||
- interrupts: interrupt mapping for GPIO IRQ (level active low)
|
||||
|
||||
Example:
|
||||
|
||||
tmp007@40 {
|
||||
compatible = "ti,tmp007";
|
||||
reg = <0x40>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <5 0x08>;
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,23 @@
|
|||
STMicroelectronics STM32 Timers IIO timer bindings
|
||||
|
||||
Must be a sub-node of an STM32 Timers device tree node.
|
||||
See ../mfd/stm32-timers.txt for details about the parent node.
|
||||
|
||||
Required parameters:
|
||||
- compatible: Must be "st,stm32-timer-trigger".
|
||||
- reg: Identify trigger hardware block.
|
||||
|
||||
Example:
|
||||
timers@40010000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "st,stm32-timers";
|
||||
reg = <0x40010000 0x400>;
|
||||
clocks = <&rcc 0 160>;
|
||||
clock-names = "clk_int";
|
||||
|
||||
timer@0 {
|
||||
compatible = "st,stm32-timer-trigger";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
46
Documentation/devicetree/bindings/mfd/stm32-timers.txt
Normal file
46
Documentation/devicetree/bindings/mfd/stm32-timers.txt
Normal file
|
|
@ -0,0 +1,46 @@
|
|||
STM32 Timers driver bindings
|
||||
|
||||
This IP provides 3 types of timer along with PWM functionality:
|
||||
- advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable
|
||||
prescaler, break input feature, PWM outputs and complementary PWM ouputs channels.
|
||||
- general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a
|
||||
programmable prescaler and PWM outputs.
|
||||
- basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler.
|
||||
|
||||
Required parameters:
|
||||
- compatible: must be "st,stm32-timers"
|
||||
|
||||
- reg: Physical base address and length of the controller's
|
||||
registers.
|
||||
- clock-names: Set to "int".
|
||||
- clocks: Phandle to the clock used by the timer module.
|
||||
For Clk properties, please refer to ../clock/clock-bindings.txt
|
||||
|
||||
Optional parameters:
|
||||
- resets: Phandle to the parent reset controller.
|
||||
See ../reset/st,stm32-rcc.txt
|
||||
|
||||
Optional subnodes:
|
||||
- pwm: See ../pwm/pwm-stm32.txt
|
||||
- timer: See ../iio/timer/stm32-timer-trigger.txt
|
||||
|
||||
Example:
|
||||
timers@40010000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "st,stm32-timers";
|
||||
reg = <0x40010000 0x400>;
|
||||
clocks = <&rcc 0 160>;
|
||||
clock-names = "clk_int";
|
||||
|
||||
pwm {
|
||||
compatible = "st,stm32-pwm";
|
||||
pinctrl-0 = <&pwm1_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
timer@0 {
|
||||
compatible = "st,stm32-timer-trigger";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
35
Documentation/devicetree/bindings/pwm/pwm-stm32.txt
Normal file
35
Documentation/devicetree/bindings/pwm/pwm-stm32.txt
Normal file
|
|
@ -0,0 +1,35 @@
|
|||
STMicroelectronics STM32 Timers PWM bindings
|
||||
|
||||
Must be a sub-node of an STM32 Timers device tree node.
|
||||
See ../mfd/stm32-timers.txt for details about the parent node.
|
||||
|
||||
Required parameters:
|
||||
- compatible: Must be "st,stm32-pwm".
|
||||
- pinctrl-names: Set to "default".
|
||||
- pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module.
|
||||
For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
|
||||
|
||||
Optional parameters:
|
||||
- st,breakinput: One or two <index level filter> to describe break input configurations.
|
||||
"index" indicates on which break input (0 or 1) the configuration
|
||||
should be applied.
|
||||
"level" gives the active level (0=low or 1=high) of the input signal
|
||||
for this configuration.
|
||||
"filter" gives the filtering value to be applied.
|
||||
|
||||
Example:
|
||||
timers@40010000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "st,stm32-timers";
|
||||
reg = <0x40010000 0x400>;
|
||||
clocks = <&rcc 0 160>;
|
||||
clock-names = "clk_int";
|
||||
|
||||
pwm {
|
||||
compatible = "st,stm32-pwm";
|
||||
pinctrl-0 = <&pwm1_pins>;
|
||||
pinctrl-names = "default";
|
||||
st,breakinput = <0 1 5>;
|
||||
};
|
||||
};
|
||||
|
|
@ -40,6 +40,7 @@ atmel Atmel Corporation
|
|||
auo AU Optronics Corporation
|
||||
auvidea Auvidea GmbH
|
||||
avago Avago Technologies
|
||||
avia avia semiconductor
|
||||
avic Shanghai AVIC Optoelectronics Co., Ltd.
|
||||
axentia Axentia Technologies AB
|
||||
axis Axis Communications AB
|
||||
|
|
@ -75,6 +76,7 @@ dallas Maxim Integrated Products (formerly Dallas Semiconductor)
|
|||
davicom DAVICOM Semiconductor, Inc.
|
||||
delta Delta Electronics, Inc.
|
||||
denx Denx Software Engineering
|
||||
devantech Devantech, Ltd.
|
||||
digi Digi International Inc.
|
||||
digilent Diglent, Inc.
|
||||
dlg Dialog Semiconductor
|
||||
|
|
@ -118,6 +120,7 @@ gmt Global Mixed-mode Technology, Inc.
|
|||
goodix Shenzhen Huiding Technology Co., Ltd.
|
||||
google Google, Inc.
|
||||
grinn Grinn
|
||||
grmn Garmin Limited
|
||||
gumstix Gumstix, Inc.
|
||||
gw Gateworks Corporation
|
||||
hannstar HannStar Display Corporation
|
||||
|
|
|
|||
Loading…
Reference in a new issue