A-Team_Digital_Solutions/android_kernel_motorola_sm6375
Watch
2
0
Fork
You've already forked android_kernel_motorola_sm6375
 0
mirror of https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git synced 2026-10-09 21:59:12 -04:00
Code Issues Projects Releases Packages Wiki Activity

power: improve debug prints

Browse source 
improve debug prints
change some error words

Change-Id: I85b4856c72c0cc3f93eafbd926a6ad4f25000121
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1286760
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
This commit is contained in:
xuwt2 2018-12-24 16:36:35 +08:00 • committed by Wentao Xu
commit dfe97e9f53
1 changed files with 17 additions and 17 deletions
Download patch file Download diff file Expand all files Collapse all files

34
drivers/power/mmi_pl_chg_manager/mmi_pl_chg_manager.c
View file

@ -455,7 +455,7 @@ static void mmi_update_flashc_status(struct mmi_pl_chg_manager *chip)
}
power_supply_put(chip->flashc_psy);
mmi_pl_dbg(chip, PR_MOTO, "flash charger IC : ---- status update ---\n");
mmi_pl_dbg(chip, PR_MOTO, "flash charge IC : ---- status update ---\n");
mmi_pl_dbg(chip, PR_MOTO, "vbat_volt %d \n",
chip->flashc_handle.vbat_volt);
mmi_pl_dbg(chip, PR_MOTO, "ibat_curr %d \n",
@ -507,7 +507,7 @@ static void mmi_update_flashc_status(struct mmi_pl_chg_manager *chip)
chip->flashc_handle.bus_therm_fault);
mmi_pl_dbg(chip, PR_MOTO, "die_therm_fault %d \n",
chip->flashc_handle.die_therm_fault);
mmi_pl_dbg(chip, PR_MOTO, "flash charger : ---- over ---\n");
mmi_pl_dbg(chip, PR_MOTO, "flash charge : ---- over ---\n");
}
@ -1070,7 +1070,7 @@ static void mmi_pl_sm_work_func(struct work_struct *work)
< chip->sys_configs.flashc_min_vbat_start
|| chip->flashc_cc_max_curr_pre
<= chip->pmic_step_curr) {
mmi_pl_dbg(chip, PR_MOTO, "start switch charger due to : "
mmi_pl_dbg(chip, PR_MOTO, "start switch charge due to : "
"vbat %d, flashc_min_vbat %d, pps_support %d, "
"flashc_cc_max_curr %d\n",
chip->pmic_handle.vbat_volt,
@ -1154,13 +1154,13 @@ static void mmi_pl_sm_work_func(struct work_struct *work)
&& !chip->enter_sw_loop) {
mmi_pl_dbg(chip, PR_MOTO,
"battery volt %d, start flash charger\n",
"battery volt %d, start flash charge\n",
chip->pmic_handle.vbat_volt);
mmi_pl_pm_move_state(chip, PM_STATE_FLASHC_ENTRY);
heartbeat_dely_ms = HEARTBEAT_NEXT_STATE_MS;
} else {
mmi_pl_dbg(chip, PR_MOTO,
"keep in sw charger, vbat %d ,ibat %d\n",
"keep in sw charge, vbat %d ,ibat %d\n",
chip->pmic_handle.vbat_volt,
chip->pmic_handle.ibat_curr);
heartbeat_dely_ms = HEARTBEAT_lOOP_WAIT_MS;
@ -1169,7 +1169,7 @@ static void mmi_pl_sm_work_func(struct work_struct *work)
case PM_STATE_FLASHC_ENTRY:
if (!chip->pmic_ichg_limited) {
mmi_pl_dbg(chip, PR_MOTO,
"flashc charger, limit pmic output curr %d\n",
"flashc charge, limit pmic output curr %d\n",
chip->sys_configs.pmic_curr_lp_lmt);
rc = mmi_pl_pm_pmic_ichg_lmt(chip,
chip->sys_configs.pmic_curr_lp_lmt);
@ -1231,7 +1231,7 @@ static void mmi_pl_sm_work_func(struct work_struct *work)
chip->request_current = request_curr;
chip->request_volt = request_volt;
mmi_pl_dbg(chip, PR_MOTO, "flashc charger ready 1 step,"
mmi_pl_dbg(chip, PR_MOTO, "flashc charge ready 1 step,"
"init pps output volt %d (2*vbat + %d uv),"
"output curr %d, pdo %d\n",
request_volt,
