A-Team_Digital_Solutions/android_kernel_motorola_sm6375
Watch
2
0
Fork
You've already forked android_kernel_motorola_sm6375
 0
mirror of https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git synced 2026-10-24 13:44:26 -04:00
Code Issues Projects Releases Packages Wiki Activity

- New Drivers

Browse source 
- Freescale MXS Low Resolution ADC
    - Freescale i.MX23/i.MX28 LRADC touchscreen
    - Motorola CPCAP Power Button
    - TI LMU (Lighting Management Unit)
    - Atmel SMC (Static Memory Controller)
 
  - New Device Support
    - Add support for X-Powers AXP803 to axp20x
    - Add support for Dialog Semi DA9061 to da9062-core
    - Add support for Intel Cougar Mountain to lpc_ich
    - Add support for Intel Gemini Lake to lpc_ich
 
  - New Functionality
    - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc
    - Add IRQ sense support; motorola-cpcap
    - Add ACPI support; cros_ec
    - Add Reset support; altera-a10sr
    - Add ADC support; axp20x
    - Add AC Power support; axp20x
    - Add Runtime PM support; atmel-ebi, exynos-lpass
    - Add Battery Power Supply support; axp20x
    - Add Clock support; exynos-lpass, hi655x-pmic
 
  - Fix-ups
    - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc
    - Add .remove() method; stm32-timers, exynos-lpass
    - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus
    - Rename variables for clarity; axp20x
    - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power
    - Improve formatting; arizona-core, axp20x
    - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb
    - Simplify/refactor code; arizona-core, atmel-ebi
    - Improve error checking; intel_soc_pmic_core
 
  - Bug Fixes
    - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power
    - Correct max-register value; stm32-timers
    - Extend timeout to account for clock stretching; cros_ec_spi
    - Use correct IRQ trigger type; motorola-cpcap
    - Fix bad use of IRQ sense register; motorola-cpcap
    - Logic error "||" should be "&&"; mxs-lradc-ts
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZAdDwAAoJEFGvii+H/HdhViMQAJ7Of3xKiS/P1d7RiOhs2OMY
 41R4GojoY2QSurndIbV/PBUbNMlJiqvIawbFCBz7rAZnIv6NatFQGCQnATci8iDV
 tFxz2m705ifstSQTWUr2ykRdNUdKkShLPHdbjs0ZbpV6Xa5tIXT0U7WpdDr+J51B
 422JHx8tVFrktkYCjg7VASKU9hzz8iRSbdpfu6ZitTT3yrr5Ivl0gaCCmXVyWTsF
 fy8DFvEpsAS1pToXGGeZHueTDIgePyEjwT+By6TuDvkObxvCbVrdhKrJnORfHRKx
 +aidbb4E8/ZNYmRERwl4VkAR7y2tenQat/Si+4rtwYHNTcapjjpdEElQTKkIAUpy
 L5Y9Ai0/ihDXpCPmMnf7omnt3qxAltE4voUk2WUIxDOiaFl6XwyxFPDoy5l8T2IM
 i1akRFss/lov9r3dWzxApTdMNwEdeXnHbZgW60h6RHyCH3dqfN3dFcfu9IX/ua01
 HHI4ltkmaokXJmwvpa+/oVxGAfcoS5AGRw1uRfIN1fbjIxEeRS4I8iogqneVQ5GJ
 D766JIhuf1KKBIWu5DYwfCyTgSdBnEt/J/vTIe4zOZrBk/StbeygWfhUMRSutglK
 eORpwzsX8DnS4SYRErCcRRlePB/NU2GvmHOXSApSem9ifHx8sQGM7QZt2am5JYRp
 q/6gViepBHxrA8Xv6mWJ
 =SHiw
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Freescale MXS Low Resolution ADC
   - Freescale i.MX23/i.MX28 LRADC touchscreen
   - Motorola CPCAP Power Button
   - TI LMU (Lighting Management Unit)
   - Atmel SMC (Static Memory Controller)

  New Device Support:
   - Add support for X-Powers AXP803 to axp20x
   - Add support for Dialog Semi DA9061 to da9062-core
   - Add support for Intel Cougar Mountain to lpc_ich
   - Add support for Intel Gemini Lake to lpc_ich

