ARM: SoC platform changes for 3.18

New and updated SoC support. Among the things new for this release are:
 
 - at91: Added support for the new SAMA5D4 SoC, following the earlier SAMA5D3
 - bcm: Added support for BCM63XX family of DSL SoCs
 - hisi: Added support for HiP04 server-class SoC
 - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform
 - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC
 
 Noteworthy changes to existing SoC support are:
 
 - imx: convert i.MX1 to device tree
 - omap: lots of power management work
 - omap: base support to enable moving to standard UART driver
 - shmobile: lots of progress for multiplatform support, still ongoing
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVDWVHWCrR//JCVInAQJQVw/+NEfKWh6blDvLEWHpkmBtzdsT3s+r1wwb
 ATtvd1Q7RlOMEbzxc2J87tJ44yHb64mSPBbC4BCGuQsM5IIvM4potmBphl/XxLfd
 b8PNcI6nvLO+FZOcgon0JWmvVnt+vLGKPUWzURXSRjdrpVRg2qyRpW+nPBnvX4HP
 qyzlSskkYzKm7WJQrIV1K3yYwRLrVZdz4DuF340mSFy+4H+uci2Fw91HJ9lKKmPS
 24Klx2Q4n6wfg946WazWtz21HjEBuMzRCq0CGZrwcTJffRyMxa4iq/kqE3xGbPtN
 onuP1gmAM7UOMewEvc1ZLycY7JyZ3mhKnKduqS/QN2JLLQEY2v1iYFnEKP8mHnnw
 ax6RVi91PC2MSLZyPcRtsegSKB9l16I7H+C5pgTOMgsSaqxSG1JtV1qZl3uwhBnE
 GB45KHPvTFojrH2+CqneNTLET1ozKgwtuHkWTG61/puYeap/VlpRU2OWj2mQF2E0
 SiBzmlbUBpSqzjFgVGD4ywKAuVA/WpJtaOB7Qg26GL2QoNKrY/wsUCY8hU742+jE
 b/N6obGcpmjytLkFRHx+AbYc75DHXkPtF4CWawDeQFW30LUeixZJqewQ61a56QF8
 49DbO6J+sR0n3xlteD49QdQJzDCtKw3BV+VQaFRcxqVDq4LJAxtUHJZ7c3iyvzEi
 6Yt+PsqSP7Y=
 =ZHtj
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support.  Among the things new for this release
  are:

   - at91: Added support for the new SAMA5D4 SoC, following the earlier
     SAMA5D3
   - bcm: Added support for BCM63XX family of DSL SoCs
   - hisi: Added support for HiP04 server-class SoC
   - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform
   - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC

  Noteworthy changes to existing SoC support are:

   - imx: convert i.MX1 to device tree
   - omap: lots of power management work
   - omap: base support to enable moving to standard UART driver
   - shmobile: lots of progress for multiplatform support, still
     ongoing"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits)
  ARM: hisi: depend on ARCH_MULTI_V7
  CNS3xxx: Fix debug UART.
  ARM: at91: fix nommu build regression
  ARM: meson: add basic support for MesonX SoCs
  ARM: meson: debug: add debug UART for earlyprintk support
  irq: Export handle_fasteoi_irq
  ARM: mediatek: Add earlyprintk support for mt6589
  ARM: hisi: Fix platmcpm compilation when ARMv6 is selected
  ARM: debug: fix alphanumerical order on debug uarts
  ARM: at91: document Atmel SMART compatibles
  ARM: at91: add sama5d4 support to sama5_defconfig
  ARM: at91: dt: add device tree file for SAMA5D4ek board
  ARM: at91: dt: add device tree file for SAMA5D4 SoC
  ARM: at91: SAMA5D4 SoC detection code and low level routines
  ARM: at91: introduce basic SAMA5D4 support
  clk: at91: add a driver for the h32mx clock
  ARM: pxa3xx: provide specific platform_devices for all ssp ports
  ARM: pxa: ssp: provide platform_device_id for PXA3xx
  ARM: OMAP4+: Remove static iotable mappings for SRAM
  ARM: OMAP4+: Move SRAM data to DT
  ...

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -1,6 +1,43 @@
 Atmel AT91 device tree bindings.
 ================================
 
+Boards with a SoC of the Atmel AT91 or SMART family shall have the following
+properties:
+
+Required root node properties:
+compatible: must be one of:
+ * "atmel,at91rm9200"
+
+ * "atmel,at91sam9" for SoCs using an ARM926EJ-S core, shall be extended with
+   the specific SoC family or compatible:
+    o "atmel,at91sam9260"
+    o "atmel,at91sam9261"
+    o "atmel,at91sam9263"
+    o "atmel,at91sam9x5" for the 5 series, shall be extended with the specific
+      SoC compatible:
+       - "atmel,at91sam9g15"
+       - "atmel,at91sam9g25"
+       - "atmel,at91sam9g35"
+       - "atmel,at91sam9x25"
+       - "atmel,at91sam9x35"
+    o "atmel,at91sam9g20"
+    o "atmel,at91sam9g45"
+    o "atmel,at91sam9n12"
+    o "atmel,at91sam9rl"
+ * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
+   SoC family:
+    o "atmel,sama5d3" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d31"
+       - "atmel,sama5d33"
+       - "atmel,sama5d34"
+       - "atmel,sama5d35"
+       - "atmel,sama5d36"
+    o "atmel,sama5d4" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d41"
+       - "atmel,sama5d42"
+       - "atmel,sama5d43"
+       - "atmel,sama5d44"
+
 PIT Timer required properties:
 - compatible: Should be "atmel,at91sam9260-pit"
 - reg: Should contain registers location and length

Documentation/devicetree/bindings/arm/bcm/bcm63138.txt

@@ -0,0 +1,9 @@
+Broadcom BCM63138 DSL System-on-a-Chip device tree bindings
+-----------------------------------------------------------
+
+Boards compatible with the BCM63138 DSL System-on-a-Chip should have the
+following properties:
+
+Required root node property:
+
+compatible: should be "brcm,bcm63138"

Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

@@ -5,6 +5,11 @@ Hi4511 Board
 Required root node properties:
 	- compatible = "hisilicon,hi3620-hi4511";
 
+HiP04 D01 Board
+Required root node properties:
+	- compatible = "hisilicon,hip04-d01";
+
+
 Hisilicon system controller
 
 Required properties:
@@ -55,3 +60,21 @@ Example:
 		compatible = "hisilicon,pctrl";
 		reg = <0xfca09000 0x1000>;
 	};
+
+-----------------------------------------------------------------------
+Fabric:
+
+Required Properties:
+- compatible: "hisilicon,hip04-fabric";
+- reg: Address and size of Fabric
+
+-----------------------------------------------------------------------
+Bootwrapper boot method (software protocol on SMP):
+
+Required Properties:
+- compatible: "hisilicon,hip04-bootwrapper";
+- boot-method: Address and size of boot method.
+  [0]: bootwrapper physical address
+  [1]: bootwrapper size
+  [2]: relocation physical address
+  [3]: relocation size

Documentation/devicetree/bindings/arm/omap/mpu.txt

@@ -10,6 +10,9 @@ Required properties:
 	       Should be "ti,omap5-mpu" for OMAP5
 - ti,hwmods: "mpu"
 
+Optional properties:
+- sram:	Phandle to the ocmcram node
+
 Examples:
 
 - For an OMAP5 SMP system:

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt

@@ -0,0 +1,12 @@
+NVIDIA Tegra Flow Controller
+
+Required properties:
+- compatible: Should be "nvidia,tegra<chip>-flowctrl"
+- reg: Should contain one register range (address and length)
+
+Example:
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra20-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};

Documentation/devicetree/bindings/clock/at91-clock.txt

@@ -74,6 +74,9 @@ Required properties:
 	"atmel,at91sam9x5-clk-utmi":
 		at91 utmi clock
 
+	"atmel,sama5d4-clk-h32mx":
+		at91 h32mx clock
+
 Required properties for SCKC node:
 - reg : defines the IO memory reserved for the SCKC.
 - #size-cells : shall be 0 (reg is used to encode clk id).
@@ -447,3 +450,14 @@ For example:
 		#clock-cells = <0>;
 		clocks = <&main>;
 	};
+
+Required properties for 32 bits bus Matrix clock (h32mx clock):
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the master clock source phandle.
+
+For example:
+	h32ck: h32mxck {
+		#clock-cells = <0>;
+		compatible = "atmel,sama5d4-clk-h32mx";
+		clocks = <&mck>;
+	};

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

@@ -11,9 +11,11 @@ Required Properties:
 
   - compatible: Must be one of the following
     - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
+    - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks
     - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
     - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
     - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
+    - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks
     - "renesas,cpg-mstp-clock" for generic MSTP gate clocks
   - reg: Base address and length of the I/O mapped registers used by the MSTP
     clocks. The first register is the clock control register and is mandatory.

Documentation/devicetree/bindings/memory-controllers/synopsys.txt

@@ -0,0 +1,11 @@
+Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
+
+Required properties:
+ - compatible: Should be 'xlnx,zynq-ddrc-a05'
+ - reg: Base address and size of the controllers memory area
+
+Example:
+	memory-controller@f8006000 {
+		compatible = "xlnx,zynq-ddrc-a05";
+		reg = <0xf8006000 0x1000>;
+	};