diff --git a/qcom/lahaina-cdp.dtsi b/qcom/lahaina-cdp.dtsi
index 2e3ab49ddbbe..1aac5c1d094c 100644
--- a/qcom/lahaina-cdp.dtsi
+++ b/qcom/lahaina-cdp.dtsi
@@ -1,5 +1,28 @@
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 #include "lahaina-pmic-overlay.dtsi"
 
 &spmi_debug_bus {
 	status = "ok";
 };
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_vol_up_default>;
+
+		vol_up {
+			label = "volume_up";
+			gpios = <&pm8350_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			gpio-key,wakeup;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+};
diff --git a/qcom/lahaina-mtp.dtsi b/qcom/lahaina-mtp.dtsi
index 2e3ab49ddbbe..1aac5c1d094c 100644
--- a/qcom/lahaina-mtp.dtsi
+++ b/qcom/lahaina-mtp.dtsi
@@ -1,5 +1,28 @@
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 #include "lahaina-pmic-overlay.dtsi"
 
 &spmi_debug_bus {
 	status = "ok";
 };
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_vol_up_default>;
+
+		vol_up {
+			label = "volume_up";
+			gpios = <&pm8350_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			gpio-key,wakeup;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+};
diff --git a/qcom/lahaina-pmic-overlay.dtsi b/qcom/lahaina-pmic-overlay.dtsi
index e01ee2450d01..97894d30dd64 100644
--- a/qcom/lahaina-pmic-overlay.dtsi
+++ b/qcom/lahaina-pmic-overlay.dtsi
@@ -6,3 +6,15 @@
 #include "pm8350b.dtsi"
 #include "pmr735a.dtsi"
 #include "pmr735b.dtsi"
+
+&pm8350_gpios {
+	key_vol_up {
+		key_vol_up_default: key_vol_up_default {
+			pins = "gpio6";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			power-source = <1>;
+		};
+	};
+};
diff --git a/qcom/lahaina-qrd.dtsi b/qcom/lahaina-qrd.dtsi
index 2e3ab49ddbbe..1aac5c1d094c 100644
--- a/qcom/lahaina-qrd.dtsi
+++ b/qcom/lahaina-qrd.dtsi
@@ -1,5 +1,28 @@
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 #include "lahaina-pmic-overlay.dtsi"
 
 &spmi_debug_bus {
 	status = "ok";
 };
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_vol_up_default>;
+
+		vol_up {
+			label = "volume_up";
+			gpios = <&pm8350_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			gpio-key,wakeup;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+};
diff --git a/qcom/pmk8350.dtsi b/qcom/pmk8350.dtsi
index 355dedbd2c30..127ff74d5b85 100644
--- a/qcom/pmk8350.dtsi
+++ b/qcom/pmk8350.dtsi
@@ -1,4 +1,5 @@
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/input/qcom,qpnp-power-on.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
@@ -14,6 +15,31 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pon_pbs@800 {
+			compatible = "qcom,qpnp-power-on";
+			reg = <0x800>;
+			qcom,system-reset;
+			qcom,store-hard-reset-reason;
+		};
+
+		pon_hlos@1300 {
+			compatible = "qcom,qpnp-power-on";
+			reg = <0x1300>;
+			interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "kpdpwr", "resin";
+
+			qcom,pon_1 {
+				qcom,pon-type = <PON_POWER_ON_TYPE_KPDPWR>;
+				linux,code = <KEY_POWER>;
+			};
+
+			qcom,pon_2 {
+				qcom,pon-type = <PON_POWER_ON_TYPE_RESIN>;
+				linux,code = <KEY_VOLUMEDOWN>;
+			};
+		};
+
 		pmk8350_sdam_2: sdam@7100 {
 			compatible = "qcom,spmi-sdam";
 			reg = <0x7100>;