  New Functionality:
   - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc
   - Add IRQ sense support; motorola-cpcap
   - Add ACPI support; cros_ec
   - Add Reset support; altera-a10sr
   - Add ADC support; axp20x
   - Add AC Power support; axp20x
   - Add Runtime PM support; atmel-ebi, exynos-lpass
   - Add Battery Power Supply support; axp20x
   - Add Clock support; exynos-lpass, hi655x-pmic

  Fix-ups:
   - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc
   - Add .remove() method; stm32-timers, exynos-lpass
   - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus
   - Rename variables for clarity; axp20x
   - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power
   - Improve formatting; arizona-core, axp20x
   - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb
   - Simplify/refactor code; arizona-core, atmel-ebi
   - Improve error checking; intel_soc_pmic_core

  Bug Fixes:
   - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power
   - Correct max-register value; stm32-timers
   - Extend timeout to account for clock stretching; cros_ec_spi
   - Use correct IRQ trigger type; motorola-cpcap
   - Fix bad use of IRQ sense register; motorola-cpcap
   - Logic error "||" should be "&&"; mxs-lradc-ts"

* tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits)
  input: touchscreen: mxs-lradc: || vs && typos
  dt-bindings: Add AXP803's regulator info
  mfd: axp20x: Support AXP803 variant
  dt-bindings: Add device tree binding for X-Powers AXP803 PMIC
  dt-bindings: Make AXP20X compatible strings one per line
  mfd: intel_soc_pmic_core: Fix unchecked return value
  mfd: menelaus: Remove obsolete local_irq_disable() and local_irq_enable()
  mfd: omap-usb-tll: Configure ULPIAUTOIDLE
  mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  mfd: palmas: Fixed spelling mistake in error message
  mfd: lpc_ich: Add support for Intel Gemini Lake SoC
  mfd: hi655x: Add the clock cell to provide WiFi and Bluetooth
  mfd: intel_soc_pmic: Fix a mess with compilation units
  mfd: exynos-lpass: Add runtime PM support
  mfd: exynos-lpass: Add missing remove() function
  mfd: exynos-lpass: Add support for clocks
  mfd: exynos-lpass: Remove pad retention control
  iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  mfd: cpcap: Fix bad use of IRQ sense register
  mfd: cpcap: Use ack_invert interrupts
  ...
This commit is contained in:
Linus Torvalds 2017-05-03 12:16:25 -07:00
commit d26f552ebb
80 changed files with 5573 additions and 2566 deletions
Download patch file Download diff file Expand all files Collapse all files

10
drivers/input/misc/Kconfig
View file

@ -316,6 +316,16 @@ config INPUT_COBALT_BTNS
To compile this driver as a module, choose M here: the
module will be called cobalt_btns.
config INPUT_CPCAP_PWRBUTTON
tristate "CPCAP OnKey"
depends on MFD_CPCAP
help
Say Y here if you want to enable power key reporting via the
Motorola CPCAP chip.
To compile this driver as a module, choose M here. The module will
be called cpcap-pwrbutton.
config INPUT_WISTRON_BTNS
tristate "x86 Wistron laptop button interface"
depends on X86_32

1
drivers/input/misc/Makefile
View file

@ -24,6 +24,7 @@ obj-$(CONFIG_INPUT_CM109) += cm109.o
obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o
obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o
obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
obj-$(CONFIG_INPUT_CPCAP_PWRBUTTON) += cpcap-pwrbutton.o
obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o
obj-$(CONFIG_INPUT_DA9063_ONKEY) += da9063_onkey.o

