dt-bindings: arm: msm: Add UFS ICE HW Node for SA8195 and SM8150

Add required dtsi changes for UFS-ICE HW enablement for SA8195 and SM8150.

Change-Id: I6183a169eef5dbb20dbdf235ce1243297431bffa

bindings/crypto/msm/ice.txt

@@ -0,0 +1,51 @@
+* Inline Crypto Engine (ICE)
+
+Required properties:
+  - compatible : should be "qcom,ice"
+  - reg : <register mapping>
+
+Optional properties:
+  - interrupt-names     	: name describing the interrupts for ICE IRQ
+  - interrupts          	: <interrupt mapping for ICE IRQ>
+  - qcom,enable-ice-clk 	: should enable clocks for ICE HW
+  - clocks              	: List of phandle and clock specifier pairs
+  - clock-names         	: List of clock input name strings sorted in the same
+                          	  order as the clocks property.
+  - qocm,op-freq-hz     	: max clock speed sorted in the same order as the clocks
+                          	  property.
+  - qcom,instance-type  	: describe the storage type for which ICE node is defined
+			 	  currently, only "ufs" and "sdcc" are supported storage type
+  - vdd-hba-supply		: regulated supply to be used by ICE HW
+  - qcom,bus-vector-names	: bus vectors mapping
+
+Example:
+        ufs_ice: ufsice@630000 {
+                compatible = "qcom,ice";
+                reg = <0x630000 0x8000>;
+                interrupt-names = "ufs_ice_nonsec_level_irq", "ufs_ice_sec_level_irq";
+                interrupts = <0 258 0>, <0 257 0>;
+                qcom,enable-ice-clk;
+                clock-names = "ice_core_clk_src", "ice_core_clk";
+                clocks = <&clock_gcc clk_ufs_ice_core_clk_src>,
+                         <&clock_gcc clk_gcc_ufs_ice_core_clk>;
+                qcom,op-freq-hz = <300000000>, <0>;
+		qcom,instance-type = "ufs";
+                status = "disabled";
+        };
+
+	ufs_card_ice: ufscardice@1db0000 {
+		compatible = "qcom,ice_card";
+		reg = <0x1db0000 0x8000>;
+		qcom,enable-ice-clk;
+		clock-names = "ufs_core_clk", "bus_clk",
+			      "iface_clk", "ice_core_clk";
+		clocks = <&clock_gcc GCC_UFS_CARD_AXI_CLK>,
+			 <&clock_gcc GCC_UFS_CARD_CLKREF_CLK>,
+			 <&clock_gcc GCC_UFS_CARD_AHB_CLK>,
+			 <&clock_gcc GCC_UFS_CARD_ICE_CORE_CLK>;
+		qcom,op-freq-hz = <0>, <0>, <0>, <300000000>;
+		vdd-hba-supply = <&ufs_card_gdsc>;
+		qcom,bus-vector-names = "MIN",
+					"MAX";
+		qcom,instance-type = "ufs_card";
+	};