Merge branch 'master' into for-next

Sync with Linus' tree to be able to apply fixes on top of newer things
in tree (efi-stub).

Signed-off-by: Jiri Kosina <[email protected]>

Documentation/kernel-parameters.txt

@@ -480,6 +480,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format: <io>,<irq>,<mode>
 			See header of drivers/net/hamradio/baycom_ser_hdx.c.
 
+	blkdevparts=	Manual partition parsing of block device(s) for
+			embedded devices based on command line input.
+			See Documentation/block/cmdline-partition.txt
+
 	boot_delay=	Milliseconds to delay each printk during boot.
 			Values larger than 10 seconds (10000) are changed to
 			no delay (0).
@@ -850,6 +854,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	earlyprintk=	[X86,SH,BLACKFIN,ARM]
 			earlyprintk=vga
+			earlyprintk=efi
 			earlyprintk=xen
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=serial[,0x...[,baudrate]]
@@ -863,7 +868,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Append ",keep" to not disable it when the real console
 			takes over.
 
-			Only vga or serial or usb debug port at a time.
+			Only one of vga, efi, serial, or usb debug port can
+			be used at a time.
 
 			Currently only ttyS0 and ttyS1 may be specified by
 			name.  Other I/O ports may be explicitly specified
@@ -877,8 +883,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Interaction with the standard serial driver is not
 			very good.
 
-			The VGA output is eventually overwritten by the real
-			console.
+			The VGA and EFI output is eventually overwritten by
+			the real console.
 
 			The xen output can only be used by Xen PV guests.
 
@@ -1071,6 +1077,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				VIA, nVidia)
 			verbose: show contents of HPET registers during setup
 
+	hpet_mmap=	[X86, HPET_MMAP] Allow userspace to mmap HPET
+			registers.  Default set by CONFIG_HPET_MMAP_DEFAULT.
+
 	hugepages=	[HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
 	hugepagesz=	[HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
 			On x86-64 and powerpc, this option can be specified
@@ -1188,15 +1197,24 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			owned by uid=0.
 
 	ima_hash=	[IMA]
-			Format: { "sha1" | "md5" }
+			Format: { md5 | sha1 | rmd160 | sha256 | sha384
+				   | sha512 | ... }
 			default: "sha1"
 
+			The list of supported hash algorithms is defined
+			in crypto/hash_info.h.
+
 	ima_tcb		[IMA]
 			Load a policy which meets the needs of the Trusted
 			Computing Base.  This means IMA will measure all
 			programs exec'd, files mmap'd for exec, and all files
 			opened for read by uid=0.
 
+	ima_template=   [IMA]
+			Select one of defined IMA measurements template formats.
+			Formats: { "ima" | "ima-ng" }
+			Default: "ima-ng"
+
 	init=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /sbin/init as init
@@ -1364,7 +1382,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			pages. In the event, a node is too small to have both
 			kernelcore and Movable pages, kernelcore pages will
 			take priority and other nodes will have a larger number
-			of kernelcore pages.  The Movable zone is used for the
+			of Movable pages.  The Movable zone is used for the
 			allocation of pages that may be reclaimed or moved
 			by the page migration subsystem.  This means that
 			HugeTLB pages may not be allocated from this zone.
@@ -1776,6 +1794,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			that the amount of memory usable for all allocations
 			is not too small.
 
+	movable_node	[KNL,X86] Boot-time switch to enable the effects
+			of CONFIG_MOVABLE_NODE=y. See mm/Kconfig for details.
+
 	MTD_Partition=	[MTD]
 			Format: <name>,<region-number>,<size>,<offset>
 
@@ -1905,6 +1926,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			will be sent.
 			The default is to send the implementation identification
 			information.
+	
+	nfs.recover_lost_locks =
+			[NFSv4] Attempt to recover locks that were lost due
+			to a lease timeout on the server. Please note that
+			doing this risks data corruption, since there are
+			no guarantees that the file will remain unchanged
+			after the locks are lost.
+			If you want to enable the kernel legacy behaviour of
+			attempting to recover these locks, then set this
+			parameter to '1'.
+			The default parameter value of '0' causes the kernel
+			not to attempt recovery of lost locks.
 
 	nfsd.nfs4_disable_idmapping=
 			[NFSv4] When set to the default of '1', the NFSv4
@@ -2590,7 +2623,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
 			See Documentation/blockdev/ramdisk.txt.
 
-	rcu_nocbs=	[KNL,BOOT]
+	rcu_nocbs=	[KNL]
 			In kernels built with CONFIG_RCU_NOCB_CPU=y, set
 			the specified list of CPUs to be no-callback CPUs.
 			Invocation of these CPUs' RCU callbacks will
@@ -2603,7 +2636,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			real-time workloads.  It can also improve energy
 			efficiency for asymmetric multiprocessors.
 