117
drivers/input/misc/cpcap-pwrbutton.c Normal file
View file

@ -0,0 +1,117 @@
/**
* CPCAP Power Button Input Driver
*
* Copyright (C) 2017 Sebastian Reichel <sre@kernel.org>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file "COPYING" in the main directory of this
* archive for more details.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/regmap.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/mfd/motorola-cpcap.h>
#define CPCAP_IRQ_ON 23
#define CPCAP_IRQ_ON_BITMASK (1 << (CPCAP_IRQ_ON % 16))
struct cpcap_power_button {
struct regmap *regmap;
struct input_dev *idev;
struct device *dev;
};
static irqreturn_t powerbutton_irq(int irq, void *_button)
{
struct cpcap_power_button *button = _button;
int val;
val = cpcap_sense_virq(button->regmap, irq);
if (val < 0) {
dev_err(button->dev, "irq read failed: %d", val);
return IRQ_HANDLED;
}
pm_wakeup_event(button->dev, 0);
input_report_key(button->idev, KEY_POWER, val);
input_sync(button->idev);
return IRQ_HANDLED;
}
static int cpcap_power_button_probe(struct platform_device *pdev)
{
struct cpcap_power_button *button;
int irq = platform_get_irq(pdev, 0);
int err;
button = devm_kmalloc(&pdev->dev, sizeof(*button), GFP_KERNEL);
if (!button)
return -ENOMEM;
button->idev = devm_input_allocate_device(&pdev->dev);
if (!button->idev)
return -ENOMEM;
button->regmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!button->regmap)
return -ENODEV;
button->dev = &pdev->dev;
button->idev->name = "cpcap-pwrbutton";
button->idev->phys = "cpcap-pwrbutton/input0";
button->idev->dev.parent = button->dev;
input_set_capability(button->idev, EV_KEY, KEY_POWER);
err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
powerbutton_irq, IRQF_ONESHOT, "cpcap_pwrbutton", button);
if (err < 0) {
dev_err(&pdev->dev, "IRQ request failed: %d\n", err);
return err;
}
err = input_register_device(button->idev);
if (err) {
dev_err(&pdev->dev, "Input register failed: %d\n", err);
return err;
}
device_init_wakeup(&pdev->dev, true);
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id cpcap_pwrbutton_dt_match_table[] = {
{ .compatible = "motorola,cpcap-pwrbutton" },
{},
};
MODULE_DEVICE_TABLE(of, cpcap_pwrbutton_dt_match_table);
#endif
static struct platform_driver cpcap_power_button_driver = {
.probe = cpcap_power_button_probe,
.driver = {
.name = "cpcap-pwrbutton",
.of_match_table = of_match_ptr(cpcap_pwrbutton_dt_match_table),
},
};
module_platform_driver(cpcap_power_button_driver);
MODULE_ALIAS("platform:cpcap-pwrbutton");
MODULE_DESCRIPTION("CPCAP Power Button");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Sebastian Reichel <sre@kernel.org>");

10
drivers/input/touchscreen/Kconfig
View file

@ -829,6 +829,16 @@ config TOUCHSCREEN_USB_COMPOSITE
To compile this driver as a module, choose M here: the
module will be called usbtouchscreen.
config TOUCHSCREEN_MXS_LRADC
tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
depends on MFD_MXS_LRADC
help
Say Y here if you have a touchscreen connected to the low-resolution
analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
To compile this driver as a module, choose M here: the module will be
called mxs-lradc-ts.
config TOUCHSCREEN_MX25
tristate "Freescale i.MX25 touchscreen input driver"
depends on MFD_MX25_TSADC

1
drivers/input/touchscreen/Makefile
View file

@ -45,6 +45,7 @@ obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o
obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o
obj-$(CONFIG_TOUCHSCREEN_MAX11801) += max11801_ts.o
obj-$(CONFIG_TOUCHSCREEN_MXS_LRADC) += mxs-lradc-ts.o
obj-$(CONFIG_TOUCHSCREEN_MX25) += fsl-imx25-tcq.o
obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o
obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o

