diff --git a/qcom/sdxnightjar-pinctrl.dtsi b/qcom/sdxnightjar-pinctrl.dtsi
index 31438ed9f00b..ac2ca4510732 100644
--- a/qcom/sdxnightjar-pinctrl.dtsi
+++ b/qcom/sdxnightjar-pinctrl.dtsi
@@ -1392,7 +1392,7 @@
 		bias-high-impedance;   /* DISABLE GPIO */
 	};
 
-	gpio@c400 { /* GPIO 5 - USB_ID */
+	usb_id_detect: gpio@c400 { /* GPIO 5 - USB_ID */
 		pins = "gpio5";
 		function = "normal";
 		input-enable;        /* Digital input */
diff --git a/qcom/sdxnightjar.dtsi b/qcom/sdxnightjar.dtsi
index 3e91d4b919c5..7074ccf31fbb 100644
--- a/qcom/sdxnightjar.dtsi
+++ b/qcom/sdxnightjar.dtsi
@@ -831,3 +831,26 @@
 #include "sdxnightjar-coresight.dtsi"
 #include "sdxnightjar-pinctrl.dtsi"
 #include "sdxnightjar-blsp.dtsi"
+
+&i2c_3 {
+	status = "ok";
+	smb1351_otg_supply: smb1351-charger@55 {
+		compatible = "qcom,smb1351-charger";
+		reg = <0x55>;
+		interrupt-parent = <&tlmm_pinmux>;
+		interrupts = <83 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&tlmm_pinmux 83 IRQ_TYPE_LEVEL_LOW>, <&pmd9650_gpios 5 0>;
+		interrupt-names = "smb1351_chg_stat_irq","smb1351_usb_id_irq";
+		qcom,usb-id-gpio = <&pmd9650_gpios 5 0>;
+		qcom,float-voltage-mv = <4200>;
+		qcom,charging-timeout = <1536>;
+		qcom,recharge-thresh-mv = <200>;
+		qcom,iterm-ma = <100>;
+		regulator-name = "smb1351_otg_supply";
+		pinctrl-names = "default";
+		pinctrl-0 = <&smb_stat_active>, <&usb_id_detect>;
+		qcom,switch-freq = <2>;
+		qcom,id-line-not-connected;
+		dpdm-supply = <&qusb_phy>;
+	};
+};