TTY and Serial driver update for 4.7-rc1

Here's the large TTY and Serial driver update for 4.7-rc1.
 
 A few new serial drivers are added here, and Peter has fixed a bunch of
 long-standing bugs in the tty layer and serial drivers as normal.  Full
 details in the shortlog.
 
 All of these have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <[email protected]>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlc/0/oACgkQMUfUDdst+ynzyQCgsa54VNijdAzU6AA5HEfqmf2M
 cGMAn1boH7hUWlAbJmzzihx4JASoGjYW
 =V5VH
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here's the large TTY and Serial driver update for 4.7-rc1.

  A few new serial drivers are added here, and Peter has fixed a bunch
  of long-standing bugs in the tty layer and serial drivers as normal.
  Full details in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits)
  MAINTAINERS: 8250: remove website reference
  serial: core: Fix port mutex assert if lockdep disabled
  serial: 8250_dw: fix wrong logic in dw8250_check_lcr()
  tty: vt, finish looping on duplicate
  tty: vt, return error when con_startup fails
  QE-UART: add "fsl,t1040-ucc-uart" to of_device_id
  serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  serial: 8250dw: Add device HID for future AMD UART controller
  Fix OpenSSH pty regression on close
  serial: mctrl_gpio: add IRQ locking
  serial: 8250: Integrate Fintek into 8250_base
  serial: mps2-uart: add support for early console
  serial: mps2-uart: add MPS2 UART driver
  dt-bindings: document the MPS2 UART bindings
  serial: sirf: Use generic uart-has-rtscts DT property
  serial: sirf: Introduce helper variable struct device_node *np
  serial: mxs-auart: Use generic uart-has-rtscts DT property
  serial: imx: Use generic uart-has-rtscts DT property
  doc: DT: Add Generic Serial Device Tree Bindings
  serial: 8250: of: Make tegra_serial_handle_break() static
  ...

drivers/usb/class/cdc-acm.c

@@ -1680,7 +1680,7 @@ static int acm_resume(struct usb_interface *intf)
 	if (--acm->susp_count)
 		goto out;
 
-	if (test_bit(ASYNCB_INITIALIZED, &acm->port.flags)) {
+	if (tty_port_initialized(&acm->port)) {
 		rv = usb_submit_urb(acm->ctrlurb, GFP_ATOMIC);
 
 		for (;;) {
@@ -1710,7 +1710,7 @@ static int acm_reset_resume(struct usb_interface *intf)
 {
 	struct acm *acm = usb_get_intfdata(intf);
 
-	if (test_bit(ASYNCB_INITIALIZED, &acm->port.flags))
+	if (tty_port_initialized(&acm->port))
 		tty_port_tty_hangup(&acm->port, false);
 
 	return acm_resume(intf);

drivers/usb/gadget/function/u_serial.c

@@ -512,7 +512,7 @@ static void gs_rx_push(unsigned long _port)
 		req = list_first_entry(queue, struct usb_request, list);
 
 		/* leave data queued if tty was rx throttled */
-		if (tty && test_bit(TTY_THROTTLED, &tty->flags))
+		if (tty && tty_throttled(tty))
 			break;
 
 		switch (req->status) {
@@ -579,7 +579,7 @@ static void gs_rx_push(unsigned long _port)
 	 * from starving ... but it's not clear that case ever happens.
 	 */
 	if (!list_empty(queue) && tty) {
-		if (!test_bit(TTY_THROTTLED, &tty->flags)) {
+		if (!tty_throttled(tty)) {
 			if (do_push)
 				tasklet_schedule(&port->push);
 			else

drivers/usb/misc/sisusbvga/sisusb_con.c

@@ -601,7 +601,7 @@ sisusbcon_save_screen(struct vc_data *c)
 
 /* interface routine */
 static int
-sisusbcon_set_palette(struct vc_data *c, unsigned char *table)
+sisusbcon_set_palette(struct vc_data *c, const unsigned char *table)
 {
 	struct sisusb_usb_data *sisusb;
 	int i, j;

drivers/usb/serial/console.c

@@ -127,7 +127,7 @@ static int usb_console_setup(struct console *co, char *options)
 	info->port = port;
 