714
drivers/input/touchscreen/mxs-lradc-ts.c Normal file
View file

@ -0,0 +1,714 @@
/*
* Freescale MXS LRADC touchscreen driver
*
* Copyright (c) 2012 DENX Software Engineering, GmbH.
* Copyright (c) 2017 Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
*
* Authors:
* Marek Vasut <marex@denx.de>
* Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/device.h>
#include <linux/err.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/mfd/core.h>
#include <linux/mfd/mxs-lradc.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
const char *mxs_lradc_ts_irq_names[] = {
"mxs-lradc-touchscreen",
"mxs-lradc-channel6",
"mxs-lradc-channel7",
};
/*
* Touchscreen handling
*/
enum mxs_lradc_ts_plate {
LRADC_TOUCH = 0,
LRADC_SAMPLE_X,
LRADC_SAMPLE_Y,
LRADC_SAMPLE_PRESSURE,
LRADC_SAMPLE_VALID,
};
struct mxs_lradc_ts {
struct mxs_lradc *lradc;
struct device *dev;
void __iomem *base;
/*
* When the touchscreen is enabled, we give it two private virtual
* channels: #6 and #7. This means that only 6 virtual channels (instead
* of 8) will be available for buffered capture.
*/
#define TOUCHSCREEN_VCHANNEL1 7
#define TOUCHSCREEN_VCHANNEL2 6
struct input_dev *ts_input;
enum mxs_lradc_ts_plate cur_plate; /* state machine */
bool ts_valid;
unsigned int ts_x_pos;
unsigned int ts_y_pos;
unsigned int ts_pressure;
/* handle touchscreen's physical behaviour */
/* samples per coordinate */
unsigned int over_sample_cnt;
/* time clocks between samples */
unsigned int over_sample_delay;
/* time in clocks to wait after the plates where switched */
unsigned int settling_delay;
spinlock_t lock;
};
struct state_info {
u32 mask;
u32 bit;
u32 x_plate;
u32 y_plate;
u32 pressure;
};
static struct state_info info[] = {
{LRADC_CTRL0_MX23_PLATE_MASK, LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE,
LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM,
LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM,
LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM},
{LRADC_CTRL0_MX28_PLATE_MASK, LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE,
LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW,
LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW,
LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW}
};
static bool mxs_lradc_check_touch_event(struct mxs_lradc_ts *ts)
{
return !!(readl(ts->base + LRADC_STATUS) &
LRADC_STATUS_TOUCH_DETECT_RAW);
}
static void mxs_lradc_map_ts_channel(struct mxs_lradc_ts *ts, unsigned int vch,
unsigned int ch)
{
writel(LRADC_CTRL4_LRADCSELECT_MASK(vch),
ts->base + LRADC_CTRL4 + STMP_OFFSET_REG_CLR);
writel(LRADC_CTRL4_LRADCSELECT(vch, ch),
ts->base + LRADC_CTRL4 + STMP_OFFSET_REG_SET);
}
static void mxs_lradc_setup_ts_channel(struct mxs_lradc_ts *ts, unsigned int ch)
{
/*
* prepare for oversampling conversion
*
* from the datasheet:
* "The ACCUMULATE bit in the appropriate channel register
* HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0;
* otherwise, the IRQs will not fire."
*/
writel(LRADC_CH_ACCUMULATE |
LRADC_CH_NUM_SAMPLES(ts->over_sample_cnt - 1),
ts->base + LRADC_CH(ch));
/* from the datasheet:
* "Software must clear this register in preparation for a
* multi-cycle accumulation.
*/
writel(LRADC_CH_VALUE_MASK,
ts->base + LRADC_CH(ch) + STMP_OFFSET_REG_CLR);
/*
* prepare the delay/loop unit according to the oversampling count
*
* from the datasheet:
* "The DELAY fields in HW_LRADC_DELAY0, HW_LRADC_DELAY1,
* HW_LRADC_DELAY2, and HW_LRADC_DELAY3 must be non-zero; otherwise,
* the LRADC will not trigger the delay group."
*/
writel(LRADC_DELAY_TRIGGER(1 << ch) | LRADC_DELAY_TRIGGER_DELAYS(0) |
LRADC_DELAY_LOOP(ts->over_sample_cnt - 1) |
LRADC_DELAY_DELAY(ts->over_sample_delay - 1),