@ -1247,7 +1247,7 @@ static void mmi_pl_sm_work_func(struct work_struct *work)
heartbeat_dely_ms = HEARTBEAT_SHORT_DELAY_MS;
break;
case PM_STATE_FLASHC_TUNNING_CURR:
mmi_pl_dbg(chip, PR_MOTO, "flashc charger ready 2 step,"
mmi_pl_dbg(chip, PR_MOTO, "flashc charge ready 2 step,"
"increase pps current\n");
if ((chip->request_current +
chip->sys_configs.flashc_curr_up_steps)
@ -1309,7 +1309,7 @@ static void mmi_pl_sm_work_func(struct work_struct *work)
}
break;
case PM_STATE_FLASHC_TUNNING_VOLT:
mmi_pl_dbg(chip, PR_MOTO, "flashc charger ready 3,"
mmi_pl_dbg(chip, PR_MOTO, "flashc charge ready 3 step,"
"increase pps voltage, effective flashc cc max curr %d,"
"__param_flashc_cc_max_ua %d,"
" allocated from pps max curr %d\n",
@ -1406,7 +1406,7 @@ static void mmi_pl_sm_work_func(struct work_struct *work)
}
break;
case PM_STATE_FLASHC_CC_LOOP:
mmi_pl_dbg(chip, PR_MOTO, "flashc charger CC loop\n");
mmi_pl_dbg(chip, PR_MOTO, "flashc charge CC loop\n");
heartbeat_dely_ms = HEARTBEAT_lOOP_WAIT_MS;
if (chip->pps_result < 0) {
@ -1467,7 +1467,7 @@ static void mmi_pl_sm_work_func(struct work_struct *work)
chip->flashc_cc_tunning_cnt = 0;
mmi_pl_dbg(chip, PR_MOTO, "need increase pps voltage,"
"or decrease pps current"
"to keep CC charger power,"
"to keep CC charge power,"
"request volt %d, "
"request curr %d\n",
chip->request_volt,
@ -1477,7 +1477,7 @@ static void mmi_pl_sm_work_func(struct work_struct *work)
&& chip->request_volt < chip->pps_voltage_max) {
chip->flashc_cc_tunning_cnt++;
mmi_pl_dbg(chip, PR_MOTO,
"flashc charger CC tunning cnt++ : %d \n",
"flashc charge CC tunning cnt++ : %d \n",
chip->flashc_cc_tunning_cnt);
} else
chip->flashc_cc_tunning_cnt = 0;
@ -1493,7 +1493,7 @@ static void mmi_pl_sm_work_func(struct work_struct *work)
} else {
chip->flashc_taper_cnt++;
mmi_pl_dbg(chip, PR_MOTO,
"flashc CC charger taper_cnt %d, "
"flashc CC charge taper_cnt %d, "
"flashc_cv_max_volt - 20mv %d\n",
chip->flashc_taper_cnt,
chip->flashc_cv_max_volt_pre - 20000);
@ -1509,7 +1509,7 @@ static void mmi_pl_sm_work_func(struct work_struct *work)
break;
case PM_STATE_FLASHC_CV_LOOP:
heartbeat_dely_ms = HEARTBEAT_lOOP_WAIT_MS;
mmi_pl_dbg(chip, PR_MOTO, "flashc charger CV loop,"
mmi_pl_dbg(chip, PR_MOTO, "flashc charge CV loop,"
"chrg_step %d , pre_chrg_step %d \n",
chrg_step, chip->pres_chrg_step);
@ -1562,7 +1562,7 @@ static void mmi_pl_sm_work_func(struct work_struct *work)
if (chip->flashc_taper_cnt >= FLASHC_TAPPER_COUNT) {
if (ibat_curr < chip->pmic_step_curr) {
mmi_pl_dbg(chip, PR_MOTO,
"Ready to quit flashc CV charger, "
"Ready to quit flashc CV charge, "
"chrg step %d ,"
"battery curr %d, "
"flashc max curr %d, "
@ -1585,7 +1585,7 @@ static void mmi_pl_sm_work_func(struct work_struct *work)
chip->flashc_cv_taper_curr_pre = flashc_cv_taper_curr;
mmi_pl_dbg(chip, PR_MOTO,
"Start jump to the next charger step %d \n",
"Start jump to the next charge step %d \n",
chip->pres_chrg_step);
mmi_pl_pm_move_state(chip, PM_STATE_FLASHC_CC_LOOP);
@ -2551,5 +2551,5 @@ module_exit(mmi_pl_chg_manager_exit);
MODULE_ALIAS("platform:mmi_pl_chg_manager");
MODULE_AUTHOR("Motorola Mobility LLC");
MODULE_DESCRIPTION("Motorola Mobility parallel charger");
MODULE_DESCRIPTION("Motorola Mobility parallel charge");
MODULE_LICENSE("GPL");