diff --git a/inc/wlan_policy_mgr_api.h b/inc/wlan_policy_mgr_api.h
index 28024645b332..59b645a28428 100644
--- a/inc/wlan_policy_mgr_api.h
+++ b/inc/wlan_policy_mgr_api.h
@@ -136,14 +136,14 @@ QDF_STATUS policy_mgr_get_conc_rule2(struct wlan_objmgr_psoc *psoc,
 /**
  * policy_mgr_get_dbs_selection_plcy() - DBS HW mode selection setting
  * @psoc: pointer to psoc
- * @dbs_selection_policy: value to be filled
+ * @dbs_selection_plcy: value to be filled
  *
  * This API is used to find out DBS HW mode preference.
  *
  * Return: QDF_STATUS_SUCCESS up on success and any other status for failure.
  */
 QDF_STATUS policy_mgr_get_dbs_selection_plcy(struct wlan_objmgr_psoc *psoc,
-						uint32_t *dbs_selection_policy);
+						uint32_t *dbs_selection_plcy);
 /**
  * policy_mgr_get_vdev_priority_list() - to get vdev priority list
  * @psoc: pointer to psoc
diff --git a/inc/wlan_policy_mgr_public_struct.h b/inc/wlan_policy_mgr_public_struct.h
index a52029f0f7a7..89cb5c6ce7bd 100644
--- a/inc/wlan_policy_mgr_public_struct.h
+++ b/inc/wlan_policy_mgr_public_struct.h
@@ -1055,27 +1055,13 @@ enum policy_mgr_pri_id {
  * @enable_mcc_adaptive_scheduler: Enable MCC adaptive scheduler
  * @enable2x2: 2x2 chain mask user config
  * @sub_20_mhz_enabled: Is 5 or 10 Mhz enabled
- * @dbs_selection_policy: band preference or Vdev preference
- *      bit[0] = 0: 5G 2x2 preferred to select 2x2 5G + 1x1 2G DBS mode.
- *      bit[0] = 1: 2G 2x2 preferred to select 2x2 2G + 1x1 5G DBS mode.
- *      bit[1] = 1: vdev priority enabled.
- *      bit[1] = 0: vdev priority disabled.
- * @vdev_priority_list: vdev priority list
- *      bit[0-3]: pri_id (policy_mgr_pri_id) of highest priority
- *      bit[4-7]: pri_id (policy_mgr_pri_id) of second priority
- *      bit[8-11]: pri_id (policy_mgr_pri_id) of third priority
- *      bit[12-15]: pri_id (policy_mgr_pri_id) of fourth priority
- *      example: 0x4321 - CLI < GO < SAP < STA
  */
 struct policy_mgr_user_cfg {
 	uint8_t enable_mcc_adaptive_scheduler;
 	bool enable2x2;
 	bool sub_20_mhz_enabled;
 	bool is_sta_sap_scc_allowed_on_dfs_chan;
-	uint32_t channel_select_logic_conc;
 	uint32_t sta_sap_scc_on_lte_coex_chan;
-	uint32_t dbs_selection_policy;
-	uint32_t vdev_priority_list;
 };
 
 /**
diff --git a/inc/wlan_policy_mgr_ucfg.h b/inc/wlan_policy_mgr_ucfg.h
index ab6e51c192d3..33e246cfa3fa 100644
--- a/inc/wlan_policy_mgr_ucfg.h
+++ b/inc/wlan_policy_mgr_ucfg.h
@@ -121,14 +121,14 @@ QDF_STATUS ucfg_policy_mgr_get_conc_rule2(struct wlan_objmgr_psoc *psoc,
 /**
  * ucfg_policy_mgr_get_dbs_selection_plcy() - DBS HW mode selection setting
  * @psoc: pointer to psoc
- * @dbs_selection_policy: value to be filled
+ * @dbs_selection_plcy: value to be filled
  *
  * This API is used to find out DBS HW mode preference.
  *
  * Return: QDF_STATUS_SUCCESS up on success and any other status for failure.
  */
 QDF_STATUS ucfg_policy_mgr_get_dbs_selection_plcy(struct wlan_objmgr_psoc *psoc,
-						uint32_t *dbs_selection_policy);
+						uint32_t *dbs_selection_plcy);
 /**
  * ucfg_policy_mgr_get_vdev_priority_list() - to get vdev priority list
  * @psoc: pointer to psoc
diff --git a/src/wlan_policy_mgr_action.c b/src/wlan_policy_mgr_action.c
index ac2ddf75df79..a7514fbd9a8b 100644
--- a/src/wlan_policy_mgr_action.c
+++ b/src/wlan_policy_mgr_action.c
@@ -392,6 +392,7 @@ bool policy_mgr_is_dbs_allowed_for_concurrency(
 	struct policy_mgr_psoc_priv_obj *pm_ctx;
 	uint32_t count, dbs_for_sta_sta, dbs_for_sta_p2p;
 	bool ret = true;
+	uint32_t ch_sel_plcy;
 
 	pm_ctx = policy_mgr_get_context(psoc);
 	if (!pm_ctx) {
@@ -404,10 +405,9 @@ bool policy_mgr_is_dbs_allowed_for_concurrency(
 	if (count != 1 || new_conn_mode == QDF_MAX_NO_OF_MODE)
 		return ret;
 
-	dbs_for_sta_sta = PM_CHANNEL_SELECT_LOGIC_STA_STA_GET(pm_ctx->user_cfg.
-						channel_select_logic_conc);
-	dbs_for_sta_p2p = PM_CHANNEL_SELECT_LOGIC_STA_P2P_GET(pm_ctx->user_cfg.
-						channel_select_logic_conc);
+	ch_sel_plcy = pm_ctx->cfg.chnl_select_plcy;
+	dbs_for_sta_sta = PM_CHANNEL_SELECT_LOGIC_STA_STA_GET(ch_sel_plcy);
+	dbs_for_sta_p2p = PM_CHANNEL_SELECT_LOGIC_STA_P2P_GET(ch_sel_plcy);
 
 	switch (pm_conc_connection_list[0].mode) {
 	case PM_STA_MODE:
@@ -592,12 +592,12 @@ policy_mgr_get_preferred_dbs_action_table(
 		policy_mgr_debug("target only supports DBS1!");
 		goto DONE;
 	}
-	if (PM_GET_BAND_PREFERRED(pm_ctx->user_cfg.dbs_selection_policy) == 1)
+	if (PM_GET_BAND_PREFERRED(pm_ctx->cfg.dbs_selection_plcy) == 1)
 		band_pref_5g = false;
 
 	if (PM_GET_VDEV_PRIORITY_ENABLED(
-	    pm_ctx->user_cfg.dbs_selection_policy) == 1 &&
-	    pm_ctx->user_cfg.vdev_priority_list)
+	    pm_ctx->cfg.dbs_selection_plcy) == 1 &&
+	    pm_ctx->cfg.vdev_priority_list)
 		vdev_priority_enabled = true;
 
 	if (!vdev_priority_enabled)
@@ -619,7 +619,7 @@ policy_mgr_get_preferred_dbs_action_table(
 					 vdev_id, new_conn_op_mode, channel,
 					 reason);
 	}
-	vdev_pri_list = pm_ctx->user_cfg.vdev_priority_list;
+	vdev_pri_list = pm_ctx->cfg.vdev_priority_list;
 	while (vdev_pri_list) {
 		vdev_pri_id = vdev_pri_list & 0xF;
 		pri_conn_mode = policy_mgr_pri_id_to_con_mode(vdev_pri_id);
diff --git a/src/wlan_policy_mgr_get_set_utils.c b/src/wlan_policy_mgr_get_set_utils.c
index 582db6828544..3aeddd794bac 100644
--- a/src/wlan_policy_mgr_get_set_utils.c
+++ b/src/wlan_policy_mgr_get_set_utils.c
@@ -2112,10 +2112,10 @@ QDF_STATUS policy_mgr_set_user_cfg(struct wlan_objmgr_psoc *psoc,
 	}
 
 	pm_ctx->user_cfg = *user_cfg;
-	policy_mgr_debug("dbs_selection_policy 0x%x",
-			 user_cfg->dbs_selection_policy);
+	policy_mgr_debug("dbs_selection_plcy 0x%x",
+			 pm_ctx->cfg.dbs_selection_plcy);
 	policy_mgr_debug("vdev_priority_list 0x%x",
-			 user_cfg->vdev_priority_list);
+			 pm_ctx->cfg.vdev_priority_list);
 	pm_ctx->cur_conc_system_pref = pm_ctx->cfg.sys_pref;
 
 	return QDF_STATUS_SUCCESS;