ts->base + LRADC_DELAY(3));
writel(LRADC_CTRL1_LRADC_IRQ(ch),
ts->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
/*
* after changing the touchscreen plates setting
* the signals need some initial time to settle. Start the
* SoC's delay unit and start the conversion later
* and automatically.
*/
writel(LRADC_DELAY_TRIGGER(0) | LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) |
LRADC_DELAY_KICK | LRADC_DELAY_DELAY(ts->settling_delay),
ts->base + LRADC_DELAY(2));
}
/*
* Pressure detection is special:
* We want to do both required measurements for the pressure detection in
* one turn. Use the hardware features to chain both conversions and let the
* hardware report one interrupt if both conversions are done
*/
static void mxs_lradc_setup_ts_pressure(struct mxs_lradc_ts *ts,
unsigned int ch1, unsigned int ch2)
{
u32 reg;
/*
* prepare for oversampling conversion
*
* from the datasheet:
* "The ACCUMULATE bit in the appropriate channel register
* HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0;
* otherwise, the IRQs will not fire."
*/
reg = LRADC_CH_ACCUMULATE |
LRADC_CH_NUM_SAMPLES(ts->over_sample_cnt - 1);
writel(reg, ts->base + LRADC_CH(ch1));
writel(reg, ts->base + LRADC_CH(ch2));
/* from the datasheet:
* "Software must clear this register in preparation for a
* multi-cycle accumulation.
*/
writel(LRADC_CH_VALUE_MASK,
ts->base + LRADC_CH(ch1) + STMP_OFFSET_REG_CLR);
writel(LRADC_CH_VALUE_MASK,
ts->base + LRADC_CH(ch2) + STMP_OFFSET_REG_CLR);
/* prepare the delay/loop unit according to the oversampling count */
writel(LRADC_DELAY_TRIGGER(1 << ch1) | LRADC_DELAY_TRIGGER(1 << ch2) |
LRADC_DELAY_TRIGGER_DELAYS(0) |
LRADC_DELAY_LOOP(ts->over_sample_cnt - 1) |
LRADC_DELAY_DELAY(ts->over_sample_delay - 1),
ts->base + LRADC_DELAY(3));
writel(LRADC_CTRL1_LRADC_IRQ(ch2),
ts->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
/*
* after changing the touchscreen plates setting
* the signals need some initial time to settle. Start the
* SoC's delay unit and start the conversion later
* and automatically.
*/
writel(LRADC_DELAY_TRIGGER(0) | LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) |
LRADC_DELAY_KICK | LRADC_DELAY_DELAY(ts->settling_delay),
ts->base + LRADC_DELAY(2));
}
static unsigned int mxs_lradc_ts_read_raw_channel(struct mxs_lradc_ts *ts,
unsigned int channel)
{
u32 reg;
unsigned int num_samples, val;
reg = readl(ts->base + LRADC_CH(channel));
if (reg & LRADC_CH_ACCUMULATE)
num_samples = ts->over_sample_cnt;
else
num_samples = 1;
val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET;
return val / num_samples;
}
static unsigned int mxs_lradc_read_ts_pressure(struct mxs_lradc_ts *ts,
unsigned int ch1, unsigned int ch2)
{
u32 reg, mask;
unsigned int pressure, m1, m2;
mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2);
reg = readl(ts->base + LRADC_CTRL1) & mask;
while (reg != mask) {
reg = readl(ts->base + LRADC_CTRL1) & mask;
dev_dbg(ts->dev, "One channel is still busy: %X\n", reg);
}
m1 = mxs_lradc_ts_read_raw_channel(ts, ch1);
m2 = mxs_lradc_ts_read_raw_channel(ts, ch2);
if (m2 == 0) {
dev_warn(ts->dev, "Cannot calculate pressure\n");
return 1 << (LRADC_RESOLUTION - 1);
}
/* simply scale the value from 0 ... max ADC resolution */
pressure = m1;
pressure *= (1 << LRADC_RESOLUTION);
pressure /= m2;
dev_dbg(ts->dev, "Pressure = %u\n", pressure);
return pressure;
}
#define TS_CH_XP 2
#define TS_CH_YP 3
#define TS_CH_XM 4
#define TS_CH_YM 5
/*
* YP(open)--+-------------+
* | |--+
* | | |
* YM(-)--+-------------+ |
* +--------------+
* | |
* XP(weak+) XM(open)
*
* "weak+" means 200k Ohm VDDIO
* (-) means GND
*/
