Merge branches 'arm', 'at91', 'ep93xx', 'iop', 'ks8695', 'misc', 'mxc', 'ns9x', 'orion', 'pxa', 'sa1100', 's3c' and 'sparsemem' into devel

This commit is contained in:
287 changed files with 21672 additions and 7029 deletions

View file

@ -27,7 +27,10 @@ extern int __devexit __pata_platform_remove(struct device *dev);
/*
* Marvell SATA private data
*/
struct mbus_dram_target_info;
struct mv_sata_platform_data {
struct mbus_dram_target_info *dram;
int n_ports; /* number of sata ports */
};

36
include/linux/mbus.h Normal file
View file

@ -0,0 +1,36 @@
/*
* Marvell MBUS common definitions.
*
* Copyright (C) 2008 Marvell Semiconductor
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __LINUX_MBUS_H
#define __LINUX_MBUS_H
struct mbus_dram_target_info
{
/*
* The 4-bit MBUS target ID of the DRAM controller.
*/
u8 mbus_dram_target_id;
/*
* The base address, size, and MBUS attribute ID for each
* of the possible DRAM chip selects. Peripherals are
* required to support at least 4 decode windows.
*/
int num_cs;
struct mbus_dram_window {
u8 cs_index;
u8 mbus_attr;
u32 base;
u32 size;
} cs[4];
};
#endif

View file

@ -0,0 +1,57 @@
/*
* HTC simple EGPIO irq and gpio extender
*/
#ifndef __HTC_EGPIO_H__
#define __HTC_EGPIO_H__
#include <linux/gpio.h>
/* Descriptive values for all-in or all-out htc_egpio_chip descriptors. */
#define HTC_EGPIO_OUTPUT (~0)
#define HTC_EGPIO_INPUT 0
/**
* struct htc_egpio_chip - descriptor to create gpio_chip for register range
* @reg_start: index of first register
* @gpio_base: gpio number of first pin in this register range
* @num_gpios: number of gpios in this register range, max BITS_PER_LONG
* (number of registers = DIV_ROUND_UP(num_gpios, reg_width))
* @direction: bitfield, '0' = input, '1' = output,
*/
struct htc_egpio_chip {
int reg_start;
int gpio_base;
int num_gpios;
unsigned long direction;
unsigned long initial_values;
};
/**
* struct htc_egpio_platform_data - description provided by the arch
* @irq_base: beginning of available IRQs (eg, IRQ_BOARD_START)
* @num_irqs: number of irqs
* @reg_width: number of bits per register, either 8 or 16 bit
* @bus_width: alignment of the registers, either 16 or 32 bit
* @invert_acks: set if chip requires writing '0' to ack an irq, instead of '1'
* @ack_register: location of the irq/ack register
* @chip: pointer to array of htc_egpio_chip descriptors
* @num_chips: number of egpio chip descriptors
*/
struct htc_egpio_platform_data {
int bus_width;
int reg_width;
int irq_base;
int num_irqs;
int invert_acks;
int ack_register;
struct htc_egpio_chip *chip;
int num_chips;
};
/* Determine the wakeup irq, to be called during early resume */
extern int htc_egpio_get_wakeup_irq(struct device *dev);
#endif

View file

@ -0,0 +1,55 @@
/*
* HTC PASIC3 driver - LEDs and DS1WM
*
* Copyright (c) 2007 Philipp Zabel <philipp.zabel@gmail.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
*/
#ifndef __PASIC3_H
#define __PASIC3_H
#include <linux/platform_device.h>
#include <linux/leds.h>
extern void pasic3_write_register(struct device *dev, u32 reg, u8 val);
extern u8 pasic3_read_register(struct device *dev, u32 reg);
/*
* mask for registers 0x20,0x21,0x22
*/
#define PASIC3_MASK_LED0 0x04
#define PASIC3_MASK_LED1 0x08
#define PASIC3_MASK_LED2 0x40
/*
* bits in register 0x06
*/
#define PASIC3_BIT2_LED0 0x08
#define PASIC3_BIT2_LED1 0x10
#define PASIC3_BIT2_LED2 0x20
struct pasic3_led {
struct led_classdev led;
unsigned int hw_num;
unsigned int bit2;
unsigned int mask;
struct pasic3_leds_machinfo *pdata;
};
struct pasic3_leds_machinfo {
unsigned int num_leds;
unsigned int power_gpio;
struct pasic3_led *leds;
};
struct pasic3_platform_data {
struct pasic3_leds_machinfo *led_pdata;
unsigned int bus_shift;
unsigned int clock_rate;
};
#endif

View file

@ -1541,6 +1541,12 @@ static inline void idle_task_exit(void) {}
extern void sched_idle_next(void);
#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
extern void wake_up_idle_cpu(int cpu);
#else
static inline void wake_up_idle_cpu(int cpu) { }
#endif
#ifdef CONFIG_SCHED_DEBUG
extern unsigned int sysctl_sched_latency;
extern unsigned int sysctl_sched_min_granularity;