From 3d93865409811e15267d881db57ef7b7cb4d22b1 Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Thu, 22 Apr 2021 20:17:11 -0700 Subject: [PATCH 1/3] ARM: dts: msm: Include sdxlemur-mtp dt in sdxlemur-atp Assuming that ATP is similar to MTP in this aspect. Change-Id: I2519dcba24ec60c549a27aea4641a95ecdd2569b --- qcom/sdxlemur-atp.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/qcom/sdxlemur-atp.dtsi b/qcom/sdxlemur-atp.dtsi index cc3a833f430e..e39236090d51 100644 --- a/qcom/sdxlemur-atp.dtsi +++ b/qcom/sdxlemur-atp.dtsi @@ -1,3 +1,4 @@ +#include "sdxlemur-mtp.dtsi" &soc { From 2d0652d8b6a059fcc3cc537720e0e5cfffbc72e2 Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Fri, 16 Apr 2021 18:43:48 -0700 Subject: [PATCH 2/3] ARM: dts: msm: Add PM7250B to sdxlemur-atp Add support for PM7250B on the ATP board. Change-Id: I5b5551eced2ffa28766b7b560d3d80136be35c52 --- qcom/sdxlemur-atp.dtsi | 228 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 227 insertions(+), 1 deletion(-) diff --git a/qcom/sdxlemur-atp.dtsi b/qcom/sdxlemur-atp.dtsi index e39236090d51..71d059cff54d 100644 --- a/qcom/sdxlemur-atp.dtsi +++ b/qcom/sdxlemur-atp.dtsi @@ -1,6 +1,232 @@ #include "sdxlemur-mtp.dtsi" +#include "pm7250b.dtsi" +#include &soc { - + atp_batterydata: qcom,battery-data { + qcom,batt-id-range-pct = <15>; + #include "qg-batterydata-alium-3600mah.dtsi" + }; }; +&pm7250b_clkdiv { + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; +}; + +&pm7250b_vadc { + charger_skin_therm { + reg = ; + label = "charger_skin_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + conn_therm { + reg = ; + label = "conn_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + smb1390_therm@e { + qcom,scale-fn-type = ; + }; +}; + +&pm7250b_charger { + #io-channel-cells = <1>; + io-channels = <&pm7250b_vadc ADC5_USB_IN_V_16>, + <&pm7250b_vadc ADC5_USB_IN_I>, + <&pm7250b_vadc ADC5_CHG_TEMP>, + <&pm7250b_vadc ADC5_DIE_TEMP>, + <&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>, + <&pm7250b_vadc ADC5_SBUx>, + <&pm7250b_vadc ADC5_VPH_PWR>, + <&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>, + <&pm7250b_qg PSY_IIO_RESISTANCE_ID>, + <&pm7250b_qg PSY_IIO_VOLTAGE_NOW>, + <&pm7250b_qg PSY_IIO_TEMP>, + <&pm7250b_qg PSY_IIO_CAPACITY>, + <&pm7250b_qg PSY_IIO_VOLTAGE_OCV>, + <&pm7250b_qg PSY_IIO_VOLTAGE_AVG>, + <&pm7250b_qg PSY_IIO_DEBUG_BATTERY>, + <&pm7250b_qg PSY_IIO_REAL_CAPACITY>, + <&pm7250b_qg PSY_IIO_CC_SOC>, + <&pm7250b_qg PSY_IIO_CURRENT_NOW>, + <&pm7250b_qg PSY_IIO_VOLTAGE_MAX>, + <&pm7250b_qg PSY_IIO_CHARGE_FULL>, + <&pm7250b_qg PSY_IIO_CHARGE_COUNTER>, + <&pm7250b_qg PSY_IIO_CYCLE_COUNT>, + <&pm7250b_qg PSY_IIO_CHARGE_FULL_DESIGN>, + <&pm7250b_qg PSY_IIO_TIME_TO_FULL_NOW>; + io-channel-names = "usb_in_voltage", + "usb_in_current", + "chg_temp", + "die_temp", + "conn_temp", + "sbux_res", + "vph_voltage", + "skin_temp", + "resistance_id", + "voltage_now", + "temp", + "capacity", + "voltage_ocv", + "voltage_avg", + "debug_battery", + "real_capacity", + "cc_soc", + "current_now", + "voltage_max", + "charge_full", + "charge_counter", + "cycle_count", + "charge_full_design", + "time_to_full_now"; + qcom,battery-data = <&atp_batterydata>; + qcom,auto-recharge-soc = <98>; + qcom,step-charging-enable; + qcom,sw-jeita-enable; + qcom,charger-temp-max = <800>; + qcom,smb-temp-max = <800>; + qcom,suspend-input-on-debug-batt; + qcom,fcc-stepping-enable; + qcom,fcc-step-delay-ms = <100>; + qcom,fcc-step-size-ua = <100000>; + qcom,thermal-mitigation = <3600000 3000000 1500000 1000000 500000>; + qcom,smb-internal-pull-kohm = <0>; + qcom,en-skin-therm-mitigation; + qcom,hvdcp3-standalone-config; + dpdm-supply = <&usb2_phy>; + + smb5_vbus: qcom,smb5-vbus { + regulator-name = "smb5-vbus"; + }; + + smb5_vconn: qcom,smb5-vconn { + regulator-name = "smb5-vconn"; + }; +}; + +&pm7250b_qg { + #io-channel-cells = <1>; + io-channels = <&pm7250b_vadc ADC5_BAT_THERM_100K_PU>, + <&pm7250b_vadc ADC5_BAT_ID_100K_PU>, + <&pm7250b_charger PSY_IIO_INPUT_CURRENT_LIMITED>, + <&pm7250b_charger PSY_IIO_RECHARGE_SOC>, + <&pm7250b_charger PSY_IIO_FORCE_RECHARGE>, + <&pm7250b_charger PSY_IIO_CHARGE_DONE>; + io-channel-names = "batt-therm", + "batt-id", + "input_current_limited", + "recharge_soc", + "force_recharge", + "charge_done"; + qcom,battery-data = <&atp_batterydata>; + qcom,qg-iterm-ma = <150>; + qcom,hold-soc-while-full; + qcom,linearize-soc; + qcom,cl-feedback-on; + qcom,tcss-enable; + qcom,fvss-enable; + qcom,fvss-vbatt-mv = <3300>; + qcom,bass-enable; +}; + +&pm7250b_pdphy { + vdd-pdphy-supply = <&L10B>; + vbus-supply = <&smb5_vbus>; + vconn-supply = <&smb5_vconn>; + + #io-channel-cells = <1>; + io-channels = <&pm7250b_charger PSY_IIO_PD_ACTIVE>, + <&pm7250b_charger PSY_IIO_TYPEC_CC_ORIENTATION>, + <&pm7250b_charger PSY_IIO_CONNECTOR_TYPE>, + <&pm7250b_charger PSY_IIO_TYPEC_POWER_ROLE>, + <&pm7250b_charger PSY_IIO_PD_USB_SUSPEND_SUPPORTED>, + <&pm7250b_charger PSY_IIO_TYPEC_SRC_RP>, + <&pm7250b_charger PSY_IIO_PD_IN_HARD_RESET>, + <&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>, + <&pm7250b_charger PSY_IIO_PR_SWAP>, + <&pm7250b_charger PSY_IIO_PD_VOLTAGE_MIN>, + <&pm7250b_charger PSY_IIO_PD_VOLTAGE_MAX>, + <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>, + <&pm7250b_charger PSY_IIO_TYPEC_MODE>, + <&pm7250b_charger PSY_IIO_PE_START>; + io-channel-names = "pd_active", + "typec_cc_orientation", + "connector_type", + "typec_power_role", + "pd_usb_suspend_supported", + "typec_src_rp", + "pd_in_hard_reset", + "pr_current_max", + "pr_swap", + "pd_voltage_min", + "pd_voltage_max", + "real_type", + "typec_mode", + "pe_start"; +}; + +&pm7250b_adc_tm { + io-channels = <&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>, + <&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>; + + charger_skin_therm { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + conn_therm { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&thermal_zones { + chg-skin-therm-usr { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-governor = "user_space"; + thermal-sensors = <&pm7250b_adc_tm ADC5_AMUX_THM1_100K_PU>; + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + active-config1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-therm-usr { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-governor = "user_space"; + thermal-sensors = <&pm7250b_adc_tm ADC5_AMUX_THM3_100K_PU>; + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + active-config1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; +}; From 3ed72b74e81ef74292495ba5dfe85faf028d75eb Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Fri, 16 Apr 2021 19:04:25 -0700 Subject: [PATCH 3/3] ARM: dts: msm: Add extcon node for sdxlemur-atp Enable cable detection using pdphy functionality. Also disable PMX65 VBUS_DET as VBUS detection is through PM7250B. Change-Id: I9301e5f7412c5a443da4254524bcf7bd9e1fd79c --- qcom/sdxlemur-atp.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/qcom/sdxlemur-atp.dtsi b/qcom/sdxlemur-atp.dtsi index 71d059cff54d..b14515805db6 100644 --- a/qcom/sdxlemur-atp.dtsi +++ b/qcom/sdxlemur-atp.dtsi @@ -9,6 +9,18 @@ }; }; +&usb { + extcon = <&pm7250b_pdphy>, <&eud>; + + #io-channel-cells = <1>; + io-channels= <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>; + io-channel-names = "chg_type"; +}; + +&vbus_detect { + status = "disabled"; +}; + &pm7250b_clkdiv { clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo";