dt-bindings: Add snapshot for 5.4-rc2

Add the device-tree bindings' snapshot from tmp-abe0ec5a8133 for
5.4-rc2.

Change-Id: I346809db756dd18a509ce440499d98a7fefecd16

bindings/soc/amlogic/clk-measure.txt

@@ -11,6 +11,7 @@ Required properties:
 			"amlogic,meson8b-clk-measure" for Meson8b SoCs
 			"amlogic,meson-axg-clk-measure" for AXG SoCs
 			"amlogic,meson-g12a-clk-measure" for G12a SoCs
+			"amlogic,meson-sm1-clk-measure" for SM1 SoCs
 - reg: base address and size of the Clock Measurer register space.
 
 Example:

bindings/soc/fsl/cpm_qe/qe.txt

@@ -18,7 +18,8 @@ Required properties:
 - reg : offset and length of the device registers.
 - bus-frequency : the clock frequency for QUICC Engine.
 - fsl,qe-num-riscs: define how many RISC engines the QE has.
-- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
+- fsl,qe-snums: This property has to be specified as '/bits/ 8' value,
+  defining the array of serial number (SNUM) values for the virtual
   threads.
 
 Optional properties:
@@ -34,6 +35,11 @@ Recommended properties
 - brg-frequency : the internal clock source frequency for baud-rate
   generators in Hz.
 
+Deprecated properties
+- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use
+  for the threads. Use fsl,qe-snums instead to not only specify the
+  number of snums, but also their values.
+
 Example:
      qe@e0100000 {
 	#address-cells = <1>;
@@ -44,6 +50,11 @@ Example:
 	reg = <e0100000 480>;
 	brg-frequency = <0>;
 	bus-frequency = <179A7B00>;
+	fsl,qe-snums = /bits/ 8 <
+		0x04 0x05 0x0C 0x0D 0x14 0x15 0x1C 0x1D
+		0x24 0x25 0x2C 0x2D 0x34 0x35 0x88 0x89
+		0x98 0x99 0xA8 0xA9 0xB8 0xB9 0xC8 0xC9
+		0xD8 0xD9 0xE8 0xE9>;
      }
 
 * Multi-User RAM (MURAM)

bindings/soc/qcom/qcom,aoss-qmp.txt

@@ -15,7 +15,10 @@ power-domains.
 - compatible:
 	Usage: required
 	Value type: <string>
-	Definition: must be "qcom,sdm845-aoss-qmp"
+	Definition: must be one of:
+		    "qcom,sc7180-aoss-qmp"
+		    "qcom,sdm845-aoss-qmp"
+		    "qcom,sm8150-aoss-qmp"
 
 - reg:
 	Usage: required

bindings/soc/ti/sci-pm-domain.txt

@@ -19,8 +19,15 @@ child of the pmmc node.
 Required Properties:
 --------------------
 - compatible: should be "ti,sci-pm-domain"
-- #power-domain-cells: Must be 1 so that an id can be provided in each
-		       device node.
+- #power-domain-cells: Can be one of the following:
+			1: Containing the device id of each node
+			2: First entry should be device id
+			   Second entry should be one of the floowing:
+			   TI_SCI_PD_EXCLUSIVE: To allow device to be
+						exclusively controlled by
+						the requesting hosts.
+			   TI_SCI_PD_SHARED: To allow device to be shared
+					     by multiple hosts.
 
 Example (K2G):
 -------------