mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-31 04:01:48 -04:00
mfd: Add TI LMU driver
TI LMU (Lighting Management Unit) driver supports lighting devices below. LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697. LMU devices have common features. - I2C interface for accessing device registers - Hardware enable pin control - Backlight brightness control - Notifier for hardware fault monitoring - Regulators for LCD display bias It contains fault monitor, backlight, LED and regulator driver. LMU fault monitor ----------------- LM3633 and LM3697 provide hardware monitoring feature. It enables open or short circuit detection. After monitoring is done, each device should be re-initialized. Notifier is used for this case. Separate patch for 'ti-lmu-fault-monitor' will be sent later. Backlight --------- It's handled by TI LMU backlight consolidated driver and chip dependent data. Separate patchset will be sent later. LED indicator ------------- LM3633 has 6 indicator LEDs. Programmable dimming pattern is also supported. Separate patch for 'leds-lm3633' will be sent later. Regulator --------- LM3631 has 5 regulators for the display bias. LM3632 supports 3 regulators. One consolidated driver enables it. The lm363x regulator driver is already upstreamed. Signed-off-by: Milo Kim <[email protected]> Tested-by: Tony Lindgren <[email protected]> Signed-off-by: Lee Jones <[email protected]>
This commit is contained in:
Milo Kim
Lee Jones
parent
287cce719d
commit
d5aa11bfe9
5 changed files with 640 additions and 0 deletions
|
|
@ -1181,6 +1181,18 @@ config MFD_LP8788
|
|||
TI LP8788 PMU supports regulators, battery charger, RTC,
|
||||
ADC, backlight driver and current sinks.
|
||||
|
||||
config MFD_TI_LMU
|
||||
tristate "TI Lighting Management Unit driver"
|
||||
depends on I2C
|
||||
select MFD_CORE
|
||||
select REGMAP_I2C
|
||||
help
|
||||
Say yes here to enable support for TI LMU chips.
|
||||
|
||||
TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697.
|
||||
It consists of backlight, LED and regulator driver.
|
||||
It provides consistent device controls for lighting functions.
|
||||
|
||||
config MFD_OMAP_USB_HOST
|
||||
bool "TI OMAP USBHS core and TLL driver"
|
||||
depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
|
||||
|
|
|
|||
|
|
@ -127,6 +127,8 @@ obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o
|
|||
obj-$(CONFIG_MFD_LP3943) += lp3943.o
|
||||
obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
|
||||
|
||||
obj-$(CONFIG_MFD_TI_LMU) += ti-lmu.o
|
||||
|
||||
da9055-objs := da9055-core.o da9055-i2c.o
|
||||
obj-$(CONFIG_MFD_DA9055) += da9055.o
|
||||
obj-$(CONFIG_MFD_DA9062) += da9062-core.o
|
||||
|
|
|
|||
259
drivers/mfd/ti-lmu.c
Normal file
259
drivers/mfd/ti-lmu.c
Normal file
|
|
@ -0,0 +1,259 @@
|
|||
/*
|
||||
* TI LMU (Lighting Management Unit) Core Driver
|
||||
*
|
||||
* Copyright 2017 Texas Instruments
|
||||
*
|
||||
* Author: Milo Kim <milo.kim@ti.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/mfd/core.h>
|
||||
#include <linux/mfd/ti-lmu.h>
|
||||
#include <linux/mfd/ti-lmu-register.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
struct ti_lmu_data {
|
||||
struct mfd_cell *cells;
|
||||
int num_cells;
|
||||
unsigned int max_register;
|
||||
};
|
||||
|
||||
static int ti_lmu_enable_hw(struct ti_lmu *lmu, enum ti_lmu_id id)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (gpio_is_valid(lmu->en_gpio)) {
|
||||
ret = devm_gpio_request_one(lmu->dev, lmu->en_gpio,
|
||||
GPIOF_OUT_INIT_HIGH, "lmu_hwen");
|
||||
if (ret) {
|
||||
dev_err(lmu->dev, "Can not request enable GPIO: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
/* Delay about 1ms after HW enable pin control */
|
||||
usleep_range(1000, 1500);
|
||||
|
||||
/* LM3631 has additional power up sequence - enable LCD_EN bit. */
|
||||
if (id == LM3631) {
|
||||
