diff --git a/qcom/pmx65.dtsi b/qcom/pmx65.dtsi
new file mode 100644
index 000000000000..813eed17ef68
--- /dev/null
+++ b/qcom/pmx65.dtsi
@@ -0,0 +1,67 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	interrupt-controller;
+	#interrupt-cells = <4>;
+
+	qcom,pmx65@1 {
+		compatible = "qcom,spmi-pmic";
+		reg = <1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmx65_tz: qcom,temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmx65_pwm: pwms@e800 {
+			compatible = "qcom,pwm-lpg";
+			reg = <0xe800>;
+			reg-names = "lpg-base";
+			#pwm-cells = <2>;
+			qcom,num-lpg-channels = <4>;
+		};
+
+		pmx65_gpios: pinctrl@8800 {
+			compatible = "qcom,pmx65-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+&thermal_zones {
+	pmx65_temp_alarm: pmx65_tz {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+		thermal-governor = "step_wise";
+		thermal-sensors = <&pmx65_tz>;
+
+		trips {
+			pmx65_trip0: trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			pmx65_trip1: trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "critical";
+			};
+
+			pmx65_trip2: trip2 {
+				temperature = <145000>;
+				hysteresis = <0>;
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/qcom/sdxlemur-cdp.dtsi b/qcom/sdxlemur-cdp.dtsi
index 3bac905149f5..768d9aaa521c 100644
--- a/qcom/sdxlemur-cdp.dtsi
+++ b/qcom/sdxlemur-cdp.dtsi
@@ -1,3 +1,5 @@
+#include "sdxlemur-pmic-overlay.dtsi"
+
 &soc {
 
 };
diff --git a/qcom/sdxlemur-mtp.dtsi b/qcom/sdxlemur-mtp.dtsi
index 3bac905149f5..768d9aaa521c 100644
--- a/qcom/sdxlemur-mtp.dtsi
+++ b/qcom/sdxlemur-mtp.dtsi
@@ -1,3 +1,5 @@
+#include "sdxlemur-pmic-overlay.dtsi"
+
 &soc {
 
 };
diff --git a/qcom/sdxlemur-pmic-overlay.dtsi b/qcom/sdxlemur-pmic-overlay.dtsi
new file mode 100644
index 000000000000..67995251e247
--- /dev/null
+++ b/qcom/sdxlemur-pmic-overlay.dtsi
@@ -0,0 +1,8 @@
+#include "pmk8350.dtsi"
+#include "pmx65.dtsi"
+#include "pm7250b.dtsi"
+
+&pm7250b_clkdiv {
+	clocks = <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "xo";
+};
diff --git a/qcom/sdxlemur-rumi.dtsi b/qcom/sdxlemur-rumi.dtsi
index e9849a017bdd..f7394765df36 100644
--- a/qcom/sdxlemur-rumi.dtsi
+++ b/qcom/sdxlemur-rumi.dtsi
@@ -1,3 +1,5 @@
+#include "sdxlemur-pmic-overlay.dtsi"
+
 &soc {
 	timer {
 		clock-frequency = <96000>;
diff --git a/qcom/sdxlemur.dtsi b/qcom/sdxlemur.dtsi
index 7c3a86f8ed85..e7575156bad3 100644
--- a/qcom/sdxlemur.dtsi
+++ b/qcom/sdxlemur.dtsi
@@ -619,6 +619,8 @@
 		qcom,ee = <0>;
 	};
 
+	thermal_zones: thermal-zones {
+	};
 };
 
 #include "sdxlemur-pinctrl.dtsi"