diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index a03b070d8d5a..82a0788795b9 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -1169,21 +1169,9 @@ static int sdhci_msm_cm_dll_sdc4_calibration(struct sdhci_host *host)
 		goto out;
 	}
 
-	/*
-	 * Set CORE_PWRSAVE_DLL bit in CORE_VENDOR_SPEC3.
-	 * When MCLK is gated OFF, it is not gated for less than 0.5us
-	 * and MCLK must be switched on for at-least 1us before DATA
-	 * starts coming. Controllers with 14lpp and later tech DLL cannot
-	 * guarantee above requirement. So PWRSAVE_DLL should not be
-	 * turned on for host controllers using this DLL.
-	 */
-	if (!msm_host->use_14lpp_dll_reset) {
-		config = readl_relaxed(host->ioaddr +
-				msm_offset->core_vendor_spec3);
-		config |= CORE_PWRSAVE_DLL;
-		writel_relaxed(config, host->ioaddr +
-				msm_offset->core_vendor_spec3);
-	}
+	config = readl_relaxed(host->ioaddr + msm_offset->core_vendor_spec3);
+	config |= CORE_PWRSAVE_DLL;
+	writel_relaxed(config, host->ioaddr + msm_offset->core_vendor_spec3);
 
 	/*
 	 * Drain writebuffer to ensure above DLL calibration