static void mxs_lradc_setup_touch_detection(struct mxs_lradc_ts *ts)
{
struct mxs_lradc *lradc = ts->lradc;
/*
* In order to detect a touch event the 'touch detect enable' bit
* enables:
* - a weak pullup to the X+ connector
* - a strong ground at the Y- connector
*/
writel(info[lradc->soc].mask,
ts->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
writel(info[lradc->soc].bit,
ts->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
}
/*
* YP(meas)--+-------------+
* | |--+
* | | |
* YM(open)--+-------------+ |
* +--------------+
* | |
* XP(+) XM(-)
*
* (+) means here 1.85 V
* (-) means here GND
*/
static void mxs_lradc_prepare_x_pos(struct mxs_lradc_ts *ts)
{
struct mxs_lradc *lradc = ts->lradc;
writel(info[lradc->soc].mask,
ts->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
writel(info[lradc->soc].x_plate,
ts->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
ts->cur_plate = LRADC_SAMPLE_X;
mxs_lradc_map_ts_channel(ts, TOUCHSCREEN_VCHANNEL1, TS_CH_YP);
mxs_lradc_setup_ts_channel(ts, TOUCHSCREEN_VCHANNEL1);
}
/*
* YP(+)--+-------------+
* | |--+
* | | |
* YM(-)--+-------------+ |
* +--------------+
* | |
* XP(open) XM(meas)
*
* (+) means here 1.85 V
* (-) means here GND
*/
static void mxs_lradc_prepare_y_pos(struct mxs_lradc_ts *ts)
{
struct mxs_lradc *lradc = ts->lradc;
writel(info[lradc->soc].mask,
ts->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
writel(info[lradc->soc].y_plate,
ts->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
ts->cur_plate = LRADC_SAMPLE_Y;
mxs_lradc_map_ts_channel(ts, TOUCHSCREEN_VCHANNEL1, TS_CH_XM);
mxs_lradc_setup_ts_channel(ts, TOUCHSCREEN_VCHANNEL1);
}
/*
* YP(+)--+-------------+
* | |--+
* | | |
* YM(meas)--+-------------+ |
* +--------------+
* | |
* XP(meas) XM(-)
*
* (+) means here 1.85 V
* (-) means here GND
*/
static void mxs_lradc_prepare_pressure(struct mxs_lradc_ts *ts)
{
struct mxs_lradc *lradc = ts->lradc;
writel(info[lradc->soc].mask,
ts->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
writel(info[lradc->soc].pressure,
ts->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
ts->cur_plate = LRADC_SAMPLE_PRESSURE;
mxs_lradc_map_ts_channel(ts, TOUCHSCREEN_VCHANNEL1, TS_CH_YM);
mxs_lradc_map_ts_channel(ts, TOUCHSCREEN_VCHANNEL2, TS_CH_XP);
mxs_lradc_setup_ts_pressure(ts, TOUCHSCREEN_VCHANNEL2,
TOUCHSCREEN_VCHANNEL1);
}
static void mxs_lradc_enable_touch_detection(struct mxs_lradc_ts *ts)
{
mxs_lradc_setup_touch_detection(ts);
ts->cur_plate = LRADC_TOUCH;
writel(LRADC_CTRL1_TOUCH_DETECT_IRQ | LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
ts->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
writel(LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
ts->base + LRADC_CTRL1 + STMP_OFFSET_REG_SET);
}
static void mxs_lradc_start_touch_event(struct mxs_lradc_ts *ts)
{
writel(LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
ts->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
writel(LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1),
ts->base + LRADC_CTRL1 + STMP_OFFSET_REG_SET);
/*
* start with the Y-pos, because it uses nearly the same plate
* settings like the touch detection
*/
mxs_lradc_prepare_y_pos(ts);
}
static void mxs_lradc_report_ts_event(struct mxs_lradc_ts *ts)
{
input_report_abs(ts->ts_input, ABS_X, ts->ts_x_pos);
input_report_abs(ts->ts_input, ABS_Y, ts->ts_y_pos);
input_report_abs(ts->ts_input, ABS_PRESSURE, ts->ts_pressure);
input_report_key(ts->ts_input, BTN_TOUCH, 1);
input_sync(ts->ts_input);
}
static void mxs_lradc_complete_touch_event(struct mxs_lradc_ts *ts)
{
mxs_lradc_setup_touch_detection(ts);
ts->cur_plate = LRADC_SAMPLE_VALID;
/*
* start a dummy conversion to burn time to settle the signals