-	rcu_nocb_poll	[KNL,BOOT]
+	rcu_nocb_poll	[KNL]
 			Rather than requiring that offloaded CPUs
 			(specified by rcu_nocbs= above) explicitly
 			awaken the corresponding "rcuoN" kthreads,
@@ -2614,126 +2647,145 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			energy efficiency by requiring that the kthreads
 			periodically wake up to do the polling.
 
-	rcutree.blimit=	[KNL,BOOT]
+	rcutree.blimit=	[KNL]
 			Set maximum number of finished RCU callbacks to process
 			in one batch.
 
-	rcutree.fanout_leaf=	[KNL,BOOT]
+	rcutree.rcu_fanout_leaf= [KNL]
 			Increase the number of CPUs assigned to each
 			leaf rcu_node structure.  Useful for very large
 			systems.
 
-	rcutree.jiffies_till_first_fqs= [KNL,BOOT]
+	rcutree.jiffies_till_first_fqs= [KNL]
 			Set delay from grace-period initialization to
 			first attempt to force quiescent states.
 			Units are jiffies, minimum value is zero,
 			and maximum value is HZ.
 
-	rcutree.jiffies_till_next_fqs= [KNL,BOOT]
+	rcutree.jiffies_till_next_fqs= [KNL]
 			Set delay between subsequent attempts to force
 			quiescent states.  Units are jiffies, minimum
 			value is one, and maximum value is HZ.
 
-	rcutree.qhimark=	[KNL,BOOT]
+	rcutree.qhimark= [KNL]
 			Set threshold of queued
 			RCU callbacks over which batch limiting is disabled.
 
-	rcutree.qlowmark=	[KNL,BOOT]
+	rcutree.qlowmark= [KNL]
 			Set threshold of queued RCU callbacks below which
 			batch limiting is re-enabled.
 
-	rcutree.rcu_cpu_stall_suppress=	[KNL,BOOT]
-			Suppress RCU CPU stall warning messages.
-
-	rcutree.rcu_cpu_stall_timeout= [KNL,BOOT]
-			Set timeout for RCU CPU stall warning messages.
-
-	rcutree.rcu_idle_gp_delay=	[KNL,BOOT]
+	rcutree.rcu_idle_gp_delay= [KNL]
 			Set wakeup interval for idle CPUs that have
 			RCU callbacks (RCU_FAST_NO_HZ=y).
 
-	rcutree.rcu_idle_lazy_gp_delay=	[KNL,BOOT]
+	rcutree.rcu_idle_lazy_gp_delay= [KNL]
 			Set wakeup interval for idle CPUs that have
 			only "lazy" RCU callbacks (RCU_FAST_NO_HZ=y).
 			Lazy RCU callbacks are those which RCU can
 			prove do nothing more than free memory.
 
-	rcutorture.fqs_duration= [KNL,BOOT]
+	rcutorture.fqs_duration= [KNL]
 			Set duration of force_quiescent_state bursts.
 
-	rcutorture.fqs_holdoff= [KNL,BOOT]
+	rcutorture.fqs_holdoff= [KNL]
 			Set holdoff time within force_quiescent_state bursts.
 
-	rcutorture.fqs_stutter= [KNL,BOOT]
+	rcutorture.fqs_stutter= [KNL]
 			Set wait time between force_quiescent_state bursts.
 
-	rcutorture.irqreader= [KNL,BOOT]
-			Test RCU readers from irq handlers.
+	rcutorture.gp_exp= [KNL]
+			Use expedited update-side primitives.
 
-	rcutorture.n_barrier_cbs= [KNL,BOOT]
+	rcutorture.gp_normal= [KNL]
+			Use normal (non-expedited) update-side primitives.
+			If both gp_exp and gp_normal are set, do both.
+			If neither gp_exp nor gp_normal are set, still
+			do both.
+
+	rcutorture.n_barrier_cbs= [KNL]
 			Set callbacks/threads for rcu_barrier() testing.
 
-	rcutorture.nfakewriters= [KNL,BOOT]
+	rcutorture.nfakewriters= [KNL]
 			Set number of concurrent RCU writers.  These just
 			stress RCU, they don't participate in the actual
 			test, hence the "fake".
 
-	rcutorture.nreaders= [KNL,BOOT]
+	rcutorture.nreaders= [KNL]
 			Set number of RCU readers.
 