return regmap_update_bits(lmu->regmap, LM3631_REG_DEVCTRL,
|
||||
LM3631_LCD_EN_MASK,
|
||||
LM3631_LCD_EN_MASK);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void ti_lmu_disable_hw(struct ti_lmu *lmu)
|
||||
{
|
||||
if (gpio_is_valid(lmu->en_gpio))
|
||||
gpio_set_value(lmu->en_gpio, 0);
|
||||
}
|
||||
|
||||
static struct mfd_cell lm3532_devices[] = {
|
||||
{
|
||||
.name = "ti-lmu-backlight",
|
||||
.id = LM3532,
|
||||
.of_compatible = "ti,lm3532-backlight",
|
||||
},
|
||||
};
|
||||
|
||||
#define LM363X_REGULATOR(_id) \
|
||||
{ \
|
||||
.name = "lm363x-regulator", \
|
||||
.id = _id, \
|
||||
.of_compatible = "ti,lm363x-regulator", \
|
||||
} \
|
||||
|
||||
static struct mfd_cell lm3631_devices[] = {
|
||||
LM363X_REGULATOR(LM3631_BOOST),
|
||||
LM363X_REGULATOR(LM3631_LDO_CONT),
|
||||
LM363X_REGULATOR(LM3631_LDO_OREF),
|
||||
LM363X_REGULATOR(LM3631_LDO_POS),
|
||||
LM363X_REGULATOR(LM3631_LDO_NEG),
|
||||
{
|
||||
.name = "ti-lmu-backlight",
|
||||
.id = LM3631,
|
||||
.of_compatible = "ti,lm3631-backlight",
|
||||
},
|
||||
};
|
||||
|
||||
static struct mfd_cell lm3632_devices[] = {
|
||||
LM363X_REGULATOR(LM3632_BOOST),
|
||||
LM363X_REGULATOR(LM3632_LDO_POS),
|
||||
LM363X_REGULATOR(LM3632_LDO_NEG),
|
||||
{
|
||||
.name = "ti-lmu-backlight",
|
||||
.id = LM3632,
|
||||
.of_compatible = "ti,lm3632-backlight",
|
||||
},
|
||||
};
|
||||
|
||||
static struct mfd_cell lm3633_devices[] = {
|
||||
{
|
||||
.name = "ti-lmu-backlight",
|
||||
.id = LM3633,
|
||||
.of_compatible = "ti,lm3633-backlight",
|
||||
},
|
||||
{
|
||||
.name = "lm3633-leds",
|
||||
.of_compatible = "ti,lm3633-leds",
|
||||
},
|
||||
/* Monitoring driver for open/short circuit detection */
|
||||
{
|
||||
.name = "ti-lmu-fault-monitor",
|
||||
.id = LM3633,
|
||||
.of_compatible = "ti,lm3633-fault-monitor",
|
||||
},
|
||||
};
|
||||
|
||||
static struct mfd_cell lm3695_devices[] = {
|
||||
{
|
||||
.name = "ti-lmu-backlight",
|
||||
.id = LM3695,
|
||||
.of_compatible = "ti,lm3695-backlight",
|
||||
},
|
||||
};
|
||||
|
||||
static struct mfd_cell lm3697_devices[] = {
|
||||
{
|
||||
.name = "ti-lmu-backlight",
|
||||
.id = LM3697,
|
||||
.of_compatible = "ti,lm3697-backlight",
|
||||
},
|
||||
/* Monitoring driver for open/short circuit detection */
|
||||
{
|
||||
.name = "ti-lmu-fault-monitor",
|
||||
.id = LM3697,
|
||||
.of_compatible = "ti,lm3697-fault-monitor",
|
||||
},
|
||||
};
|
||||
|
||||
#define TI_LMU_DATA(chip, max_reg) \
|
||||
static const struct ti_lmu_data chip##_data = \
|
||||
{ \
|
||||
.cells = chip##_devices, \
|
||||
.num_cells = ARRAY_SIZE(chip##_devices),\
|
||||
.max_register = max_reg, \
|
||||
} \
|
||||
|
||||
TI_LMU_DATA(lm3532, LM3532_MAX_REG);
|
||||
TI_LMU_DATA(lm3631, LM3631_MAX_REG);
|
||||
TI_LMU_DATA(lm3632, LM3632_MAX_REG);
|
||||
TI_LMU_DATA(lm3633, LM3633_MAX_REG);
|
||||
TI_LMU_DATA(lm3695, LM3695_MAX_REG);
|
||||
TI_LMU_DATA(lm3697, LM3697_MAX_REG);
|
||||
|
||||
static const struct of_device_id ti_lmu_of_match[] = {
|
||||
{ .compatible = "ti,lm3532", .data = &lm3532_data },
|
||||
{ .compatible = "ti,lm3631", .data = &lm3631_data },
|
||||
{ .compatible = "ti,lm3632", .data = &lm3632_data },
|
||||
{ .compatible = "ti,lm3633", .data = &lm3633_data },
|
||||
{ .compatible = "ti,lm3695", .data = &lm3695_data },
|
||||
{ .compatible = "ti,lm3697", .data = &lm3697_data },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ti_lmu_of_match);
|
||||
|
||||
static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)
|
||||
{
|
||||
struct device *dev = &cl->dev;
|
||||
const struct of_device_id *match;
|
||||
const struct ti_lmu_data *data;
|
||||
struct regmap_config regmap_cfg;
|
||||
struct ti_lmu *lmu;
|
||||
int ret;
|
||||
|
||||
match = of_match_device(ti_lmu_of_match, dev);
|
||||
if (!match)
|
||||
return -ENODEV;
|
||||
/*
|
||||
* Get device specific data from of_match table.