* note: we are not interested in the conversion's value
*/
writel(0, ts->base + LRADC_CH(TOUCHSCREEN_VCHANNEL1));
writel(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2),
ts->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
writel(LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) |
LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10),
ts->base + LRADC_DELAY(2));
}
/*
* in order to avoid false measurements, report only samples where
* the surface is still touched after the position measurement
*/
static void mxs_lradc_finish_touch_event(struct mxs_lradc_ts *ts, bool valid)
{
/* if it is still touched, report the sample */
if (valid && mxs_lradc_check_touch_event(ts)) {
ts->ts_valid = true;
mxs_lradc_report_ts_event(ts);
}
/* if it is even still touched, continue with the next measurement */
if (mxs_lradc_check_touch_event(ts)) {
mxs_lradc_prepare_y_pos(ts);
return;
}
if (ts->ts_valid) {
/* signal the release */
ts->ts_valid = false;
input_report_key(ts->ts_input, BTN_TOUCH, 0);
input_sync(ts->ts_input);
}
/* if it is released, wait for the next touch via IRQ */
ts->cur_plate = LRADC_TOUCH;
writel(0, ts->base + LRADC_DELAY(2));
writel(0, ts->base + LRADC_DELAY(3));
writel(LRADC_CTRL1_TOUCH_DETECT_IRQ |
LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1),
ts->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
writel(LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
ts->base + LRADC_CTRL1 + STMP_OFFSET_REG_SET);
}
/* touchscreen's state machine */
static void mxs_lradc_handle_touch(struct mxs_lradc_ts *ts)
{
switch (ts->cur_plate) {
case LRADC_TOUCH:
if (mxs_lradc_check_touch_event(ts))
mxs_lradc_start_touch_event(ts);
writel(LRADC_CTRL1_TOUCH_DETECT_IRQ,
ts->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
return;
case LRADC_SAMPLE_Y:
ts->ts_y_pos =
mxs_lradc_ts_read_raw_channel(ts, TOUCHSCREEN_VCHANNEL1);
mxs_lradc_prepare_x_pos(ts);
return;
case LRADC_SAMPLE_X:
ts->ts_x_pos =
mxs_lradc_ts_read_raw_channel(ts, TOUCHSCREEN_VCHANNEL1);
mxs_lradc_prepare_pressure(ts);
return;
case LRADC_SAMPLE_PRESSURE:
ts->ts_pressure =
mxs_lradc_read_ts_pressure(ts,
TOUCHSCREEN_VCHANNEL2,
TOUCHSCREEN_VCHANNEL1);
mxs_lradc_complete_touch_event(ts);
return;
case LRADC_SAMPLE_VALID:
mxs_lradc_finish_touch_event(ts, 1);
break;
}
}
/* IRQ Handling */
static irqreturn_t mxs_lradc_ts_handle_irq(int irq, void *data)
{
struct mxs_lradc_ts *ts = data;
struct mxs_lradc *lradc = ts->lradc;
unsigned long reg = readl(ts->base + LRADC_CTRL1);
u32 clr_irq = mxs_lradc_irq_mask(lradc);
const u32 ts_irq_mask =
LRADC_CTRL1_TOUCH_DETECT_IRQ |
LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2);
unsigned long flags;
if (!(reg & mxs_lradc_irq_mask(lradc)))
return IRQ_NONE;
if (reg & ts_irq_mask) {
spin_lock_irqsave(&ts->lock, flags);
mxs_lradc_handle_touch(ts);
spin_unlock_irqrestore(&ts->lock, flags);
/* Make sure we don't clear the next conversion's interrupt. */
clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2));
writel(reg & clr_irq,
ts->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
}
return IRQ_HANDLED;
}
static int mxs_lradc_ts_open(struct input_dev *dev)
{
struct mxs_lradc_ts *ts = input_get_drvdata(dev);
/* Enable the touch-detect circuitry. */
mxs_lradc_enable_touch_detection(ts);
return 0;
}
static void mxs_lradc_ts_stop(struct mxs_lradc_ts *ts)
{
int i;
struct mxs_lradc *lradc = ts->lradc;
/* stop all interrupts from firing */
writel(LRADC_CTRL1_TOUCH_DETECT_IRQ_EN |
LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2),
ts->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
/* Power-down touchscreen touch-detect circuitry. */
writel(info[lradc->soc].mask,
