qcacld-3.0: Add INI template for P2P feature

Add INI template for P2P feature for documentation.

Change-Id: I7d9fcb2272e0d105fd81bbeea9e387ce40ffa5b5
CRs-Fixed: 1116847

core/hdd/inc/wlan_hdd_cfg.h

@@ -4979,6 +4979,24 @@ enum hdd_link_speed_rpt_type {
 #define CFG_LINK_SPEED_RSSI_LOW_MAX                (0)
 #define CFG_LINK_SPEED_RSSI_LOW_DEFAULT            (-80)
 
+/*
+ * <ini>
+ * isP2pDeviceAddrAdministrated - Enables to derive the P2P MAC address from
+ * the primary MAC address
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * This ini is used to enable/disable to derive the P2P MAC address from the
+ * primary MAC address.
+ *
+ * Supported Feature: P2P
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+
 #define CFG_P2P_DEVICE_ADDRESS_ADMINISTRATED_NAME                "isP2pDeviceAddrAdministrated"
 #define CFG_P2P_DEVICE_ADDRESS_ADMINISTRATED_MIN                 (0)
 #define CFG_P2P_DEVICE_ADDRESS_ADMINISTRATED_MAX                 (1)
@@ -5333,13 +5351,27 @@ enum hdd_link_speed_rpt_type {
 #define CFG_ENABLE_SKIP_DFS_IN_P2P_SEARCH_MIN        (0)
 #define CFG_ENABLE_SKIP_DFS_IN_P2P_SEARCH_MAX        (1)
 #define CFG_ENABLE_SKIP_DFS_IN_P2P_SEARCH_DEFAULT    (1)
-
 /*
- * Ignore Dynamic Dtim in case of P2P
- * Options
+ * <ini>
+ * gIgnoreDynamicDtimInP2pMode - Ignore Dynamic Dtim in case of P2P
+ * Options.
+ * @Min: 0
+ * @Max: 1
+ * @Default: 0
+ *
+ * This ini is used to decide if Dynamic Dtim needs to be consider or
+ * not in case of P2P.
  * 0 - Consider Dynamic Dtim incase of P2P
  * 1 - Ignore Dynamic Dtim incase of P2P
+ *
+ * Supported Feature: P2P
+ *
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
  */
+
 #define CFG_IGNORE_DYNAMIC_DTIM_IN_P2P_MODE_NAME       "gIgnoreDynamicDtimInP2pMode"
 #define CFG_IGNORE_DYNAMIC_DTIM_IN_P2P_MODE_MIN        (0)
 #define CFG_IGNORE_DYNAMIC_DTIM_IN_P2P_MODE_MAX        (1)
@@ -6565,9 +6597,20 @@ enum hdd_link_speed_rpt_type {
 #define CFG_ENABLE_VHT_FOR_24GHZ_DEFAULT          (0)
 
 /*
- * Parameter to control VHT support based on vendor ie in 2.4 GHz band
+ * gEnableVendorVhtFor24GHzBand:Parameter to control VHT support
+ * based on vendor ie in 2.4 GHz band
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
  * This parameter will enable SAP to read VHT capability in vendor ie in Assoc
  * Req and send VHT caps in Resp to establish connection in VHT Mode.
+ * Supported Feature: SAP
+ *
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
  */
 #define CFG_ENABLE_VENDOR_VHT_FOR_24GHZ_NAME      "gEnableVendorVhtFor24GHzBand"
 #define CFG_ENABLE_VENDOR_VHT_FOR_24GHZ_MIN       (0)
@@ -7812,6 +7855,27 @@ enum hdd_link_speed_rpt_type {
 #define CFG_ENABLE_MAC_ADDR_SPOOFING_MAX            (1)
 #define CFG_ENABLE_MAC_ADDR_SPOOFING_DEFAULT        (1)
 
+/*
+ * <ini>
+ * gP2PListenDeferInterval - Defer Remain on channel for some duration
+ * @Min: 100
+ * @Max: 200
+ * @Default: 100
+ *
+ * This ini is used to defer back to back RoC request when sta is
+ * connected.
+ * If back to back listen received when sta is connected then fw is
+ * not getting enough time to spend on home channel so it leading to
+ * heartbeat failure.
+ *
+ * Supported Feature: P2P
+ *
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+
 #define CFG_P2P_LISTEN_DEFER_INTERVAL_NAME        "gP2PListenDeferInterval"
 #define CFG_P2P_LISTEN_DEFER_INTERVAL_MIN         (100)
 #define CFG_P2P_LISTEN_DEFER_INTERVAL_MAX         (200)
@@ -7864,6 +7928,32 @@ enum hdd_link_speed_rpt_type {
 #define CFG_SAP_MCC_CHANNEL_AVOIDANCE_DEFAULT      (0)
 #endif /* FEATURE_AP_MCC_CH_AVOIDANCE */
 
+/*
+ * <ini>
+ * gAP11ACOverride - Override 11AC in driver even if supplicant or hostapd
+ * configures HT.
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * This ini is used to enable/disable 11AC override.
+ * 1. P2P GO or SAP also follows start_bss and since p2p GO or SAP
+ *    could not be  configured to setup VHT channel width in
+ *    wpa_supplicant, driver can override 11AC.
+ * 2. Android UI does not provide advanced configuration options
+ *    for SoftAP
+ *    Default override enabled for android. MDM shall
+ *    disable it in ini
+ *
+ *
+ * Supported Feature: SAP
+ *
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+
 #define CFG_SAP_P2P_11AC_OVERRIDE_NAME             "gAP11ACOverride"
 #define CFG_SAP_P2P_11AC_OVERRIDE_MIN              (0)
 #define CFG_SAP_P2P_11AC_OVERRIDE_MAX              (1)
@@ -8192,10 +8282,26 @@ enum dot11p_mode {
 #define CFG_DOT11P_MODE_MIN              (WLAN_HDD_11P_DISABLED)
 #define CFG_DOT11P_MODE_MAX              (WLAN_HDD_11P_CONCURRENT)
 
-/* When gEnable_go_cts2self_for_sta is
+/*
+ * <ini>
+ * gEnable_go_cts2self_for_sta - Indicate firmware to stop NOA and
+ * start using cts2self
+ * @Min: 1
+ * @Max: 1
+ * @Default: 0
+ *
+ * When gEnable_go_cts2self_for_sta is
  * enabled  then if a legacy client connects to P2P GO,
  * Host will send a WMI VDEV command to FW to stop using NOA for P2P GO
  * and start using CTS2SELF.
+ *
+ *
+ * Supported Feature: P2P
+ *
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
  */
 #define CFG_ENABLE_GO_CTS2SELF_FOR_STA   "gEnable_go_cts2self_for_sta"
 #define CFG_ENABLE_GO_CTS2SELF_FOR_STA_DEFAULT  (0)