Merge "ARM: dts: msm: Enable ESD for 144 fps panel on shima target"

This commit is contained in:
qctecmdr 2020-09-28 01:11:46 -07:00 • committed by Gerrit - the friendly Code Review server
commit d5dcd62332
3 changed files with 33 additions and 0 deletions

View file

@ -2,6 +2,7 @@
#include "dsi-panel-r66451-dsc-fhd-plus-60hz-video.dtsi"
#include "dsi-panel-r66451-dsc-fhd-plus-cmd.dtsi"
#include "dsi-panel-r66451-dsc-fhd-plus-60hz-cmd.dtsi"
#include "dsi-panel-r66451-dsc-fhd-plus-144hz-cmd.dtsi"
#include "dsi-panel-sim-video.dtsi"
#include <dt-bindings/clock/mdss-5nm-pll-clk.h>
@ -121,6 +122,18 @@
};
};
&dsi_r66451_amoled_144hz_cmd {
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
qcom,mdss-dsi-display-timings {
timing@0 {
qcom,mdss-dsi-panel-phy-timings = [00 22 09 09 19 17 09
09 09 02 04 00 1d 0e];
qcom,display-topology = <2 2 1>;
qcom,default-topology-index = <0>;
};
};
};
&dsi_r66451_amoled_cmd {
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
qcom,dsi-select-sec-clocks = "mux_byte_clk1", "mux_pixel_clk1";

View file

@ -42,6 +42,17 @@
qcom,platform-reset-gpio = <&tlmm 24 0>;
};
&dsi_r66451_amoled_144hz_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,mdss-brightness-max-level = <255>;
qcom,mdss-dsi-bl-inverted-dbv;
qcom,platform-te-gpio = <&tlmm 82 0>;
qcom,platform-reset-gpio = <&tlmm 24 0>;
};
&dsi_sim_vid {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

View file

@ -113,3 +113,12 @@
qcom,mdss-dsi-panel-status-value = <0x1c>;
qcom,mdss-dsi-panel-status-read-length = <1>;
};
&dsi_r66451_amoled_144hz_cmd {
qcom,esd-check-enabled;
qcom,mdss-dsi-panel-status-check-mode = "reg_read";
qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode";
qcom,mdss-dsi-panel-status-value = <0x1c>;
qcom,mdss-dsi-panel-status-read-length = <1>;
};