|
||||
* This data is defined by using TI_LMU_DATA() macro.
|
||||
*/
|
||||
data = (struct ti_lmu_data *)match->data;
|
||||
|
||||
lmu = devm_kzalloc(dev, sizeof(*lmu), GFP_KERNEL);
|
||||
if (!lmu)
|
||||
return -ENOMEM;
|
||||
|
||||
lmu->dev = &cl->dev;
|
||||
|
||||
/* Setup regmap */
|
||||
memset(®map_cfg, 0, sizeof(struct regmap_config));
|
||||
regmap_cfg.reg_bits = 8;
|
||||
regmap_cfg.val_bits = 8;
|
||||
regmap_cfg.name = id->name;
|
||||
regmap_cfg.max_register = data->max_register;
|
||||
|
||||
lmu->regmap = devm_regmap_init_i2c(cl, ®map_cfg);
|
||||
if (IS_ERR(lmu->regmap))
|
||||
return PTR_ERR(lmu->regmap);
|
||||
|
||||
/* HW enable pin control and additional power up sequence if required */
|
||||
lmu->en_gpio = of_get_named_gpio(dev->of_node, "enable-gpios", 0);
|
||||
ret = ti_lmu_enable_hw(lmu, id->driver_data);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* Fault circuit(open/short) can be detected by ti-lmu-fault-monitor.
|
||||
* After fault detection is done, some devices should re-initialize
|
||||
* configuration. The notifier enables such kind of handling.
|
||||
*/
|
||||
BLOCKING_INIT_NOTIFIER_HEAD(&lmu->notifier);
|
||||
|
||||
i2c_set_clientdata(cl, lmu);
|
||||
|
||||
return mfd_add_devices(lmu->dev, 0, data->cells,
|
||||
data->num_cells, NULL, 0, NULL);
|
||||
}
|
||||
|
||||
static int ti_lmu_remove(struct i2c_client *cl)
|
||||
{
|
||||
struct ti_lmu *lmu = i2c_get_clientdata(cl);
|
||||
|
||||
ti_lmu_disable_hw(lmu);
|
||||
mfd_remove_devices(lmu->dev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id ti_lmu_ids[] = {
|
||||
{ "lm3532", LM3532 },
|
||||
{ "lm3631", LM3631 },
|
||||
{ "lm3632", LM3632 },
|
||||
{ "lm3633", LM3633 },
|
||||
{ "lm3695", LM3695 },
|
||||
{ "lm3697", LM3697 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, ti_lmu_ids);
|
||||
|
||||
static struct i2c_driver ti_lmu_driver = {
|
||||
.probe = ti_lmu_probe,
|
||||
.remove = ti_lmu_remove,
|
||||
.driver = {
|
||||
.name = "ti-lmu",
|
||||
.of_match_table = ti_lmu_of_match,
|
||||
},
|
||||
.id_table = ti_lmu_ids,
|
||||
};
|
||||
|
||||
module_i2c_driver(ti_lmu_driver);
|
||||
|
||||
MODULE_DESCRIPTION("TI LMU MFD Core Driver");
|
||||
MODULE_AUTHOR("Milo Kim");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in a new issue