-	rcutorture.onoff_holdoff= [KNL,BOOT]
+	rcutorture.object_debug= [KNL]
+			Enable debug-object double-call_rcu() testing.
+
+	rcutorture.onoff_holdoff= [KNL]
 			Set time (s) after boot for CPU-hotplug testing.
 
-	rcutorture.onoff_interval= [KNL,BOOT]
+	rcutorture.onoff_interval= [KNL]
 			Set time (s) between CPU-hotplug operations, or
 			zero to disable CPU-hotplug testing.
 
-	rcutorture.shuffle_interval= [KNL,BOOT]
+	rcutorture.rcutorture_runnable= [BOOT]
+			Start rcutorture running at boot time.
+
+	rcutorture.shuffle_interval= [KNL]
 			Set task-shuffle interval (s).  Shuffling tasks
 			allows some CPUs to go into dyntick-idle mode
 			during the rcutorture test.
 
-	rcutorture.shutdown_secs= [KNL,BOOT]
+	rcutorture.shutdown_secs= [KNL]
 			Set time (s) after boot system shutdown.  This
 			is useful for hands-off automated testing.
 
-	rcutorture.stall_cpu= [KNL,BOOT]
+	rcutorture.stall_cpu= [KNL]
 			Duration of CPU stall (s) to test RCU CPU stall
 			warnings, zero to disable.
 
-	rcutorture.stall_cpu_holdoff= [KNL,BOOT]
+	rcutorture.stall_cpu_holdoff= [KNL]
 			Time to wait (s) after boot before inducing stall.
 
-	rcutorture.stat_interval= [KNL,BOOT]
+	rcutorture.stat_interval= [KNL]
 			Time (s) between statistics printk()s.
 
-	rcutorture.stutter= [KNL,BOOT]
+	rcutorture.stutter= [KNL]
 			Time (s) to stutter testing, for example, specifying
 			five seconds causes the test to run for five seconds,
 			wait for five seconds, and so on.  This tests RCU's
 			ability to transition abruptly to and from idle.
 
-	rcutorture.test_boost= [KNL,BOOT]
+	rcutorture.test_boost= [KNL]
 			Test RCU priority boosting?  0=no, 1=maybe, 2=yes.
 			"Maybe" means test if the RCU implementation
 			under test support RCU priority boosting.
 
-	rcutorture.test_boost_duration= [KNL,BOOT]
+	rcutorture.test_boost_duration= [KNL]
 			Duration (s) of each individual boost test.
 
-	rcutorture.test_boost_interval= [KNL,BOOT]
+	rcutorture.test_boost_interval= [KNL]
 			Interval (s) between each boost test.
 
-	rcutorture.test_no_idle_hz= [KNL,BOOT]
+	rcutorture.test_no_idle_hz= [KNL]
 			Test RCU's dyntick-idle handling.  See also the
 			rcutorture.shuffle_interval parameter.
 
-	rcutorture.torture_type= [KNL,BOOT]
+	rcutorture.torture_type= [KNL]
 			Specify the RCU implementation to test.
 
-	rcutorture.verbose= [KNL,BOOT]
+	rcutorture.verbose= [KNL]
 			Enable additional printk() statements.
 
+	rcupdate.rcu_expedited= [KNL]
+			Use expedited grace-period primitives, for
+			example, synchronize_rcu_expedited() instead
+			of synchronize_rcu().  This reduces latency,
+			but can increase CPU utilization, degrade
+			real-time latency, and degrade energy efficiency.
+
+	rcupdate.rcu_cpu_stall_suppress= [KNL]
+			Suppress RCU CPU stall warning messages.
+
+	rcupdate.rcu_cpu_stall_timeout= [KNL]
+			Set timeout for RCU CPU stall warning messages.
+
 	rdinit=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /init from the ramdisk,
@@ -3462,11 +3514,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			default x2apic cluster mode on platforms
 			supporting x2apic.
 
-	x86_mrst_timer= [X86-32,APBT]
-			Choose timer option for x86 Moorestown MID platform.
+	x86_intel_mid_timer= [X86-32,APBT]
+			Choose timer option for x86 Intel MID platform.
 			Two valid options are apbt timer only and lapic timer
 			plus one apbt timer for broadcast timer.
-			x86_mrst_timer=apbt_only | lapic_and_apbt
+			x86_intel_mid_timer=apbt_only | lapic_and_apbt
 
 	xen_emul_unplug=		[HW,X86,XEN]
 			Unplug Xen emulated devices
@@ -3480,6 +3532,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				the unplug protocol
 			never -- do not unplug even if version check succeeds
 
+	xen_nopvspin	[X86,XEN]
+			Disables the ticketlock slowpath using Xen PV
+			optimizations.
+
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]