ts->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
writel(lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,
ts->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
for (i = 1; i < LRADC_MAX_DELAY_CHANS; i++)
writel(0, ts->base + LRADC_DELAY(i));
}
static void mxs_lradc_ts_close(struct input_dev *dev)
{
struct mxs_lradc_ts *ts = input_get_drvdata(dev);
mxs_lradc_ts_stop(ts);
}
static void mxs_lradc_ts_hw_init(struct mxs_lradc_ts *ts)
{
struct mxs_lradc *lradc = ts->lradc;
/* Configure the touchscreen type */
if (lradc->soc == IMX28_LRADC) {
writel(LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
ts->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
if (lradc->touchscreen_wire == MXS_LRADC_TOUCHSCREEN_5WIRE)
writel(LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
ts->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
}
}
static int mxs_lradc_ts_register(struct mxs_lradc_ts *ts)
{
struct input_dev *input = ts->ts_input;
struct device *dev = ts->dev;
input = devm_input_allocate_device(dev);
if (!input)
return -ENOMEM;
input->name = "mxs-lradc-ts";
input->id.bustype = BUS_HOST;
input->open = mxs_lradc_ts_open;
input->close = mxs_lradc_ts_close;
__set_bit(INPUT_PROP_DIRECT, input->propbit);
input_set_capability(input, EV_KEY, BTN_TOUCH);
input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK,
0, 0);
ts->ts_input = input;
input_set_drvdata(input, ts);
return input_register_device(input);
}
static int mxs_lradc_ts_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = dev->parent->of_node;
struct mxs_lradc *lradc = dev_get_drvdata(dev->parent);
struct mxs_lradc_ts *ts;
struct resource *iores;
int ret, irq, virq, i;
u32 ts_wires = 0, adapt;
ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
if (!ts)
return -ENOMEM;
platform_set_drvdata(pdev, ts);
ts->lradc = lradc;
ts->dev = dev;
spin_lock_init(&ts->lock);
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ts->base = devm_ioremap(dev, iores->start, resource_size(iores));
if (IS_ERR(ts->base))
return PTR_ERR(ts->base);
ret = of_property_read_u32(node, "fsl,lradc-touchscreen-wires",
&ts_wires);
if (ret)
return ret;
if (of_property_read_u32(node, "fsl,ave-ctrl", &adapt)) {
ts->over_sample_cnt = 4;
} else {
if (adapt >= 1 && adapt <= 32) {
ts->over_sample_cnt = adapt;
} else {
dev_err(ts->dev, "Invalid sample count (%u)\n",
adapt);
return -EINVAL;
}
}
if (of_property_read_u32(node, "fsl,ave-delay", &adapt)) {
ts->over_sample_delay = 2;
} else {
if (adapt >= 2 && adapt <= LRADC_DELAY_DELAY_MASK + 1) {
ts->over_sample_delay = adapt;
} else {
dev_err(ts->dev, "Invalid sample delay (%u)\n",
adapt);
return -EINVAL;
}
}
if (of_property_read_u32(node, "fsl,settling", &adapt)) {
ts->settling_delay = 10;
} else {
if (adapt >= 1 && adapt <= LRADC_DELAY_DELAY_MASK) {
ts->settling_delay = adapt;
} else {
dev_err(ts->dev, "Invalid settling delay (%u)\n",
adapt);
return -EINVAL;
}
}
ret = stmp_reset_block(ts->base);
if (ret)
return ret;
mxs_lradc_ts_hw_init(ts);
for (i = 0; i < 3; i++) {
irq = platform_get_irq_byname(pdev, mxs_lradc_ts_irq_names[i]);
if (irq < 0)
return irq;
virq = irq_of_parse_and_map(node, irq);
mxs_lradc_ts_stop(ts);
ret = devm_request_irq(dev, virq,
mxs_lradc_ts_handle_irq,
0, mxs_lradc_ts_irq_names[i], ts);
if (ret)
return ret;
}
return mxs_lradc_ts_register(ts);
}
static struct platform_driver mxs_lradc_ts_driver = {
.driver = {
.name = "mxs-lradc-ts",
},
.probe = mxs_lradc_ts_probe,
};
module_platform_driver(mxs_lradc_ts_driver);
MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
MODULE_DESCRIPTION("Freescale MXS LRADC touchscreen driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:mxs-lradc-ts");