 	++port->port.count;
-	if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
+	if (!tty_port_initialized(&port->port)) {
 		if (serial->type->set_termios) {
 			/*
 			 * allocate a fake tty so the driver can initialize
@@ -168,7 +168,7 @@ static int usb_console_setup(struct console *co, char *options)
 			tty_port_tty_set(&port->port, NULL);
 			tty_kref_put(tty);
 		}
-		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
+		tty_port_set_initialized(&port->port, 1);
 	}
 	/* Now that any required fake tty operations are completed restore
 	 * the tty port count */

drivers/usb/serial/digi_acceleport.c

@@ -699,8 +699,7 @@ static void digi_set_termios(struct tty_struct *tty,
 			/* don't set RTS if using hardware flow control */
 			/* and throttling input */
 			modem_signals = TIOCM_DTR;
-			if (!C_CRTSCTS(tty) ||
-			    !test_bit(TTY_THROTTLED, &tty->flags))
+			if (!C_CRTSCTS(tty) || !tty_throttled(tty))
 				modem_signals |= TIOCM_RTS;
 			digi_set_modem_signals(port, modem_signals, 1);
 		}

drivers/usb/serial/generic.c

@@ -473,7 +473,7 @@ static bool usb_serial_generic_msr_changed(struct tty_struct *tty,
 	 * Use tty-port initialised flag to detect all hangups including the
 	 * one generated at USB-device disconnect.
 	 */
-	if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+	if (!tty_port_initialized(&port->port))
 		return true;
 
 	spin_lock_irqsave(&port->lock, flags);
@@ -503,7 +503,7 @@ int usb_serial_generic_tiocmiwait(struct tty_struct *tty, unsigned long arg)
 
 	ret = wait_event_interruptible(port->port.delta_msr_wait,
 			usb_serial_generic_msr_changed(tty, arg, &cnow));
-	if (!ret && !test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+	if (!ret && !tty_port_initialized(&port->port))
 		ret = -EIO;
 
 	return ret;
@@ -606,7 +606,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
-		if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+		if (!tty_port_initialized(&port->port))
 			continue;
 
 		if (port->bulk_in_size) {

drivers/usb/serial/mxuport.c

@@ -503,7 +503,7 @@ static void mxuport_process_read_urb_demux_data(struct urb *urb)
 			return;
 		}
 
-		if (test_bit(ASYNCB_INITIALIZED, &demux_port->port.flags)) {
+		if (tty_port_initialized(&demux_port->port)) {
 			ch = data + HEADER_SIZE;
 			mxuport_process_read_urb_data(demux_port, ch, rcv_len);
 		} else {
@@ -544,7 +544,7 @@ static void mxuport_process_read_urb_demux_event(struct urb *urb)
 		}
 
 		demux_port = serial->port[rcv_port];
-		if (test_bit(ASYNCB_INITIALIZED, &demux_port->port.flags)) {
+		if (tty_port_initialized(&demux_port->port)) {
 			ch = data + HEADER_SIZE;
 			rcv_event = get_unaligned_be16(data + 2);
 			mxuport_process_read_urb_event(demux_port, ch,
@@ -1339,7 +1339,7 @@ static int mxuport_resume(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
-		if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+		if (!tty_port_initialized(&port->port))
 			continue;
 
 		r = usb_serial_generic_write_start(port, GFP_NOIO);

drivers/usb/serial/sierra.c

@@ -776,7 +776,7 @@ static void sierra_close(struct usb_serial_port *port)
 
 	/*
 	 * Need to take susp_lock to make sure port is not already being
-	 * resumed, but no need to hold it due to ASYNC_INITIALIZED.
+	 * resumed, but no need to hold it due to initialized
 	 */
 	spin_lock_irq(&intfdata->susp_lock);
 	if (--intfdata->open_ports == 0)
@@ -1039,7 +1039,7 @@ static int sierra_resume(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
 
-		if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+		if (!tty_port_initialized(&port->port))
 			continue;
 
 		err = sierra_submit_delayed_urbs(port);

drivers/usb/serial/usb-serial.c

@@ -254,7 +254,7 @@ static int serial_open(struct tty_struct *tty, struct file *filp)
  *
  * Shut down a USB serial port. Serialized against activate by the
  * tport mutex and kept to matching open/close pairs
- * of calls by the ASYNCB_INITIALIZED flag.
+ * of calls by the initialized flag.
  *
  * Not called if tty is console.
  */

drivers/usb/serial/usb_wwan.c

@@ -464,7 +464,7 @@ void usb_wwan_close(struct usb_serial_port *port)
 
 	/*
 	 * Need to take susp_lock to make sure port is not already being
-	 * resumed, but no need to hold it due to ASYNC_INITIALIZED.
+	 * resumed, but no need to hold it due to initialized
 	 */
 	spin_lock_irq(&intfdata->susp_lock);
 	if (--intfdata->open_ports == 0)
@@ -682,7 +682,7 @@ int usb_wwan_resume(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
 
-		if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+		if (!tty_port_initialized(&port->port))
 			continue;
 
 		portdata = usb_get_serial_port_data(port);